Related
I am writing a method that takes in a List of Twitter Status objects as a parameter, opens a log file containing String represenatations of Tweets, checks if any of the String representations of the Status objects are already written to the file - if so, it removes them from the list, if not it appends the Status to the file.
Everything is working up until I attempt to write to the file. Nothing is being written at all. I am led to believe that it is due to the method having the file open in two different places: new File("tweets.txt") and new FileWriter("tweets.txt, true).
Here is my method:
private List<Status> removeDuplicates(List<Status> mentions) {
File mentionsFile = new File("tweets.txt");
try {
mentionsFile.createNewFile();
} catch (IOException e1) {
// Print error + stacktrace
}
List<String> fileLines = new ArrayList<>();
try {
Scanner scanner = new Scanner(mentionsFile);
while (scanner.hasNextLine()) {
fileLines.add(scanner.nextLine());
}
scanner.close();
} catch (FileNotFoundException e) {
// Print error + stacktrace
}
List<Status> duplicates = new ArrayList<>();
for (Status mention : mentions) {
String mentionString = "#" + mention.getUser().getScreenName() + " \"" + mention.getText() + "\" (" + mention.getCreatedAt() + "\")";
if (fileLines.contains(mentionString)) {
duplicates.add(mention);
} else {
try {
Writer writer = new BufferedWriter(new FileWriter("tweets.txt", true));
writer.write(mentionString);
} catch (IOException e) {
// Print error + stacktrace
}
}
}
mentions.removeAll(duplicates);
return mentions;
}
I wrote here few thoughts looking your code.
Remember to always close the object Reader and Writer.
Have a look at try-with-resources statement :
try (Writer writer = new BufferedWriter(new FileWriter("tweets.txt", true))) {
writer.write(mentionString);
} catch (IOException e) {
// Print error + stacktrace
}
To read an entire file in a List<String>:
List<String> lines = Files.readAllLines(Paths.get("tweets.txt"), StandardCharsets.UTF_8);
And again, I think it's a bad practice write in the same file you're reading of.
I would suggest to write in a different file if you don't have a particular constraint.
But if you really want have this behavior there are few alternative.
Create a temporary file as output and, when you process is successfully completed, than move it to the old one using Files.move(from, to).
In Java, I have text from a text field in a String variable called "text".
How can I save the contents of the "text" variable to a file?
If you're simply outputting text, rather than any binary data, the following will work:
PrintWriter out = new PrintWriter("filename.txt");
Then, write your String to it, just like you would to any output stream:
out.println(text);
You'll need exception handling, as ever. Be sure to call out.close() when you've finished writing.
If you are using Java 7 or later, you can use the "try-with-resources statement" which will automatically close your PrintStream when you are done with it (ie exit the block) like so:
try (PrintWriter out = new PrintWriter("filename.txt")) {
out.println(text);
}
You will still need to explicitly throw the java.io.FileNotFoundException as before.
Apache Commons IO contains some great methods for doing this, in particular FileUtils contains the following method:
static void writeStringToFile(File file, String data, Charset charset)
which allows you to write text to a file in one method call:
FileUtils.writeStringToFile(new File("test.txt"), "Hello File", Charset.forName("UTF-8"));
You might also want to consider specifying the encoding for the file as well.
In Java 7 you can do this:
String content = "Hello File!";
String path = "C:/a.txt";
Files.write( Paths.get(path), content.getBytes());
There is more info here:
http://www.drdobbs.com/jvm/java-se-7-new-file-io/231600403
Take a look at the Java File API
a quick example:
try (PrintStream out = new PrintStream(new FileOutputStream("filename.txt"))) {
out.print(text);
}
Just did something similar in my project. Use FileWriter will simplify part of your job. And here you can find nice tutorial.
BufferedWriter writer = null;
try
{
writer = new BufferedWriter( new FileWriter( yourfilename));
writer.write( yourstring);
}
catch ( IOException e)
{
}
finally
{
try
{
if ( writer != null)
writer.close( );
}
catch ( IOException e)
{
}
}
Use FileUtils.writeStringToFile() from Apache Commons IO. No need to reinvent this particular wheel.
