Develop Reference

Neo4j database recovery failed due to OutOfMemoryError but utilization is well under max heapsize [duplicate]

I am writing a client-side Swing application (graphical font designer) on Java 5. Recently, I am running into java.lang.OutOfMemoryError: Java heap space error because I am not being conservative on memory usage. The user can open unlimited number of files, and the program keeps the opened objects in the memory. After a quick research I found Ergonomics in the 5.0 Java Virtual Machine and others saying on Windows machine the JVM defaults max heap size as 64MB.
Given this situation, how should I deal with this constraint?
I could increase the max heap size using command line option to java, but that would require figuring out available RAM and writing some launching program or script. Besides, increasing to some finite max does not ultimately get rid of the issue.
I could rewrite some of my code to persist objects to file system frequently (using database is the same thing) to free up the memory. It could work, but it's probably a lot work too.
If you could point me to details of above ideas or some alternatives like automatic virtual memory, extending heap size dynamically, that will be great.

Ultimately you always have a finite max of heap to use no matter what platform you are running on. In Windows 32 bit this is around 2GB (not specifically heap but total amount of memory per process). It just happens that Java chooses to make the default smaller (presumably so that the programmer can't create programs that have runaway memory allocation without running into this problem and having to examine exactly what they are doing).
So this given there are several approaches you could take to either determine what amount of memory you need or to reduce the amount of memory you are using. One common mistake with garbage collected languages such as Java or C# is to keep around references to objects that you no longer are using, or allocating many objects when you could reuse them instead. As long as objects have a reference to them they will continue to use heap space as the garbage collector will not delete them.
In this case you can use a Java memory profiler to determine what methods in your program are allocating large number of objects and then determine if there is a way to make sure they are no longer referenced, or to not allocate them in the first place. One option which I have used in the past is "JMP" http://www.khelekore.org/jmp/.
If you determine that you are allocating these objects for a reason and you need to keep around references (depending on what you are doing this might be the case), you will just need to increase the max heap size when you start the program. However, once you do the memory profiling and understand how your objects are getting allocated you should have a better idea about how much memory you need.
In general if you can't guarantee that your program will run in some finite amount of memory (perhaps depending on input size) you will always run into this problem. Only after exhausting all of this will you need to look into caching objects out to disk etc. At this point you should have a very good reason to say "I need Xgb of memory" for something and you can't work around it by improving your algorithms or memory allocation patterns. Generally this will only usually be the case for algorithms operating on large datasets (like a database or some scientific analysis program) and then techniques like caching and memory mapped IO become useful.

Run Java with the command-line option -Xmx, which sets the maximum size of the heap.
See here for details.

You could specify per project how much heap space your project wants
Following is for Eclipse Helios/Juno/Kepler:
Right mouse click on
Run As - Run Configuration - Arguments - Vm Arguments,
then add this
-Xmx2048m

Increasing the heap size is not a "fix" it is a "plaster", 100% temporary. It will crash again in somewhere else. To avoid these issues, write high performance code.
Use local variables wherever possible.
Make sure you select the correct object (EX: Selection between String, StringBuffer and StringBuilder)
Use a good code system for your program(EX: Using static variables VS non static variables)
Other stuff which could work on your code.
Try to move with multy THREADING

Big caveat ---- at my office, we were finding that (on some windows machines) we could not allocate more than 512m for Java heap. This turned out to be due to the Kaspersky anti-virus product installed on some of those machines. After uninstalling that AV product, we found we could allocate at least 1.6gb, i.e, -Xmx1600m (m is mandatory other wise it will lead to another error "Too small initial heap") works.
No idea if this happens with other AV products but presumably this is happening because the AV program is reserving a small block of memory in every address space, thereby preventing a single really large allocation.

