Develop Reference

Enumerate Custom Slot Values from Speechlet

Is there any way to inspect or enumerate the Custom Slot Values that are set-up in your interaction model? For Instance, Say you have an intent schema with the following intent:
{
"intent": "MySuperCoolIntent",
"slots":
[
{
"name": "ShapesNSuch",
"type": "LIST_OF_SHAPES"
}
]
}
Furthermore, you've defined the LIST_OF_SHAPES Custom Slot to have the following Values:
SQUARE
TRIANGLE
CIRCLE
ICOSADECAHECKASPECKAHEDRON
ROUND
HUSKY
Question: is there a method I can call from my Speechlet or my RequestStreamHandler that will give me an enumeration of those Custom Slot Values??
I have looked through the Alexa Skills Kit's SDK Javadocs Located Here
And I'm not finding anything.
I know I can get the Slot's value that is sent in with the intent:
String slotValue = incomingIntentRequest.getIntent().getSlot("LIST_OF_SHAPES").getValue();
I can even enumerate ALL the incoming Slots (and with it their values):
Map<String, Slot> slotMap = IncomingIntentRequest.getIntent().getSlots();
for(Map.Entry<String, Slot> entry : slotMap.entrySet())
{
String key = entry.getKey();
Slot slot = (Slot)entry.getValue();
String slotName = slot.getName();
String slotValue = slot.getValue();
//do something nifty with the current slot info....
}
What I would really like is something like:
String myAppId = "amzn1.echo-sdk-ams.app.<TheRestOfMyID>";
List<String> posibleSlotValues = SomeMagicAlexaAPI.getAllSlotValues(myAppId, "LIST_OF_SHAPES");
With this information I wouldn't have to maintain two separate "Lists" or "Enumerations"; One within the interaction Model and another one within my Request Handler. Seems like this should be a thing right?

No, the API does not allow you to do this.
However, since your interaction model is intimately tied with your development, I would suggest you check in the model with your source code in your source control system. If you are going to do that, you might as well put it with your source. Depending on your language, that also means you can probably read it during run-time.
Using this technique, you can gain access to your interaction model at run-time. Instead of doing it automatically through an API, you do it by best practice.
You can see several examples of this in action for Java in TsaTsaTzu's examples.

No - there is nothing in the API that allows you to do that.
You can see the full extent of the Request Body structure Alexa gives you to work with. It is very simple and available here:
https://developer.amazon.com/public/solutions/alexa/alexa-skills-kit/docs/alexa-skills-kit-interface-reference#Request%20Format
Please note, the Request Body is not to be confused with the request, which is a structure in the request body, with two siblings: version and session.

Programatically embed a video in a slideshow using Apache Open Office API

I want to create a plugin that adds a video on the current slide in an open instance of Open Office Impress by specifying the location of the video automatically. I have successfully added shapes to the slide. But I cannot find a way to embed a video.
Using the .uno:InsertAVMedia I can take user input to choose a file and it works. How do I want to specify the location of the file programmatically?
CONCLUSION:
This is not supported by the API. Images and audio can be inserted without user intervention but videos cannot be done this way. Hope this feature is released in subsequent versions.

You requested information about an extension, even though the code you are using is quite different, using a file stream reader and POI.
If you really do want to develop an extension, then start with one of the Java samples. An example that uses Impress is https://wiki.openoffice.org/wiki/File:SDraw.zip.
Inserting videos into an Impress presentation can be difficult. First be sure you can get it to work manually. The most obvious way to do that seems to be Insert -> Media -> Audio or Video. However many people use links to files instead of actually embedding the file. See also https://ask.libreoffice.org/en/question/1898/how-to-embed-video-into-impress-presentation/.
If embedding is working for your needs and you want to automate the embedding by using an extension (which seems to be what your question is asking), then there is a dispatcher method called InsertAVMedia that does this.
I do not know offhand what the parameters are for the call. See https://forum.openoffice.org/en/forum/viewtopic.php?f=20&t=61127 for how to look up parameters for dispatcher calls.
EDIT
Here is some Basic code that inserts a video.
sub insert_video
dim document as object
dim dispatcher as object
document = ThisComponent.CurrentController.Frame
dispatcher = createUnoService("com.sun.star.frame.DispatchHelper")
dispatcher.executeDispatch(document, ".uno:InsertAVMedia", "", 0, Array())
end sub
From looking at InsertAVMedia in sfx.sdi, it seems that this call does not take any parameters.
EDIT 2
Sorry but InsertVideo and InsertImage do not take parameters either. From svx.sdi it looks like the following calls take parameters of some sort: InsertGalleryPic, InsertGraphic, InsertObject, InsertPlugin, AVMediaToolBox.
However according to https://wiki.openoffice.org/wiki/Documentation/OOoAuthors_User_Manual/Getting_Started/Sometimes_the_macro_recorder_fails, it is not possible to specify a file for InsertObject. That documentation also mentions that you never know what will work until you try it.
InsertGraphic takes a FileName parameter, so I would think that should work.