In Java 11 the java.nio.file.Files class was extended by two new utility methods to write a string into a file. The first method (see JavaDoc here) uses the charset UTF-8 as default:
Files.writeString(Path.of("my", "path"), "My String");
And the second method (see JavaDoc here) allows to specify an individual charset:
Files.writeString(Path.of("my", "path"), "My String", StandardCharset.ISO_8859_1);
Both methods have an optional Varargs parameter for setting file handling options (see JavaDoc here). The following example would create a non-existing file or append the string to an existing one:
Files.writeString(Path.of("my", "path"), "String to append", StandardOpenOption.CREATE, StandardOpenOption.APPEND);
You can use the modify the code below to write your file from whatever class or function is handling the text. One wonders though why the world needs a new text editor...
import java.io.*;
public class Main {
public static void main(String[] args) {
try {
String str = "SomeMoreTextIsHere";
File newTextFile = new File("C:/thetextfile.txt");
FileWriter fw = new FileWriter(newTextFile);
fw.write(str);
fw.close();
} catch (IOException iox) {
//do stuff with exception
iox.printStackTrace();
}
}
}
I prefer to rely on libraries whenever possible for this sort of operation. This makes me less likely to accidentally omit an important step (like mistake wolfsnipes made above). Some libraries are suggested above, but my favorite for this kind of thing is Google Guava. Guava has a class called Files which works nicely for this task:
// This is where the file goes.
File destination = new File("file.txt");
// This line isn't needed, but is really useful
// if you're a beginner and don't know where your file is going to end up.
System.out.println(destination.getAbsolutePath());
try {
Files.write(text, destination, Charset.forName("UTF-8"));
} catch (IOException e) {
// Useful error handling here
}
Using Java 7:
public static void writeToFile(String text, String targetFilePath) throws IOException
{
Path targetPath = Paths.get(targetFilePath);
byte[] bytes = text.getBytes(StandardCharsets.UTF_8);
Files.write(targetPath, bytes, StandardOpenOption.CREATE);
}
In case if you need create text file based on one single string:
import java.io.IOException;
import java.nio.file.Files;
import java.nio.file.Paths;
public class StringWriteSample {
public static void main(String[] args) {
String text = "This is text to be saved in file";
try {
Files.write(Paths.get("my-file.txt"), text.getBytes());
} catch (IOException e) {
e.printStackTrace();
}
}
}
Use Apache Commons IO api. Its simple
Use API as
FileUtils.writeStringToFile(new File("FileNameToWrite.txt"), "stringToWrite");
Maven Dependency
<dependency>
<groupId>commons-io</groupId>
<artifactId>commons-io</artifactId>
<version>2.4</version>
</dependency>
Use this, it is very readable:
import java.nio.file.Files;
import java.nio.file.Paths;
Files.write(Paths.get(path), lines.getBytes(), StandardOpenOption.WRITE);
import java.io.*;
private void stringToFile( String text, String fileName )
{
try
{
File file = new File( fileName );
// if file doesnt exists, then create it
if ( ! file.exists( ) )
{
file.createNewFile( );
}
FileWriter fw = new FileWriter( file.getAbsoluteFile( ) );
BufferedWriter bw = new BufferedWriter( fw );
bw.write( text );
bw.close( );
//System.out.println("Done writing to " + fileName); //For testing
}
catch( IOException e )
{
System.out.println("Error: " + e);
e.printStackTrace( );
}
} //End method stringToFile
You can insert this method into your classes. If you are using this method in a class with a main method, change this class to static by adding the static key word. Either way you will need to import java.io.* to make it work otherwise File, FileWriter and BufferedWriter will not be recognized.
You could do this:
import java.io.*;
import java.util.*;
class WriteText
{
public static void main(String[] args)
{
try {
String text = "Your sample content to save in a text file.";
BufferedWriter out = new BufferedWriter(new FileWriter("sample.txt"));
out.write(text);
out.close();
}
catch (IOException e)
{
System.out.println("Exception ");
}
return ;
}
};
Using org.apache.commons.io.FileUtils:
FileUtils.writeStringToFile(new File("log.txt"), "my string", Charset.defaultCharset());
If you only care about pushing one block of text to file, this will overwrite it each time.