I would like to add recommendations from oracle trouble shooting article.
Exception in thread thread_name: java.lang.OutOfMemoryError: Java heap space
The detail message Java heap space indicates object could not be allocated in the Java heap. This error does not necessarily imply a memory leak
Possible causes:
Simple configuration issue, where the specified heap size is insufficient for the application.
Application is unintentionally holding references to objects, and this prevents the objects from being garbage collected.
Excessive use of finalizers.
One other potential source of this error arises with applications that make excessive use of finalizers. If a class has a finalize method, then objects of that type do not have their space reclaimed at garbage collection time
After garbage collection, the objects are queued for finalization, which occurs at a later time. finalizers are executed by a daemon thread that services the finalization queue. If the finalizer thread cannot keep up with the finalization queue, then the Java heap could fill up and this type of OutOfMemoryError exception would be thrown.
One scenario that can cause this situation is when an application creates high-priority threads that cause the finalization queue to increase at a rate that is faster than the rate at which the finalizer thread is servicing that queue.

VM arguments worked for me in eclipse. If you are using eclipse version 3.4, do the following
go to Run --> Run Configurations --> then select the project under maven build --> then select the tab "JRE" --> then enter -Xmx1024m.
Alternatively you could do Run --> Run Configurations --> select the "JRE" tab --> then enter -Xmx1024m
This should increase the memory heap for all the builds/projects. The above memory size is 1 GB. You can optimize the way you want.

Yes, with -Xmx you can configure more memory for your JVM.
To be sure that you don't leak or waste memory. Take a heap dump and use the Eclipse Memory Analyzer to analyze your memory consumption.

Follow below steps:
Open catalina.sh from tomcat/bin.
Change JAVA_OPTS to
JAVA_OPTS="-Djava.awt.headless=true -Dfile.encoding=UTF-8 -server -Xms1536m
-Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=256m
-XX:MaxPermSize=256m -XX:+DisableExplicitGC"
Restart your tomcat

By default for development JVM uses small size and small config for other performance related features. But for production you can tune e.g. (In addition it Application Server specific config can exist) -> (If there still isn't enough memory to satisfy the request and the heap has already reached the maximum size, an OutOfMemoryError will occur)
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
-XX:ParallelGCThreads=8
-XX:+CMSClassUnloadingEnabled
-XX:InitiatingHeapOccupancyPercent=70
-XX:+UnlockDiagnosticVMOptions
-XX:+UseConcMarkSweepGC
-Xms512m
-Xmx8192m
-XX:MaxPermSize=256m (in java 8 optional)
For example: On linux Platform for production mode preferable settings.
After downloading and configuring server with this way http://www.ehowstuff.com/how-to-install-and-setup-apache-tomcat-8-on-centos-7-1-rhel-7/
1.create setenv.sh file on folder /opt/tomcat/bin/
touch /opt/tomcat/bin/setenv.sh
2.Open and write this params for setting preferable mode.
nano /opt/tomcat/bin/setenv.sh
export CATALINA_OPTS="$CATALINA_OPTS -XX:ParallelGCThreads=8"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+CMSClassUnloadingEnabled"
export CATALINA_OPTS="$CATALINA_OPTS -XX:InitiatingHeapOccupancyPercent=70"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+UnlockDiagnosticVMOptions"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+UseConcMarkSweepGC"
export CATALINA_OPTS="$CATALINA_OPTS -Xms512m"
export CATALINA_OPTS="$CATALINA_OPTS -Xmx8192m"
export CATALINA_OPTS="$CATALINA_OPTS -XX:MaxMetaspaceSize=256M"
3.service tomcat restart
Note that the JVM uses more memory than just the heap. For example
Java methods, thread stacks and native handles are allocated in memory
separate from the heap, as well as JVM internal data structures.

I read somewhere else that you can try - catch java.lang.OutOfMemoryError and on the catch block, you can free all resources that you know might use a lot of memory, close connections and so forth, then do a System.gc() then re-try whatever you were going to do.
Another way is this although, i don't know whether this would work, but I am currently testing whether it will work on my application.
The Idea is to do Garbage collection by calling System.gc() which is known to increase free memory. You can keep checking this after a memory gobbling code executes.
//Mimimum acceptable free memory you think your app needs
long minRunningMemory = (1024*1024);
Runtime runtime = Runtime.getRuntime();
if(runtime.freeMemory()<minRunningMemory)
System.gc();

Easy way to solve OutOfMemoryError in java is to increase the maximum heap size by using JVM options -Xmx512M, this will immediately solve your OutOfMemoryError. This is my preferred solution when I get OutOfMemoryError in Eclipse, Maven or ANT while building project because based upon size of project you can easily ran out of Memory.
Here is an example of increasing maximum heap size of JVM, Also its better to keep -Xmx to -Xms ration either 1:1 or 1:1.5 if you are setting heap size in your java application.
export JVM_ARGS="-Xms1024m -Xmx1024m"
Reference Link

If you came here to search this issue from REACT NATIVE.
Then i guess you should do this
cd android/ && ./gradlew clean && cd ..

