"Young GC becomes inefficient if we have tenured objects referring to younger generations" is quoted as one of the reasons to favor immutable objects.
What exactly happens when the collector comes across such an object in the old generation?
Why should it be any more cumbersome than collecting an older object referring to an object in the young generation?
To collect the Eden space (of the young gen.) any live objects are copied from the Eden space to one of the survivor spaces. Objects already in a survivor space are copied from the 'from' space to the 'to' space unless they are old enough to be promoted to the old generation (in which case they are copied there).
All of this involves object relocation. To do this safely any objects in the old generation that point to objects in the new generation (that are being relocated during a minor GC) must have those references updated. The more objects that have references to objects being relocated, the more work the GC has to do during a minor GC.
If you use only immutable objects the number of objects that will contain pointers from the old gen. to the young gen. will be very small (most likely zero). There are only two ways this could happen:
An object is promoted to the old gen. whilst an object it refers to
is still in a survivor space.
An object is large enough to be allocated directly in the old gen. and refers to an object in the young gen.
To summarise the answer, by using immutable objects you're reducing the possible number of object references that the GC has to update during a minor collection, therefore improving its efficiency.
What exactly happens when the collector comes across such an object in the old generation?How does it handle it?
Typical it can't, before the collector considers collecting objects in the older generation it promotes anything it could not reap in the younger generation so by the time the collectors considers if the parent object can be collected they are no longer in the younger generation. I think they issue is what happens when it comes across the object in the younger generation, it has to skip it, and could skip it hundreds or thousands of times as it does the younger generation GCs before it has to do one on the older generation.
Why should it be any more cumbersome than collecting a younger object referring to an object in the tenured generation?
Being referenced by an older generation object means it is effectively frozen in the young generation, being referenced by a younger generation object is no issue as the younger generations are all resolved before it starts collecting from the older generation.
I think as long as you are disciplined about de-referencing all your unused objects then it will not hurt your GC efficiency but that can be a lot of extra work in a big application.
Related
While performing GC, the JVM go over the live objects, and sweep unmarked objects.
According to:
How to Tune Java Garbage Collection
"The execution time of Full GC is relatively longer than that of Minor GC"
Will this always be the case ?
If we have ~100 objects in the Old Generation space, and the average number of live objects (created and sweep objected) in the eden space is more than 100, it that still true ?
In addition , suppose we perform compact phase , then a rule of thumb says for better performance copy a small number of large size objects than copy large number of small size objects.
So what am I missing here ?
"The execution time of Full GC is relatively longer than that of Minor
GC"
Yes.
When garbage collection happens memory is divided into generations, i.e. separate pools holding objects of different ages. Almost all most used configurations uses two generations, one for young objects (Young Generation) and one for old objects (Old Generation)
Different algorithms can be used to perform garbage collection in the different generations, each algorithm optimized based on commonly observed characteristics for that particular generation.
Generational garbage collection exploits the following observations, known as the weak generational hypothesis, regarding applications written in several programming languages, including the Java programming language:
Most allocated objects are not referenced (considered live) for long, that is, they die young.
Few references from older to younger objects exist.
Young generation collections occur relatively frequently and are efficient and fast because the young generation space is usually small and likely to contain a lot of objects that are no longer referenced.
Objects that survive some number of young generation collections are eventually promoted, or tenured, to the old generation.
This generation is typically larger than the young generation and its occupancy
grows more slowly. As a result, old generation collections are infrequent, but take significantly longer to complete.
The garbage collection algorithm chosen for a young generation typically puts a premium on speed, since young generation collections are frequent.
On the other hand, the old generation is typically managed by an algorithm
that is more space efficient, because the old generation takes up most of the heap and old generation algorithms have to work well with low garbage densities.
Read this white paper for a better understanding. The above content is referenced from there.
I am learning how garbage collection works.
I am clear with Young generation, but not with Old generation
When old generation is full and major GC is performed then what happens?
Does all objects either live or dead are removed from Old generation or only objects which are dead are removed?
If all objects in old generation are live at the time of major GC then what happens? Does it throws OutOfMemoryError?