JFileChooser chooser = new JFileChooser();
int returnVal = chooser.showSaveDialog(this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
FileOutputStream stream = null;
PrintStream out = null;
try {
File file = chooser.getSelectedFile();
stream = new FileOutputStream(file);
String text = "Your String goes here";
out = new PrintStream(stream);
out.print(text); //This will overwrite existing contents
} catch (Exception ex) {
//do something
} finally {
try {
if(stream!=null) stream.close();
if(out!=null) out.close();
} catch (Exception ex) {
//do something
}
}
}
This example allows the user to select a file using a file chooser.
Basically the same answer as here, but easy to copy/paste, and it just works ;-)
import java.io.FileWriter;
public void saveToFile(String data, String filename) {
try (
FileWriter fw = new FileWriter(filename)) {
fw.write(data);
} catch (Exception e) {
throw new RuntimeException(e);
}
}
private static void generateFile(String stringToWrite, String outputFile) {
try {
FileWriter writer = new FileWriter(outputFile);
writer.append(stringToWrite);
writer.flush();
writer.close();
log.debug("New File is generated ==>"+outputFile);
} catch (Exception exp) {
log.error("Exception in generateFile ", exp);
}
}
It's better to close the writer/outputstream in a finally block, just in case something happen
finally{
if(writer != null){
try{
writer.flush();
writer.close();
}
catch(IOException ioe){
ioe.printStackTrace();
}
}
}
I think the best way is using Files.write(Path path, Iterable<? extends CharSequence> lines, OpenOption... options):
String text = "content";
Path path = Paths.get("path", "to", "file");
Files.write(path, Arrays.asList(text));
See javadoc:
Write lines of text to a file. Each line is a char sequence and is
written to the file in sequence with each line terminated by the
platform's line separator, as defined by the system property
line.separator. Characters are encoded into bytes using the specified
charset.
The options parameter specifies how the the file is created or opened.
If no options are present then this method works as if the CREATE,
TRUNCATE_EXISTING, and WRITE options are present. In other words, it
opens the file for writing, creating the file if it doesn't exist, or
initially truncating an existing regular-file to a size of 0. The
method ensures that the file is closed when all lines have been
written (or an I/O error or other runtime exception is thrown). If an
I/O error occurs then it may do so after the file has created or
truncated, or after some bytes have been written to the file.
Please note. I see people have already answered with Java's built-in Files.write, but what's special in my answer which nobody seems to mention is the overloaded version of the method which takes an Iterable of CharSequence (i.e. String), instead of a byte[] array, thus text.getBytes() is not required, which is a bit cleaner I think.
If you wish to keep the carriage return characters from the string into a file
here is an code example:
jLabel1 = new JLabel("Enter SQL Statements or SQL Commands:");
orderButton = new JButton("Execute");
textArea = new JTextArea();
...
// String captured from JTextArea()
orderButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
// When Execute button is pressed
String tempQuery = textArea.getText();
tempQuery = tempQuery.replaceAll("\n", "\r\n");
try (PrintStream out = new PrintStream(new FileOutputStream("C:/Temp/tempQuery.sql"))) {
out.print(tempQuery);
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
System.out.println(tempQuery);
}
});
I have published a library that saves files, and handles everything with one line of code only, you can find it here along with its documentation
Github repository
and the answer to your question is so easy
String path = FileSaver
.get()
.save(string.getBytes(),"file.txt");
My way is based on stream due to running on all Android versions and needs of fecthing resources such as URL/URI, any suggestion is welcome.
As far as concerned, streams (InputStream and OutputStream) transfer binary data, when developer goes to write a string to a stream, must first convert it to bytes, or in other words encode it.
public boolean writeStringToFile(File file, String string, Charset charset) {
if (file == null) return false;
if (string == null) return false;
return writeBytesToFile(file, string.getBytes((charset == null) ? DEFAULT_CHARSET:charset));
}
public boolean writeBytesToFile(File file, byte[] data) {
if (file == null) return false;
if (data == null) return false;
FileOutputStream fos;
BufferedOutputStream bos;
try {
fos = new FileOutputStream(file);
bos = new BufferedOutputStream(fos);
bos.write(data, 0, data.length);
bos.flush();
bos.close();
fos.close();
} catch (IOException e) {
e.printStackTrace();
Logger.e("!!! IOException");
return false;
}
return true;
}
I have the following Java code which iterates through all the files in a directory and deletes them.
for(File file : tmpDir.listFiles())
{
file.delete();
}
It does however not delete all files. Some, usually 20-30, out of a couple of thousand, are left behind when I do this. Is it possible to fix this, or have I stumbled upon some Java voodoo that is best left alone?