Add this line to your gradle.properties file
org.gradle.jvmargs=-Xmx2048m -XX:MaxPermSize=512m -XX:+HeapDumpOnOutOfMemoryError -Dfile.encoding=UTF-8
It should work. You can change MaxPermSize accordingly to fix your heap problem

I have faced same problem from java heap size.
I have two solutions if you are using java 5(1.5).
just install jdk1.6 and go to the preferences of eclipse and set the jre path of jav1 1.6 as you have installed.
Check your VM argument and let it be whatever it is.
just add one line below of all the arguments present in VM arguments as
-Xms512m -Xmx512m -XX:MaxPermSize=...m(192m).
I think it will work...

If you need to monitor your memory usage at runtime, the java.lang.management package offers MBeans that can be used to monitor the memory pools in your VM (eg, eden space, tenured generation etc), and also garbage collection behaviour.
The free heap space reported by these MBeans will vary greatly depending on GC behaviour, particularly if your application generates a lot of objects which are later GC-ed. One possible approach is to monitor the free heap space after each full-GC, which you may be able to use to make a decision on freeing up memory by persisting objects.
Ultimately, your best bet is to limit your memory retention as far as possible whilst performance remains acceptable. As a previous comment noted, memory is always limited, but your app should have a strategy for dealing with memory exhaustion.

In android studio add/change this line at the end of gradle.properties (Global Properties):
...
org.gradle.jvmargs=-XX\:MaxHeapSize\=1024m -Xmx1024m
if it doesn't work you can retry with bigger than 1024 heap size.

add the below code inside android/gradle.properties:
org.gradle.jvmargs=-Xmx4096m -XX:MaxPermSize=4096m -XX:+HeapDumpOnOutOfMemoryError
org.gradle.daemon=true
org.gradle.parallel=true
org.gradle.configureondemand=true

Note that if you need this in a deployment situation, consider using Java WebStart (with an "ondisk" version, not the network one - possible in Java 6u10 and later) as it allows you to specify the various arguments to the JVM in a cross platform way.
Otherwise you will need an operating system specific launcher which sets the arguments you need.

In my case it solved by assigning more memory to Shared build process heap size in intellij settings.
Go to intellij settings > Compiler > Shared build process heap size

Regarding to netbeans, you could set max heap size to solve the problem.
Go to 'Run', then --> 'Set Project Configuration' --> 'Customise' --> 'run' of its popped up window --> 'VM Option' --> fill in '-Xms2048m -Xmx2048m'.

If you are using Android Studio just add these lines with gradle.properties file
org.gradle.jvmargs=-Xmx2048m -XX:MaxPermSize=512m -XX:+HeapDumpOnOutOfMemoryError -Dfile.encoding=UTF-8

Android Studio
File -> Invalidate Caches and Restart solved it for me :)

If this issue is happening in Wildfly 8 and JDK1.8,then we need to specify MaxMetaSpace settings instead of PermGen settings.
For example we need to add below configuration in setenv.sh file of wildfly.
JAVA_OPTS="$JAVA_OPTS -XX:MaxMetaspaceSize=256M"
For more information, please check Wildfly Heap Issue

