I'm evaluating Auth0 as an authentication/authorization service for our new project.
I would like to expose some REST APIs without UI at this point.
So I believe clients won't need to log-in but just send an authorization header with a JWT token (I'll send this token by e-mail at this point).
I understood that in Auth0 there are "non-interactive" clients for this (Am I right?)
In my understanding, every potential customer will be a client and I'll create a dedicated client configuration in Auth0 for it.
So I've created a client like this following the tutorial found here
(we've a java shop, so I've naturally opted for spring security) and it works.
Now I would like to put some metadata on such a client. I've tried to add the "Application Metadata".
I would like to access this metadata on server (from java Spring rest controller), but I see that its not in the JWT token
My question is what is the right implementation for this? How should I get this information on server?
Thanks in advance
I think you're mixing the notions of "Clients" and "Users". A Client in Auth0 is an access channel to the Auth0 back-end. In some (unusual) approaches to multi-tenancy you might go with multiple Auth0 clients, but I doubt it.
What I think you want is: One (1) Client and many Users.
The app_metadata are then associated with the User records.
Related
What I'm trying to do is to create an application with Angular frontend and Spring Boot backend with OAuth2 authentication.
The issue is that I don't know how to get on the frontend the ROLES user has so that I'll be able, for instance, to show something role-based on the page. Yes, there are scopes that OAuth provides in the response but the problem is that these scopes are for the CLIENT but not for the specific USER itself. And that CLIENT is my frontend side (correct me if I'm wrong) which basically means that every user operating my application(client) going to have the same scopes(roles). Moreover, I can specify roles on the backend with the help of Spring and UserDetailsService and then use those roles with #PreAuthorize, etc. But not on the frontend side.
Just as an example, if I simply used single JWT then with a token itself I'd return both the username and roles to frontend. And then I could store that data and use it on the frontend side according to my needs.
So what I'm asking is if it's actually possible and if this is correct to do so?
And how can I possibly implement such behavior?
OAuth doesn't solve this problem and it is best solved via claims in your API. OAuth should deal with authentication only. My below post may help you to think about the best separation: https://authguidance.com/2017/10/03/api-tokens-claims/
In a nutshell you will have to look up user rights such as roles after the OAuth processing completes.
There is a great video from Spring developer on YouTube about OAuth2/OpenID Connect. It shows how to implement the resource server using the newest Spring Security 5 solution.
Probably the easiest and the best way to achieve this is to use an OpenID Connect server which will provide all user management stuff. On the market there are many solutions. Auth0 and Okta are Identity Clouds which provides their services for small amount of money. On the other hand you have Keycloak, which is a server which you can install in Docker or even on bare metal - it's free and open-source.
I have a Java Spring driven REST API server connecting with PostgreSQL database and a Spring Web Server in Java that is serving content from the REST API to the client using JavaScript (now browsers, but in the future also mobile apps).
I've read a number of articles and topics how one can secure a REST API, but I haven't been able to make a final decision yet. I don't want to have Basic Authorization, because it doesn't make sense as I would need to store credentials in JavaScript that can be easily accessed and read by anyone entering the webpage and developer console. I'd like not to show any credentials to the end user so I can't keep them on the client's side.
I've read a lot about JWT and almost decided to implement it, but I've heard it has some drawbacks and haven't been so sure since then if it's the option I would like to choose. I know there is also oAuth 1.0 or oAuth 2.0 but I don't know if I want to have something this complicated. I would also like to store hashed user credentials in my own database in order not to be depended to any other credential providers like social media or Google.
Now I'm making another layer on my web server as a proxy hoping that it will allow me to authenticate user on this proxy level using Spring Security and having some kind or cookies or something to authenticate, but I'm not so sure if its doable this way and it increases the respond time, adds complexity and needs me to write controller methods for these endpoints. My architecture now is of the following:
Client (browser) -> Webserver -> REST API server -> db
I've also denied all external connections and allowed only localhost access to REST API on tomcat level so that I'd have to implement the security level only on the web server allowing free information transit between the webserver and REST API as it is not reachable anyway.
Web server and REST API are on the same server running as Tomcat instances.
I'm also not so sure if this kind of architecture will allow me to authenticate mobile app clients through the web server.
I would be very grateful for any piece of advice you would have for me in this matter. I'm not so experienced in security, so I'm a bit lost what I should do. Does this kind of architecture any sense or should I simply ask REST API directly from any type of clients, be it a webpage or a mobile app from different IPs and secure Rest API only? And if I want to secure some subpages of my webpage or parts of mobile app should that be an completely other layer?
Thank you for your help.
You have already gone through OAuth, JWT tokens etc. If you don't want to use them,then you can create your own token based authentication system.(say 'TokenHandler').
How this TokenHandler will work ?
TokenHandler will be like a gateway server i.e your every REST API request will route through this server application. So you will address your confusion of mobile and web application call with a authToken in header. Main responsibility of this server applciation is to accept the token and validate against the database where all token details are maintain. This DB will have information regarding timestamp when token was last used to validate, to decide your validation rule .
How Token will get generated ?