It returns a boolean value, you should check that. From the JavaDoc:
Returns:
true if and only if the file or directory is successfully deleted; false otherwise
You should check the value of the return and take action.
If it returns false it may well be that you do not have permission to delete the file.
In that case you can check whether the file is writeable by the application and if not attempt to make it writeable - again this returns a boolean. If successful you can try deleting again.
You could use a utility method:
private void deleteFile(final File f) throws IOException {
if (f.delete()) {
return;
}
if (!f.canWrite() && !f.setWritable(true)) {
throw new IOException("No write permissions on file '" + f + "' and cannot set writeable.");
}
if (!f.delete()) {
throw new IOException("Failed to delete file '" + f + "' even after setting writeable; file may be locked.");
}
}
I would also take their advice in the JavaDoc:
Note that the Files class defines the delete method to throw an
IOException when a file cannot be deleted. This is useful for error
reporting and to diagnose why a file cannot be deleted.
Provided that you are using Java 7 that is. That method throws a number of exceptions that you can handle:
try {
Files.delete(path);
} catch (NoSuchFileException x) {
System.err.format("%s: no such" + " file or directory%n", path);
} catch (DirectoryNotEmptyException x) {
System.err.format("%s not empty%n", path);
} catch (IOException x) {
// File permission problems are caught here.
System.err.println(x);
}
Example taken from the Oracle tutorial page.
Forcing the garbage collector to run using System.gc(); made all the files deletable.
Make sure that you don't have any open stream like BufferedReader/Writer, FileReader/Writer etc. First close them, then you should be able to delete the file.
One more point, E.g. if you open a BufferedReader via another reader like FileReader, you must close both of the readers seperately.
So instead of this:
BufferedReader reader = new BufferedReader(new FileReader(new File(filePath)););
do this:
BufferedReader bufferedReader = null;
FileReader fileReader = null;
try{
fileReader = new FileReader(readFile);
bufferedReader = new BufferedReader(fileReader);
}catch{...}
...
try {
fileReader.close();
bufferedReader .close();
readFile.delete();
} catch (IOException e) {
e.printStackTrace();
}
private static void deleteProxy(File proxyOld, String host, int port) {
try {
String lines, tempAdd;
boolean removeLine = false;
File proxyNew = new File("proxies_" + "cleaner$tmp");
BufferedReader fileStream = new BufferedReader(new InputStreamReader(new FileInputStream(proxyOld)));
BufferedWriter replace = new BufferedWriter(new FileWriter(proxyNew));
while ((lines = fileStream.readLine()) != null) {
tempAdd = lines.trim();
if (lines.trim().equals(host + ":" + port)) {
removeLine = true;
}
if (!removeLine) {
replace.write(tempAdd);
replace.newLine();
}
}
fileStream.close();
replace.close();
proxyOld.delete();
proxyNew.renameTo(proxyOld);
} catch (Exception e) {
e.printStackTrace();
}
}
Calling the function:
File x = new File("proxies.txt");//is calling a new file the reason why it's being flushed out?
deleteProxy(x, host, port);
Before I run the program the file proxies.txt had data inside of it. However when I run the program it appears to be flushed out. It becomes empty.
I noticed while the program is running, if I move my mouse over the file proxies.txt, Windows displays the "Date Modified" and the time it displays is the current time, or last time the function deleteProxy(...) was executed.
Does anyone know what I'm doing wrong? And why won't the list update instead of appearing to be empty?