If you keep on allocating & keeping references to object, you will fill up any amount of memory you have.
One option is to do a transparent file close & open when they switch tabs (you only keep a pointer to the file, and when the user switches tab, you close & clean all the objects... it'll make the file change slower... but...), and maybe keep only 3 or 4 files on memory.
Other thing you should do is, when the user opens a file, load it, and intercept any OutOfMemoryError, then (as it is not possible to open the file) close that file, clean its objects and warn the user that he should close unused files.
Your idea of dynamically extending virtual memory doesn't solve the issue, for the machine is limited on resources, so you should be carefull & handle memory issues (or at least, be carefull with them).
A couple of hints i've seen with memory leaks is:
--> Keep on mind that if you put something into a collection and afterwards forget about it, you still have a strong reference to it, so nullify the collection, clean it or do something with it... if not you will find a memory leak difficult to find.
--> Maybe, using collections with weak references (weakhashmap...) can help with memory issues, but you must be carefull with it, for you might find that the object you look for has been collected.
--> Another idea i've found is to develope a persistent collection that stored on database objects least used and transparently loaded. This would probably be the best approach...

Java OOM Heap space issue can also arise when your DB connection pool got full.
I faced this issue because of my Hikari Connection pool (when upgraded to Spring boot 2.4.*) was full and not able to provide connections anymore (all active connections are still pending to fetch results from database).
Issue is some of our native queries in JPA Repositories contain ORDER BY ?#{#pageable} which takes a very long time to get results when upgraded.
Removed ORDER BY ?#{#pageable} from all the native queries in JPA repositories and OOM heap space issue along with connection pool issue got resolved.

If this error occurs right after execution of your junit tests, then you should execute Build -> Rebuild Project.

If this error comes up during APK generation in react-native, cd into the android folder in your project and do:
./gradlew clean
then
./gradlew assembleRelease
If error persists, then, restart your machine.

In Intellij, it worked for me just by giving the "Build Project"

If everything else fails, in addition to increasing the max heap size try also increasing the swap size. For Linux, as of now, relevant instructions can be found in https://linuxize.com/post/create-a-linux-swap-file/.
This can help if you're e.g. compiling something big in an embedded platform.

How resolve an OutOfMemory Error by the better way

I am programming a Java application allowing to minimize any boolean expression using QuineMcCluskey methodology. When I compile my code, I have an OutOfMemory Error with the message "Java heap space"!
If I understand, the exception may have several origins:
The memory space allocated to the JVM heap is insufficient to create the objects required by the application.
A memory leak prevents the garbage collector from releasing objects that are yet unused but still have references. Thus these objects are never released and occupy more and more space in the pile until occupying all the available space.
...
I know that use a profiling tool may be necessary to analyze the contents of the memory of the JVM and determine the origin of the memory consumption. But how use thoses tools ? Have I to modify xmx and xms data ? What could be the consequences if I change them ?
(I know also that it is necessary to optimize my code).
What are the different debugging steps ?
Furthermore, this application has to be use by lot of users (so by diferent computers...)
As you can see, I have lot of questions about this problem (I am a novice lol)... That's why I create this post.. I would like to resolve this problem by the better way and also, learn good reflexes.
Thank you!

Increasing of the memory is NOT the solution, unless you have unlimited resources!
If that happens in production or any machine other than your own, you can force the JVM which runs your service to generate a dump file which you can then download and analyse by adding VM flag -XX:+HeapDumpOnOutOfMemoryError to your jvm.conf file.
That is pretty useful when the machine that runs the app becomes unresponsive so no JMX connections could be made in order to run Oracle's JMC (or similar) monitoring tools. If you are for some reason able to get to the VM you can run the flight recording and try to analyse which method is causing the OOM.
Check here how to use flight recording.
And check this for heap dump analysis preview

It is possible to increase heap size allocated by the JVM by using command line options Here we have 3 options
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
java -Xms16m -Xmx64m ClassName
It is also possible to increase heap size allocated by the JVM in eclipse directly In eclipse IDE goto
Run---->Run Configurations---->Arguments
And set VM arguments

Java Threads: Program lags (Not Responding) just halfway done of the process in background [duplicate]

I am writing a client-side Swing application (graphical font designer) on Java 5. Recently, I am running into java.lang.OutOfMemoryError: Java heap space error because I am not being conservative on memory usage. The user can open unlimited number of files, and the program keeps the opened objects in the memory. After a quick research I found Ergonomics in the 5.0 Java Virtual Machine and others saying on Windows machine the JVM defaults max heap size as 64MB.
Given this situation, how should I deal with this constraint?
I could increase the max heap size using command line option to java, but that would require figuring out available RAM and writing some launching program or script. Besides, increasing to some finite max does not ultimately get rid of the issue.
I could rewrite some of my code to persist objects to file system frequently (using database is the same thing) to free up the memory. It could work, but it's probably a lot work too.
If you could point me to details of above ideas or some alternatives like automatic virtual memory, extending heap size dynamically, that will be great.