Token can be any random 64 digit alphanumeric string and will be generated and updated in DB during every single login activity. Login webservice returns this token in response body.
What can be rules for validation ?
It can be depending on your business logic. I preferred to keep active session window of 15 mins. Means if you access the webservice you will get active window of 15 more minutes. If you didn't access any service for 15 consecutive minutes then from 16th Minute you will need to login again to access further calls. This part can change according to requirements.
How client side will handle this ?
Client side will store this token and pass this token with every request call. Token Handler will validate and redirects it's request to the application server . So your one token handler can be used to server authentication of multiple applcation servers. This you can achieve by application end point identifer.
I will like to discuss further if you have any questions or suggestions .
Use API Gateway Architecture Pattern for your use case -
http://microservices.io/patterns/apigateway.html .
The API Gateway (The webserver in your question) can act as single entry point for all desktop/mobile clients. You can use either session cookies or jwts to authenticate clients at gateway.
With respect to authentication between gateway and micro services, and between micro services, i would suggest mutual ssl - https://www.codeproject.com/Articles/326574/An-Introduction-to-Mutual-SSL-Authentication. If you are using spring boot, this might help - http://www.opencodez.com/java/implement-2-way-authentication-using-ssl.htm
The problem with IP white-listing approach is that - it's not well suitable for cloud architecture as the IPs might change with every server reboot. Even if you are using dedicated IPs, you should be careful to secure the communication with SSL/TLS, else attackers can easily sniff your traffic.
Setup
We're developing a distributed application with Java and Spring where our existing client front end (complete with its own authentication, database, accounts, etc.) uses REST calls to access our new server for additional services. We want to protect these resources with Oauth.
Access should be restricted by role or account. However we don't want the user on the client side to have to worry about any additional authentication apart from the already existing account. At the same time we need to provide a means for third party applications to access some resources from the outside after going through some kind of registration against the server (which is why we're distributing in the first place).
So we have set up spring security on the server side to provide accounts that should be used to restrict access to the resources. The user should log in on the client side and then be able to access only those server resources assigned to him. We have some kind of registration process that sets up the user on the client side to be able to access the server services so any account setup I think should be done there.
So the questions are
How can I enable the client side to obtain an access token for the protected resources without the user having to log in to his server-side account?
And how do I setup the server side account without needing any user input?
My thoughts
This won't do
I'm thinking I'll have to either tell the client about a new account created on the server side for that user (but then, how would I choose and communicate a password?) or synchronize the client side account to the server, and use those credentials to authenticate the client against the server and generate access tokens. But how save can that be? Also the server has a much higher security (one way encrypted, salted passwords) on its accounts and I don't really want to compromise this by using the less save client accounts.
Maybe this will?
Maybe the way to go will be to tell the server about the client account during the first authentication, create an account on the server side, store the generated token on the client side and then authenticate the client against the server with that token for each subsequent request..? Will the server be able to log-in the client using its server-side account via that token for each request?
I'd need a special resource for that initial (2-legged?) handshake that can only be accessed from the client server, right?
Also:
Which would be better suited for the task, OAuth 1 or 2?
I'm hoping someone understands my problem and can help me sort through possible missunderstandings and knowledge gaps (I'm reading through Oauth and spring security documentations right now, so I'll update if I come up with a clearer picture and thus clearer questions of what to do)
Thanks for any help!
So our current status is to use OAuth2 mostly for reasons of simplicity. We're also sure that the flaws it might have concerning security we can cover ourselves as needed and they will most likely be addressed in the future by the implementation vendors or the IETF.
To handle the communication between REST server and REST client (both in our control) we use the formerly known as 2-legged authentication, now client credentials grant. I've asked a few questions on SO about that including
our current spring-security context setup
the client credentials flow in particular
the use of long lived tokens versus reauthentication
and how to limit REST access by HTTP method
Concerning the use of client based user accounts for authentication against the server we didn't get any further.
For now we authenticate the user against our old client web application as before and then authenticate the client against the server 2-legged. In theory this will allow any user to access any resource using the client accesstoken but for now that's okay for us so we will not investigate further down that road.
Still, should anyone have a good idea on how this might be solved we'll pick it up, just to tighten security further. So, I'll leave this question open.
My thoughts currently are along the line of registering a new client ID for each user on the authentication server with a generated secret and then synchronize those back to the client server and use those client_id / secret combinations to access resources for a user represented by the generated client_id in a client credentials flow.
For our latest application we'll store accounts on the REST server (authentication provider) and have the user login against that server and then use the token to access the REST resources as intended by the spec.
I'm developing a html5+jquery+phonegap application. Server side is written in java and Spring MVC.And I hope to implement an authentication model as follows.
client signs up using his email which would be used as his userID.
A token is sent to his email.
He is given a screen to enter the token.
That token is stored in the local storage of the client.
everytime the client calls a webservice, his userID and token is sent by the app over https.
Server authenticates him and responds.
What are the options available to implment this kind of security from the server side? can Spring-security be used in this way? I tried to find any implmentation with Spring-security, but couldn't find any implmentation other than basic authentication.