It is possible to add an XPlayer on the current slide. It looks like this will allow you to play a video, and you can specify the file's URL automatically.
Here is an example using createPlayer: https://forum.openoffice.org/en/forum/viewtopic.php?f=20&t=57699.
EDIT:
This Basic code works on my system. To play the video, simply call the routine.
sub play_video
If Video_flag = 0 Then
video =converttoURL( _
"C:\Users\JimStandard\Downloads\H264_test1_Talkinghead_avi_480x360.avi")
Video_flag = 1
'for windows:
oManager = CreateUnoService("com.sun.star.media.Manager_DirectX")
' for Linux
' oManager = CreateUnoService("com.sun.star.media.Manager_GStreamer")
oPlayer = oManager.createPlayer( video )
' oPlayer.CreatePlayerwindow(array()) ' crashes?
'oPlayer.setRate(1.1)
oPlayer.setPlaybackLoop(False)
oPlayer.setMediaTime(0.0)
oPlayer.setVolumeDB(GetSoundVolume())
oPlayer.start() ' Lecture
Player_flag = 1
Else
oPlayer.start() ' Lecture
Player_flag = 1
End If
End Sub

I am coding in Android Studio, and I need to fetch and display a specific line of data from a specific webpage

I am very new to coding in Java/Android Studio. I have everything setup that I have been able to figure out thus far. I have a button, and I need to put code inside of the button click event that will fetch information from a website, convert it to a string and display it. I figured I would have to use the html source code in order to do this, so I have installed Jsoup html parser. All of the help with Jsoup I have found only leads me up to getting the HTML into a "Document". And I am not sure if that is the best way to accomplish what I need. Can anyone tell me what code to use to fetch the html code from the website, and then do a search through the html looking for a specific match, and convert that match to a string. Or can anyone tell me if there is a better way to do this. I only need to grab one piece of information and display it.
Here is the piece of html code that contains the value I want:
writeBidRow('Wheat',-60,false,false,false,0.5,'01/15/2015','02/26/2015','All',' ',' ',60,'even','c=2246&l=3519&d=G15',quotes['KEH15'], 0-0);
I need to grab and display whatever value represents the quotes['KEH15'], in that html code.
Thank you in advance for your help.
Keith