Ultimately you always have a finite max of heap to use no matter what platform you are running on. In Windows 32 bit this is around 2GB (not specifically heap but total amount of memory per process). It just happens that Java chooses to make the default smaller (presumably so that the programmer can't create programs that have runaway memory allocation without running into this problem and having to examine exactly what they are doing).
So this given there are several approaches you could take to either determine what amount of memory you need or to reduce the amount of memory you are using. One common mistake with garbage collected languages such as Java or C# is to keep around references to objects that you no longer are using, or allocating many objects when you could reuse them instead. As long as objects have a reference to them they will continue to use heap space as the garbage collector will not delete them.
In this case you can use a Java memory profiler to determine what methods in your program are allocating large number of objects and then determine if there is a way to make sure they are no longer referenced, or to not allocate them in the first place. One option which I have used in the past is "JMP" http://www.khelekore.org/jmp/.
If you determine that you are allocating these objects for a reason and you need to keep around references (depending on what you are doing this might be the case), you will just need to increase the max heap size when you start the program. However, once you do the memory profiling and understand how your objects are getting allocated you should have a better idea about how much memory you need.
In general if you can't guarantee that your program will run in some finite amount of memory (perhaps depending on input size) you will always run into this problem. Only after exhausting all of this will you need to look into caching objects out to disk etc. At this point you should have a very good reason to say "I need Xgb of memory" for something and you can't work around it by improving your algorithms or memory allocation patterns. Generally this will only usually be the case for algorithms operating on large datasets (like a database or some scientific analysis program) and then techniques like caching and memory mapped IO become useful.

Run Java with the command-line option -Xmx, which sets the maximum size of the heap.
See here for details.

You could specify per project how much heap space your project wants
Following is for Eclipse Helios/Juno/Kepler:
Right mouse click on
Run As - Run Configuration - Arguments - Vm Arguments,
then add this
-Xmx2048m

Increasing the heap size is not a "fix" it is a "plaster", 100% temporary. It will crash again in somewhere else. To avoid these issues, write high performance code.
Use local variables wherever possible.
Make sure you select the correct object (EX: Selection between String, StringBuffer and StringBuilder)
Use a good code system for your program(EX: Using static variables VS non static variables)
Other stuff which could work on your code.
Try to move with multy THREADING

Big caveat ---- at my office, we were finding that (on some windows machines) we could not allocate more than 512m for Java heap. This turned out to be due to the Kaspersky anti-virus product installed on some of those machines. After uninstalling that AV product, we found we could allocate at least 1.6gb, i.e, -Xmx1600m (m is mandatory other wise it will lead to another error "Too small initial heap") works.
No idea if this happens with other AV products but presumably this is happening because the AV program is reserving a small block of memory in every address space, thereby preventing a single really large allocation.

I would like to add recommendations from oracle trouble shooting article.
Exception in thread thread_name: java.lang.OutOfMemoryError: Java heap space
The detail message Java heap space indicates object could not be allocated in the Java heap. This error does not necessarily imply a memory leak
Possible causes:
Simple configuration issue, where the specified heap size is insufficient for the application.
Application is unintentionally holding references to objects, and this prevents the objects from being garbage collected.
Excessive use of finalizers.
One other potential source of this error arises with applications that make excessive use of finalizers. If a class has a finalize method, then objects of that type do not have their space reclaimed at garbage collection time
After garbage collection, the objects are queued for finalization, which occurs at a later time. finalizers are executed by a daemon thread that services the finalization queue. If the finalizer thread cannot keep up with the finalization queue, then the Java heap could fill up and this type of OutOfMemoryError exception would be thrown.
One scenario that can cause this situation is when an application creates high-priority threads that cause the finalization queue to increase at a rate that is faster than the rate at which the finalizer thread is servicing that queue.