You can use PreAuthenticationProcessingFilter to achieve this requirement, have a look similar case and spring security doc
What is the best way to do authentication and authorization in web services?
I am developing a set of web services, requiring role based access control.
Using metro - SOAP, simple java without EJBs.
I want to Authenticate the user just one time, using username and
password, to be matched against a data base. In the subsequent calls.
I would like to use some kind of session management. Could be some
session id, retrieved to the client at login, to be presented in all
calls.
So Far:
Read authentication using a database - but I want application level validation;
Read application authentication with jax-ws - but i don't want to do the authentication mechanism every time;
I think I can use a SOAP Handler, to intercept all the messages, and do the authorization control in the hander, using some session identifier token, that comes with the message, that can be matched against an identifier saved in the data base, in the login web method.
EDIT:
I still have some questions:
How to know the name of the web method being called?
What kind of token should I use?
How to pass this token between calls?
EDIT 2
Because of #ag112 answer:
I'm using Glassfish.
I use WS-Policy and WS-Security to encrypt and sign the messages. Using Mutual Certificate Authentication. I would like to complement this message level security between applications, with the authentication and authorization for the users also in message level.
I am just developing the services, and I don't know almost nothing the clients, just that they could be created in different languages.
At this point I think the most important thing is to do what ever I need to do to authenticate and authentication the users, I the most easy way to be implemented for the client applications.
#Luis: Here are my inputs.
Well exact solution for your problem depends upon kind of web service clients you expect, do you have control over web service client system, your app server etc.....but assuming you don't have any control over web service client, for you it is just a SOAP message over HTTP transport, here is probable solution.
You can of course performs session management & authentication at message level or transport level. It means either you can have session token and auth token information in SOAP message or you can use standard HTTP Session and HTTP authentication mechanism.
Of course transport level solution is much simpler and industry wide standard in case if transport layer is HTTP. For message level, ws specifications like ws-security can be used.
Your each web service request is simple HTTP GET/POST identified by a unique HTTP URI.
Typically in jax-ws metro environment, WSServlet is one which entry servlet for any web service call and which eventually delegates the call to right service provider implementation class. Since you application is going to be deployed in web server, you can exploit all session and authentication facilities provided by J2ee web container.
Since you are looking for role-based access control, I would use standard <web-resource-collection> in web.xml to specify which role you would like to have in case of particular HTTP URI. You can use standard JAAS login module which can do authentication and populates the JAAS subject with role. If user name/password are provided in SOAP XML, JAAS login module can also search/parse SOAP XML to retrieve those information. JAAS/app server will automatically create auth token and store it as cookie so that each subsequent request need not to go through authentication process again. This is all J2ee standard. You can find plenty of help on internet on this. Please let me know your app server so that I can provide you additional details.
If you still want to use SOAP message level session management, authentication & authorization process, then to provide you more details, may I know more details about your client side.
EDIT1:
Well based on your further inputs, here is my more thoughts:
Message security namely encryption and signature needs to happen each message travels between server and client. where as message authentication- you intend to do once and give a session token/auth token to client for subsequent calls.
Question still remains: if you put a unique session Identifier in SOAP response of first time authentication, do you expect client to parse SOAP response XML and ensure that client should send you session identifier each time in subsequent SOAP requests.
OR
You want to keep session management transparent to client and for client it needs to send username/password token first time and subsequent calls need not require any username/password token. In this case you would need to rely on transport based session management for e.g. HTTP cookies
Now what is the best for you depends upon your use case. Can you tell me what is expected use case flow? how another system (web service client) makes more than one service call to your system? Is another system user driven/some background process? What is exact need that you want only first service call to go through authentication process not subsequent calls?
PS: Glassfish server provides a way of configuring message authentication provider which automatically enables/disables message level authentication.
EDIT2:
I understand you do not want to store user credentials in client app and web service server need those user credentials.
OAuth is open standard protocol which allows site A to access user's private data on site B. Ultimate idea is site A gets auth token which has specific expiry time. So Token containing encrypted from of user credentials or jsession id help you avoid need of re-authentication. You only need to decide where you want to keep token at client app side
You can keep token as cookie if transport is HTTP protocol.
Having said that ofcourse passing user credentials each time seems bit easier and straight forward.
You can also go for OpenEJB.
It used JAAS with WS-Security.
I hope the link is useful.
After all the help, I create this answer to simplify, and summarize all the ideas that was discussed.
The questions has 2 requisites:
Message level security;
One time authentication.
With ag112 help, this is hard to do, or to elegant in any way. So here are to conclusions:
For message level security send the user
credentials every time (place it in SOAP header);
For one time authentication use transport level security, and do a
session management.
I prefer the first one, because the message level was the biggest requisite.
As had no answers, following #unhillbilly advise, I answer my own question, with the progress so far:
How to know the name of the web method
being called;
Using a SOAP handler, finding the name of the first element in the body.
What kind of token should I use;
I decide to use a 128 bits token, representing each session. The Webservices, continue to be session-less, the key is just for authorizations purposes.
How to pass this token between calls.
For the login web method the result has the token, in each subsequent calls, the token is a parameter.
is there a better answer?