Young generation: Most of the newly created objects are located here. Since most objects soon become unreachable, many objects are created in the young generation, then disappear. When objects disappear from this area, we say a "minor GC" has occurred.
Old generation: The objects that did not become unreachable and survived from the young generation are copied here. It is generally larger than the young generation. As it is bigger in size, the GC occurs less frequently than in the young generation. When objects disappear from the old generation, we say a "major GC" (or a "full GC") has occurred.
OldGen : This pool is basically contain tenured and virtual (reserved) space and will be holding those objects which survived after garbage collection from YoungGen space.
If old generation becomes full, OOM will be thrown.
Q & A
When old generation is full and major gc is performed then what happens? Objects are removed from memory.
Does all objects either live or dead are removed from old generation or only objects which are dead are removed? only dead objects are removed, objects which are still referenced still live in old
If all objects in old generation are live then what happens?
Does it throws OutOfMemoryError? OOM will be thrown
Only those objects which are not reachable are removed by GC.
So yes, if all objects in old generation heap are reachable, JVM will throw OutOfMemoeryError.
Old generation: The objects that did not become unreachable and survived from the young generation are copied here. It is generally larger than the young generation. As it is bigger in size, the GC occurs less frequently than in the young generation. When objects disappear from the old generation, we say a "major GC" (or a "full GC") has occurred.
you may look here for more details.
I've read few articles about how garbage collection works and still don't understand how using generations helps? As I understood the main idea is that we start collection from the youngest generation and move to older generations. But why the authors of this idea decided that starting from the youngest generation is the most efficient way?
The older the generation, means object has been used quite a many times, and possibly will need again.
Removing recently created object makes no sense, May be its temporary(scope : local) object.
The authors start with the youngest generation first simply because that's what gets filled up first after your application starts, however in reality which generation is being swept and when is non-deterministic as your application runs.
The important points with generational GC are:
the young generation uses a copying collector which is copying objects to a space that it considers to be empty (the unused survivor spaces) from eden and the current survivor space and is therefore fast and the GC pause is minimal.
add to this fact that most objects die young and therefore the pause required to copy a small number of surviving objects from the eden and the current surviver space is small as only objects with live references are copied, after which eden and the previous survivor space can be wiped.
after being copied several times objects are copied to the tenured (old) generation; Eventually the tenured generation will fill up, however, this time there's not a clean space to copy the objects to, so the garbage collector has to sweap and compact within the generation, which is slow (when compared to the copy performed in eden and the survivor space) meaning a longer pause.
the good news, based on the most objects die young heuristic is, major GCs happen much less frequently than minor keeping GC pauses to a minimum over the lifetime of an application.
there's also a benefit that all new objects are allocated on the top of the heap, meaning there's mininal instructions required to do so, with defragmentation occurring naturally as part of the copy process.
Both these pages, Oracle Garbage Collection Tuning and Useful JVM Flags – Part 5 (Young Generation Garbage Collection), describe this.
Read this one.
Using different generations, makes the allocation of objects easy and fast as MOST of the allocations are done in a single region of Heap - Eden. Based on the observation that most objects die young from Weak Generational Hypothesis, collections in Young generation have more garbage which will reclaim more memory and its relatively small compared to the heap which means that time taken to scan the objects is also less. Thats why Young generation GCs are fast.
For more details on GC and generations, you can refer to this
As I understand, a generational GC divides objects into generations.
And on each cycle, GC runs on only one generation.
Why? Why Garbage Collecting of only one generation is enough?
P.S: I understand all these from here .
If you read the link I provided in earlier question you had about Generational GC, you will understand why it does so, the cycle is when the white set memory is filled up.
To optimize for this scenario, memory
is managed in generations, or memory
pools holding objects of different
ages. Garbage collection occurs in
each generation when the generation
fills up. Objects are allocated in a
generation for younger objects or the
young generation, and because of
infant mortality most objects die
there. When the young generation fills
up it causes a minor collection. Minor
collections can be optimized assuming
a high infant mortality rate. The
costs of such collections are, to the
first order, proportional to the
number of live objects being
collected. A young generation full of
dead objects is collected very
quickly. Some surviving objects are
moved to a tenured generation. When
the tenured generation needs to be
collected there is a major collection
that is often much slower because it
involves all live objects.