Updated code:
private static void deleteProxy(File proxyOld, String host, int port) {
try {
String lines, tempAdd;
boolean removeLine = false;
File proxyNew = new File("proxies_" + "cleaner$tmp");
FileInputStream in = new FileInputStream(proxyOld);
InputStreamReader read = new InputStreamReader(in);
BufferedReader fileStream = new BufferedReader(read);
FileWriter write = new FileWriter(proxyNew);
BufferedWriter replace = new BufferedWriter(write);
while ((lines = fileStream.readLine()) != null) {
tempAdd = lines.trim();
if (lines.trim().equals(host + ":" + port)) {
removeLine = true;
}
if (!removeLine) {
replace.write(tempAdd);
replace.newLine();
}
}
in.close();
read.close();
fileStream.close();
write.close();
replace.close();
if (proxyOld.delete()) {
throw new Exception("Error deleting " + proxyOld);
}
if (proxyNew.renameTo(proxyOld)) {
throw new Exception("Error renaming " + proxyOld);
}
} catch (Exception e) {
e.printStackTrace();
}
}
Running the updated code it deletes proxies.txt just fine but it fails to make the new file:\
Maybe I should find a new method to update a text file, do you have any suggestions?
Your rename operation may not work, as per the File.renameTo() documentation:
Many aspects of the behavior of this method are inherently platform-dependent: The rename operation might not be able to move a file from one filesystem to another, it might not be atomic, and it might not succeed if a file with the destination abstract pathname already exists. The return value should always be checked to make sure that the rename operation was successful.
So basically, you're wiping your old file, and you're not guaranteed the new file will take its place. You must check the return value of File.renameTo():
if(proxyNew.renameTo(proxyOld)){
throw new Exception("Could not rename proxyNew to proxyOld");
}
As for why your renameTo may be failing: you're not closing the nested set of streams that you open to read from the old file, so the operating system may still consider an abstract pathname to exist. Try making sure you close all of the nested streams you open.
Try this:
FileInputStream in = new FileInputStream(proxyOld);
BufferedReader fileStream = new BufferedReader(new InputStreamReader(in));
...
in.close();
In Java, I have text from a text field in a String variable called "text".
How can I save the contents of the "text" variable to a file?
If you're simply outputting text, rather than any binary data, the following will work:
PrintWriter out = new PrintWriter("filename.txt");
Then, write your String to it, just like you would to any output stream:
out.println(text);
You'll need exception handling, as ever. Be sure to call out.close() when you've finished writing.
If you are using Java 7 or later, you can use the "try-with-resources statement" which will automatically close your PrintStream when you are done with it (ie exit the block) like so:
try (PrintWriter out = new PrintWriter("filename.txt")) {
out.println(text);
}
You will still need to explicitly throw the java.io.FileNotFoundException as before.
Apache Commons IO contains some great methods for doing this, in particular FileUtils contains the following method:
static void writeStringToFile(File file, String data, Charset charset)
which allows you to write text to a file in one method call:
FileUtils.writeStringToFile(new File("test.txt"), "Hello File", Charset.forName("UTF-8"));
You might also want to consider specifying the encoding for the file as well.
In Java 7 you can do this:
String content = "Hello File!";
String path = "C:/a.txt";
Files.write( Paths.get(path), content.getBytes());
There is more info here:
http://www.drdobbs.com/jvm/java-se-7-new-file-io/231600403
Take a look at the Java File API
a quick example:
try (PrintStream out = new PrintStream(new FileOutputStream("filename.txt"))) {
out.print(text);
}
Just did something similar in my project. Use FileWriter will simplify part of your job. And here you can find nice tutorial.
BufferedWriter writer = null;
try
{
writer = new BufferedWriter( new FileWriter( yourfilename));
writer.write( yourstring);
}
catch ( IOException e)
{
}
finally
{
try
{
if ( writer != null)
writer.close( );
}
catch ( IOException e)
{
}
}
Use FileUtils.writeStringToFile() from Apache Commons IO. No need to reinvent this particular wheel.