VM arguments worked for me in eclipse. If you are using eclipse version 3.4, do the following
go to Run --> Run Configurations --> then select the project under maven build --> then select the tab "JRE" --> then enter -Xmx1024m.
Alternatively you could do Run --> Run Configurations --> select the "JRE" tab --> then enter -Xmx1024m
This should increase the memory heap for all the builds/projects. The above memory size is 1 GB. You can optimize the way you want.

Yes, with -Xmx you can configure more memory for your JVM.
To be sure that you don't leak or waste memory. Take a heap dump and use the Eclipse Memory Analyzer to analyze your memory consumption.

Follow below steps:
Open catalina.sh from tomcat/bin.
Change JAVA_OPTS to
JAVA_OPTS="-Djava.awt.headless=true -Dfile.encoding=UTF-8 -server -Xms1536m
-Xmx1536m -XX:NewSize=256m -XX:MaxNewSize=256m -XX:PermSize=256m
-XX:MaxPermSize=256m -XX:+DisableExplicitGC"
Restart your tomcat

By default for development JVM uses small size and small config for other performance related features. But for production you can tune e.g. (In addition it Application Server specific config can exist) -> (If there still isn't enough memory to satisfy the request and the heap has already reached the maximum size, an OutOfMemoryError will occur)
-Xms<size> set initial Java heap size
-Xmx<size> set maximum Java heap size
-Xss<size> set java thread stack size
-XX:ParallelGCThreads=8
-XX:+CMSClassUnloadingEnabled
-XX:InitiatingHeapOccupancyPercent=70
-XX:+UnlockDiagnosticVMOptions
-XX:+UseConcMarkSweepGC
-Xms512m
-Xmx8192m
-XX:MaxPermSize=256m (in java 8 optional)
For example: On linux Platform for production mode preferable settings.
After downloading and configuring server with this way http://www.ehowstuff.com/how-to-install-and-setup-apache-tomcat-8-on-centos-7-1-rhel-7/
1.create setenv.sh file on folder /opt/tomcat/bin/
touch /opt/tomcat/bin/setenv.sh
2.Open and write this params for setting preferable mode.
nano /opt/tomcat/bin/setenv.sh
export CATALINA_OPTS="$CATALINA_OPTS -XX:ParallelGCThreads=8"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+CMSClassUnloadingEnabled"
export CATALINA_OPTS="$CATALINA_OPTS -XX:InitiatingHeapOccupancyPercent=70"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+UnlockDiagnosticVMOptions"
export CATALINA_OPTS="$CATALINA_OPTS -XX:+UseConcMarkSweepGC"
export CATALINA_OPTS="$CATALINA_OPTS -Xms512m"
export CATALINA_OPTS="$CATALINA_OPTS -Xmx8192m"
export CATALINA_OPTS="$CATALINA_OPTS -XX:MaxMetaspaceSize=256M"
3.service tomcat restart
Note that the JVM uses more memory than just the heap. For example
Java methods, thread stacks and native handles are allocated in memory
separate from the heap, as well as JVM internal data structures.

I read somewhere else that you can try - catch java.lang.OutOfMemoryError and on the catch block, you can free all resources that you know might use a lot of memory, close connections and so forth, then do a System.gc() then re-try whatever you were going to do.
Another way is this although, i don't know whether this would work, but I am currently testing whether it will work on my application.
The Idea is to do Garbage collection by calling System.gc() which is known to increase free memory. You can keep checking this after a memory gobbling code executes.
//Mimimum acceptable free memory you think your app needs
long minRunningMemory = (1024*1024);
Runtime runtime = Runtime.getRuntime();
if(runtime.freeMemory()<minRunningMemory)
System.gc();

Easy way to solve OutOfMemoryError in java is to increase the maximum heap size by using JVM options -Xmx512M, this will immediately solve your OutOfMemoryError. This is my preferred solution when I get OutOfMemoryError in Eclipse, Maven or ANT while building project because based upon size of project you can easily ran out of Memory.
Here is an example of increasing maximum heap size of JVM, Also its better to keep -Xmx to -Xms ration either 1:1 or 1:1.5 if you are setting heap size in your java application.
export JVM_ARGS="-Xms1024m -Xmx1024m"
Reference Link

If you came here to search this issue from REACT NATIVE.
Then i guess you should do this
cd android/ && ./gradlew clean && cd ..