Grabbing raw HTML is an extremely tedious way to access information from the web, bad practice, and difficult to maintain in the case that wherever you are fetching the info from changes their HTML.
I don't know your specific situation and what the data is that you are fetching, but if there is another way for you to fetch that data via an API, use that instead.
Since you say you are pretty new to Android and Java, let me explain something I wish had been explained to me very early on (although I am mostly self taught).
The way people access information across the Internet is traditionally through HTML and JavaScript (which is interpreted by your browser like Chrome or Firefox to look pretty), which are transferred over the internet using the protocol called HTTP. This is a great way for humans to communicate with computers that are far away, and the average person probably doesn't realize that there is more to the internet than this--your browser and the websites you can go to.
Although there are multiple methods, for the purpose of what I think you're looking for, applications communicate over the internet a slightly different way:
When an android application asks a server for some information, rather than returning HTML and JavaScript which is intended for human consumption, the server will (traditionally) return what's called JSON (or sometimes XML, which is very similar). JSON is a very simple way to get information about an object, and put it into a form that is readable easily by both humans (developers) and computers, and can be transmitted over the internet easily. For example, let's say you ask a server for some kind of "Video" object for an app that plays video, it may give you something like this:
{
"name": "Gangnam Style",
"metadata": {
"url": "https://www.youtube.com/watch?v=9bZkp7q19f0",
"views": 2000000000,
"ageRestricted": false,
"likes": 43434
"dislikes":124
},
"comments": [
{
"username": "John",
"comment": "10/10 would watch again"
},
{
"username": "Jane",
"number": "12/10 with rice"
}
]
}
That is very readable by us humans, but also by computers! We know the name is "Gangnam Style", the link of the video, etc.
A super helpful way to interact with JSON in Java and Android is Google's GSON library, which lets you cast a Java object as JSON or parse a JSON object to a Java object.
To get this information in the first place, you have to make a network call to an API, Application Programming Interface. Just a fancy term for communication between a server and a client. One very cool, free, and easy to understand API that I will use for this example is the OMDB API, which just spits back information about movies from IMDB. So how do you talk to the API? Well luckily they've got some nice documentation, which says that to get information on a movie we need to use some parameters in the url, like perhaps
http://www.omdbapi.com/?t=Interstellar
They want a title with the parameter "t". We could put a year, or return type, but this should be good to understand the basics. If you go to that URL in your browser, it spits back lots of information about Interstellar in JSON form. That stuff we were talking about! So how would you get this information from your Android application?
Well, you could use Android's built in HttpUrlConnection classes and research for a few hours on why your calls aren't working. But doesn't essentially every app now use networking? Why reinvent the wheel when virtually every valuable app out there has probably done this work before? Perhaps we can find some code online to do this work for us.
Or even better, a library! In particular, an open source library developed by Square, retrofit. There are multiple libraries like it (go ahead and research that out, it's best to find the best fit for your project), but the idea is they do all the hard work for you like low level network programming. Following their guides, you can reduce a lot of code work into just a few lines. So for our OMDB API example, we can set up our network calls like this:
//OMDB API
public ApiClient{
//an instance of this client object
private static OmdbApiInterface sOmdbApiInterface;
//if the omdbApiInterface object has been instantiated, return it, but if not, build it then return it.
public static OmdbApiInterface getOmdbApiClient() {
if (sOmdbApiInterface == null) {
RestAdapter restAdapter = new RestAdapter.Builder()
.setEndpoint("http://www.omdbapi.com")
.build();
sOmdbApiInterface = restAdapter.create(OmdbApiInterface.class);
}
return sOmdbApiInterface;
}
public interface OmdbApiInterface {
#GET("/")
void getInfo(#Query("t") String title, Callback<JsonObject> callback);
}
}
After you have researched and understand what's going on up there using their documentation, we can now use this class that we have set up anywhere in your application to call the API:
//you could get a user input string and pass it in as movieName
ApiClient.getOmdbApiClient().getInfo(movieName, new Callback<List<MovieInfo>>() {
//the nice thing here is that RetroFit deals with the JSON for you, so you can just get information right here from the JSON object
#Override
public void success(JsonObject movies, Response response) {
Log.i("TAG","Movie name is " + movies.getString("Title");
}
#Override
public void failure(RetrofitError error) {
Log.e("TAG", error.getMessage());
}
});
Now you've made an API call to get info from across the web! Congratulations! Now do what you want with the data. In this case we used Omdb but you can use anything that has this method of communication. For your purposes, I don't know exactly what data you are trying to get, but if it's possible, try to find a public API or something where you can get it using a method similar to this.
Let me know if you've got any questions.
Cheers!

As #caleb-allen said, if an API is available to you, it's better to use that.
However, I'm assuming that the web page is all you have to work with.
There are many libraries that can be used on Android to get the content of a URL.
Choices range from using the bare-bones HTTPUrlConnection to slightly higher-level HTTPClient to using robust libraries like Retrofit. I personally recommend Retrofit. Whatever you do, make sure that your HTTP access is asynchronous, and not done on the UI thread. Retrofit will handle this for you by default.
For parsing the results, I've had good results in the past using the open-source HTMLCleaner library - see http://htmlcleaner.sourceforge.net
Similar to JSoup, it takes a possibly-badly-formed HTML document and creates a valid XML document from it.
Once you have a valid XML document, you can use HTMLCleaner's implementation of the XML DOM to parse the document to find what you need.
Here, for example, is a method that I use to parse the names of 'projects' from a <table> element on a web page where projects are links within the table:
private List<Project> parseProjects(String html) throws Exception {
List<Project> parsedProjects = new ArrayList<Project>();
HtmlCleaner pageParser = new HtmlCleaner();
TagNode node = pageParser.clean(html);
String xpath = "//table[#class='listtable']".toString();
Object[] tables = node.evaluateXPath(xpath);
TagNode tableNode;
if(tables.length > 1) {
tableNode = (TagNode) tables[0];
} else {
throw new Exception("projects table not found in html");
}
TagNode[] projectLinks = tableNode.getElementsByName("a", true);
for(int i = 0; i < projectLinks.length; i++) {
TagNode link = projectLinks[i];
String projectName = link.getText().toString();
String href = link.getAttributeByName("href");
String projectIdString = href.split("=")[1];
int projectId = Integer.parseInt(projectIdString);
Project project = new Project(projectId, projectName);
parsedProjects.add(project);
}
return parsedProjects;
}