In Java 11 the java.nio.file.Files class was extended by two new utility methods to write a string into a file. The first method (see JavaDoc here) uses the charset UTF-8 as default:
Files.writeString(Path.of("my", "path"), "My String");
And the second method (see JavaDoc here) allows to specify an individual charset:
Files.writeString(Path.of("my", "path"), "My String", StandardCharset.ISO_8859_1);
Both methods have an optional Varargs parameter for setting file handling options (see JavaDoc here). The following example would create a non-existing file or append the string to an existing one:
Files.writeString(Path.of("my", "path"), "String to append", StandardOpenOption.CREATE, StandardOpenOption.APPEND);
You can use the modify the code below to write your file from whatever class or function is handling the text. One wonders though why the world needs a new text editor...
import java.io.*;
public class Main {
public static void main(String[] args) {
try {
String str = "SomeMoreTextIsHere";
File newTextFile = new File("C:/thetextfile.txt");
FileWriter fw = new FileWriter(newTextFile);
fw.write(str);
fw.close();
} catch (IOException iox) {
//do stuff with exception
iox.printStackTrace();
}
}
}
I prefer to rely on libraries whenever possible for this sort of operation. This makes me less likely to accidentally omit an important step (like mistake wolfsnipes made above). Some libraries are suggested above, but my favorite for this kind of thing is Google Guava. Guava has a class called Files which works nicely for this task:
// This is where the file goes.
File destination = new File("file.txt");
// This line isn't needed, but is really useful
// if you're a beginner and don't know where your file is going to end up.
System.out.println(destination.getAbsolutePath());
try {
Files.write(text, destination, Charset.forName("UTF-8"));
} catch (IOException e) {
// Useful error handling here
}
Using Java 7:
public static void writeToFile(String text, String targetFilePath) throws IOException
{
Path targetPath = Paths.get(targetFilePath);
byte[] bytes = text.getBytes(StandardCharsets.UTF_8);
Files.write(targetPath, bytes, StandardOpenOption.CREATE);
}
In case if you need create text file based on one single string:
import java.io.IOException;
import java.nio.file.Files;
import java.nio.file.Paths;
public class StringWriteSample {
public static void main(String[] args) {
String text = "This is text to be saved in file";
try {
Files.write(Paths.get("my-file.txt"), text.getBytes());
} catch (IOException e) {
e.printStackTrace();
}
}
}
Use Apache Commons IO api. Its simple
Use API as
FileUtils.writeStringToFile(new File("FileNameToWrite.txt"), "stringToWrite");
Maven Dependency
<dependency>
<groupId>commons-io</groupId>
<artifactId>commons-io</artifactId>
<version>2.4</version>
</dependency>
Use this, it is very readable:
import java.nio.file.Files;
import java.nio.file.Paths;
Files.write(Paths.get(path), lines.getBytes(), StandardOpenOption.WRITE);
import java.io.*;
private void stringToFile( String text, String fileName )
{
try
{
File file = new File( fileName );
// if file doesnt exists, then create it
if ( ! file.exists( ) )
{
file.createNewFile( );
}
FileWriter fw = new FileWriter( file.getAbsoluteFile( ) );
BufferedWriter bw = new BufferedWriter( fw );
bw.write( text );
bw.close( );
//System.out.println("Done writing to " + fileName); //For testing
}
catch( IOException e )
{
System.out.println("Error: " + e);
e.printStackTrace( );
}
} //End method stringToFile
You can insert this method into your classes. If you are using this method in a class with a main method, change this class to static by adding the static key word. Either way you will need to import java.io.* to make it work otherwise File, FileWriter and BufferedWriter will not be recognized.
You could do this:
import java.io.*;
import java.util.*;
class WriteText
{
public static void main(String[] args)
{
try {
String text = "Your sample content to save in a text file.";
BufferedWriter out = new BufferedWriter(new FileWriter("sample.txt"));
out.write(text);
out.close();
}
catch (IOException e)
{
System.out.println("Exception ");
}
return ;
}
};
Using org.apache.commons.io.FileUtils:
FileUtils.writeStringToFile(new File("log.txt"), "my string", Charset.defaultCharset());
If you only care about pushing one block of text to file, this will overwrite it each time.