Basically, each objects is divided into generations (based on the hypothesis about the object) and places them into a memory heap for a particular generation. When that memory heap is filled up, the GC cycle begins, and those objects that still references are moved to another memory heap and fresh objects are added.
It's not always enough -- it's just that it's usually enough, so it saves time by not examining objects that are likely to stay alive anyway.
Every object has a generation, saying how many garbage collections it has survived. If an object has survived a few garbage collections, chances are that it will also survive the next one.
MSDN has a great explanation:
A generational garbage collector makes the following assumptions:
The newer an object is, the shorter its lifetime will be.
The older an object is, the longer its lifetime will be.
Newer objects tend to have strong relationships to each other and are frequently accessed around the same time.
Compacting a portion of the heap is faster than compacting the whole heap.
Because of this, you could save some time by only trying to collect younger objects, and collecting the older generations only if that doesn't free up enough memory.
The answer is there really.
It has been empirically observed that in many programs, the most recently created objects are also those most likely to become unreachable quickly (known as infant mortality or the generational hypothesis).
And
Generational garbage collection is a heuristic approach, and some unreachable objects may not be reclaimed on each cycle. It may therefore occasionally be necessary to perform a full mark and sweep or copying garbage collection to reclaim all available space.
Basically, generational collection gives you better performance over a full garbage collection at the cost of completeness. That's why a mixture of the two is used in practice.
I understand that time taken by YGC is proportional to number of live objects in Eden. I also understand that how the live objects are figured out in Major collections (All the objects in thread stacks and static objects and further objects reachable from those objects transitively.)
But I dont understand how the live objects are figured out in young generation collection ?
if it parses the thread stacks, then it need to parse eden + tenured space which is not the case I think. So how does JVM find the live objects in eden and copies them in To Survivor space ?
how the live objects are figured out in young generation collection ?
A good high-level description of how generational collection is implemented in HotSpot may be found in this article.
In general a generational collector marks the young generation as follows (assuming we just have two generations):
It marks young objects and traces references starting with the thread stack frames and the static frames. When it finds a reference to an old generation object it ignores it.
Then it repeats the process for references in the old generation that refer to young generation objects. The tricky bit is identifying these references in the old generation without marking the entire old generation.
Now we have marked all of the objects in the new generation that are reachable ... and the rest (in that generation) can be reclaimed.
In HotSpot, old generation objects that contain young generation references are identified using the "Card Table". The old generation is divided into regions of 512 bytes, and each region has a "Card". If the region contains any old -> new generation pointers, a bit in the Card is set. Objects in regions with the Card bit set are then traced during a new generation collection.
The tricky thing is maintaining the Card table as new space references are written to old generation objects. In HotSpot, this is implemented using a software write-barrier that sets the appropriate Card's dirty bit whenever a new space reference is written into the memory region corresponding to the Card. As the linked article notes, this makes setting a reference field in an object more expensive, but it is apparently worth it due to the time saved by being able to collect only the new generation most of the time.
To trace just the youngest generation, the garbage collector scans the same root set (stacks and registers) and ALSO all the older (non-collected) generations that have been modified since the previous young generation scan. Only those objects that have been modified can possibly point at young generation objects, as unmodified objects cannot possibly point at objects that were created after their last modification.
So the tricky part is, how does the GC know which objects have been modified since the last GC? There are a number of techniques that can be used, but they basically come down to keeping track of writes to old generation objects. This can be done by trapping writes (write barriers) or just keeping track of all write targets (write buffers, card marking), all of which add overhead to the execution of the program while the GC is not running (so it doesn't show up as GC pause time, but does show up in the total elapsed time). Hardware support helps a lot, if its available. The tracking need not be exact, as long as every modified older generation object is scanned (scanning unmodified objects is a waste of time, but won't hurt anything).
I am quoting the relevant text from the article by Brian Goetz here.
Tracing garbage collectors, such as
copying, mark-sweep, and mark-compact,
all start scanning from the root set,
traversing references between objects,
until all live objects have been
visited. A generational tracing
collector starts from the root set,
but does not traverse references that
lead to objects in the older
generation, which reduces the size of
the object graph to be traced.