If you have permission to edit the webpage to add hyper link to specified line of that page you can use this way
First add code for head of line that you want to go there in your page
head your text if wanna
Then in your apk app on control click code enter
This.mwebview.loadurl("https:#######.com.html#target")
in left side of # enter your address of webpage and then #target in this example that your id is target.
Excuse me if my english lang. isn't good

Handling non-fatal errors in Java

I've written a program to aid the user in configuring 'mechs for a game. I'm dealing with loading the user's saved data. This data can (and some times does) become partially corrupt (either due to bugs on my side or due to changes in the game data/rules from upstream).
I need to be able to handle this corruption and load as much as possible. To be more specific, the contents of the save file are syntactically correct but semantically corrupt. I can safely parse the file and drop whatever entries that are not semantically OK.
Currently my data parser will just show a modal dialog with an appropriate warning message. However displaying the warning is not the job of the parser and I'm looking for a way of passing this information to the caller.
Some code to show approximately what is going on (in reality there is a bit more going on than this, but this highlights the problem):
class Parser{
public void parse(XMLNode aNode){
...
if(corrupted) {
JOptionPane.showMessageDialog(null, "Corrupted data found",
"error!", JOptionPane.WARNING_MESSAGE);
// Keep calm and carry on
}
}
}
class UserData{
static UserData loadFromFile(File aFile){
UserData data = new UserData();
Parser parser = new Parser();
XMLDoc doc = fromXml(aFile);
for(XMLNode entry : doc.allEntries()){
data.append(parser.parse(entry));
}
return data;
}
}
The thing here is that bar an IOException or a syntax error in the XML, loadFromFile will always succeed in loading something and this is the wanted behavior. Somehow I just need to pass the information of what (if anything) went wrong to the caller. I could return a Pair<UserData,String> but this doesn't look very pretty. Throwing an exception will not work in this case obviously.
Does any one have any ideas on how to solve this?

Depending on what you are trying to represent, you can use a class, like SQLWarning from the java.sql package. When you have a java.sql.Statement and call executeQuery you get a java.sql.ResultSet and you can then call getWarnings on the result set directly, or even on the statement itself.
You can use an enum, like RefUpdate.Result, from the JGit project. When you have a org.eclipse.jgit.api.Git you can create a FetchCommand, which will provide you with a FetchResult, which will provide you with a collection of TrackingRefUpdates, which will each contain a RefUpdate.Result enum, which can be one of:
FAST_FORWARD
FORCED
IO_FAILURE
LOCK_FAILURE
NEW
NO_CHANGE
NOT_ATTEMPTED
REJECTED
REJECTED_CURRENT_BRANCH
RENAMED
In your case, you could even use a boolean flag:
class UserData {
public boolean isCorrupt();
}
But since you mentioned there is a bit more than that going on in reality, it really depends on your model of "corrupt". However, you will probably have more options if you have a UserDataReader that you can instantiate, instead of a static utility method.

How to set Record Selection Formula on Crystal Reports java

How do you create/set Record Selection Formula programatically on crystal reports using java? I tried searching on the internet but the only option is through IFilter which requires a Crystal Report Server. My program only uses the JRC library. Also this is a java desktop application using swing.

It may be a bit late, but maybe this is useful for someone:
reportClientDoc.getDataDefController().getRecordFilterController().setFormulaText("your record selection formula here");

I was doing some research about this and noticed that there are 3 methods with which you can do this:
Using the IFilter interface as shown in this example provided by SAP
// Set the filter string to be used as the Record Filter
String freeEditingFilter = "{Customer.Country} = 'Canada'";
// Retrieve the record filter for the Data Definition Controller
IFilter iFilter = clientDoc.getDataDefController().getDataDefinition().getRecordFilter();
// Set the filter to free editing text filter string
iFilter.setFreeEditingText(freeEditingFilter);
// Modify the filter through the Record Filter Controller to the report
clientDoc.getDataDefController().getRecordFilterController().modify(iFilter);
I am using the JRC only without a Crystal Report Server and the above example worked for me.
As Francisco said in his answer, using the setFormulaText method:
clientDoc.getDataDefController().getRecordFilterController().setFormulaText("{Customer.Country} = 'Canada'");
Using parameters. Parameters can be passed to the report using code (you can use the addDiscreteParameterValue function in the helper class) or else they can be filled in by the user during runtime. I chose not to opt for this option because they can not be set to optional

If you want to create a crystal report of your program, you need another jar file of software.
You can create your program in NetBeans IDE and link your IDE with IReport software which is used in NetBeans for creating Reporting in java.
You get many example from internet about this.