JFileChooser chooser = new JFileChooser();
int returnVal = chooser.showSaveDialog(this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
FileOutputStream stream = null;
PrintStream out = null;
try {
File file = chooser.getSelectedFile();
stream = new FileOutputStream(file);
String text = "Your String goes here";
out = new PrintStream(stream);
out.print(text); //This will overwrite existing contents
} catch (Exception ex) {
//do something
} finally {
try {
if(stream!=null) stream.close();
if(out!=null) out.close();
} catch (Exception ex) {
//do something
}
}
}
This example allows the user to select a file using a file chooser.
Basically the same answer as here, but easy to copy/paste, and it just works ;-)
import java.io.FileWriter;
public void saveToFile(String data, String filename) {
try (
FileWriter fw = new FileWriter(filename)) {
fw.write(data);
} catch (Exception e) {
throw new RuntimeException(e);
}
}
private static void generateFile(String stringToWrite, String outputFile) {
try {
FileWriter writer = new FileWriter(outputFile);
writer.append(stringToWrite);
writer.flush();
writer.close();
log.debug("New File is generated ==>"+outputFile);
} catch (Exception exp) {
log.error("Exception in generateFile ", exp);
}
}
It's better to close the writer/outputstream in a finally block, just in case something happen
finally{
if(writer != null){
try{
writer.flush();
writer.close();
}
catch(IOException ioe){
ioe.printStackTrace();
}
}
}
I think the best way is using Files.write(Path path, Iterable<? extends CharSequence> lines, OpenOption... options):
String text = "content";
Path path = Paths.get("path", "to", "file");
Files.write(path, Arrays.asList(text));
See javadoc:
Write lines of text to a file. Each line is a char sequence and is
written to the file in sequence with each line terminated by the
platform's line separator, as defined by the system property
line.separator. Characters are encoded into bytes using the specified
charset.
The options parameter specifies how the the file is created or opened.
If no options are present then this method works as if the CREATE,
TRUNCATE_EXISTING, and WRITE options are present. In other words, it
opens the file for writing, creating the file if it doesn't exist, or
initially truncating an existing regular-file to a size of 0. The
method ensures that the file is closed when all lines have been
written (or an I/O error or other runtime exception is thrown). If an
I/O error occurs then it may do so after the file has created or
truncated, or after some bytes have been written to the file.
Please note. I see people have already answered with Java's built-in Files.write, but what's special in my answer which nobody seems to mention is the overloaded version of the method which takes an Iterable of CharSequence (i.e. String), instead of a byte[] array, thus text.getBytes() is not required, which is a bit cleaner I think.
If you wish to keep the carriage return characters from the string into a file
here is an code example:
jLabel1 = new JLabel("Enter SQL Statements or SQL Commands:");
orderButton = new JButton("Execute");
textArea = new JTextArea();
...
// String captured from JTextArea()
orderButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent ae) {
// When Execute button is pressed
String tempQuery = textArea.getText();
tempQuery = tempQuery.replaceAll("\n", "\r\n");
try (PrintStream out = new PrintStream(new FileOutputStream("C:/Temp/tempQuery.sql"))) {
out.print(tempQuery);
} catch (FileNotFoundException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
System.out.println(tempQuery);
}
});
I have published a library that saves files, and handles everything with one line of code only, you can find it here along with its documentation
Github repository
and the answer to your question is so easy
String path = FileSaver
.get()
.save(string.getBytes(),"file.txt");
My way is based on stream due to running on all Android versions and needs of fecthing resources such as URL/URI, any suggestion is welcome.
As far as concerned, streams (InputStream and OutputStream) transfer binary data, when developer goes to write a string to a stream, must first convert it to bytes, or in other words encode it.
public boolean writeStringToFile(File file, String string, Charset charset) {
if (file == null) return false;
if (string == null) return false;
return writeBytesToFile(file, string.getBytes((charset == null) ? DEFAULT_CHARSET:charset));
}
public boolean writeBytesToFile(File file, byte[] data) {
if (file == null) return false;
if (data == null) return false;
FileOutputStream fos;
BufferedOutputStream bos;
try {
fos = new FileOutputStream(file);
bos = new BufferedOutputStream(fos);
bos.write(data, 0, data.length);
bos.flush();
bos.close();
fos.close();
} catch (IOException e) {
e.printStackTrace();
Logger.e("!!! IOException");
return false;
}
return true;
}