Add this line to your gradle.properties file
org.gradle.jvmargs=-Xmx2048m -XX:MaxPermSize=512m -XX:+HeapDumpOnOutOfMemoryError -Dfile.encoding=UTF-8
It should work. You can change MaxPermSize accordingly to fix your heap problem

I have faced same problem from java heap size.
I have two solutions if you are using java 5(1.5).
just install jdk1.6 and go to the preferences of eclipse and set the jre path of jav1 1.6 as you have installed.
Check your VM argument and let it be whatever it is.
just add one line below of all the arguments present in VM arguments as
-Xms512m -Xmx512m -XX:MaxPermSize=...m(192m).
I think it will work...

If you need to monitor your memory usage at runtime, the java.lang.management package offers MBeans that can be used to monitor the memory pools in your VM (eg, eden space, tenured generation etc), and also garbage collection behaviour.
The free heap space reported by these MBeans will vary greatly depending on GC behaviour, particularly if your application generates a lot of objects which are later GC-ed. One possible approach is to monitor the free heap space after each full-GC, which you may be able to use to make a decision on freeing up memory by persisting objects.
Ultimately, your best bet is to limit your memory retention as far as possible whilst performance remains acceptable. As a previous comment noted, memory is always limited, but your app should have a strategy for dealing with memory exhaustion.

In android studio add/change this line at the end of gradle.properties (Global Properties):
...
org.gradle.jvmargs=-XX\:MaxHeapSize\=1024m -Xmx1024m
if it doesn't work you can retry with bigger than 1024 heap size.

add the below code inside android/gradle.properties:
org.gradle.jvmargs=-Xmx4096m -XX:MaxPermSize=4096m -XX:+HeapDumpOnOutOfMemoryError
org.gradle.daemon=true
org.gradle.parallel=true
org.gradle.configureondemand=true

Note that if you need this in a deployment situation, consider using Java WebStart (with an "ondisk" version, not the network one - possible in Java 6u10 and later) as it allows you to specify the various arguments to the JVM in a cross platform way.
Otherwise you will need an operating system specific launcher which sets the arguments you need.

In my case it solved by assigning more memory to Shared build process heap size in intellij settings.
Go to intellij settings > Compiler > Shared build process heap size

Regarding to netbeans, you could set max heap size to solve the problem.
Go to 'Run', then --> 'Set Project Configuration' --> 'Customise' --> 'run' of its popped up window --> 'VM Option' --> fill in '-Xms2048m -Xmx2048m'.

If you are using Android Studio just add these lines with gradle.properties file
org.gradle.jvmargs=-Xmx2048m -XX:MaxPermSize=512m -XX:+HeapDumpOnOutOfMemoryError -Dfile.encoding=UTF-8

Android Studio
File -> Invalidate Caches and Restart solved it for me :)

If this issue is happening in Wildfly 8 and JDK1.8,then we need to specify MaxMetaSpace settings instead of PermGen settings.
For example we need to add below configuration in setenv.sh file of wildfly.
JAVA_OPTS="$JAVA_OPTS -XX:MaxMetaspaceSize=256M"
For more information, please check Wildfly Heap Issue

If you keep on allocating & keeping references to object, you will fill up any amount of memory you have.
One option is to do a transparent file close & open when they switch tabs (you only keep a pointer to the file, and when the user switches tab, you close & clean all the objects... it'll make the file change slower... but...), and maybe keep only 3 or 4 files on memory.
Other thing you should do is, when the user opens a file, load it, and intercept any OutOfMemoryError, then (as it is not possible to open the file) close that file, clean its objects and warn the user that he should close unused files.
Your idea of dynamically extending virtual memory doesn't solve the issue, for the machine is limited on resources, so you should be carefull & handle memory issues (or at least, be carefull with them).
A couple of hints i've seen with memory leaks is:
--> Keep on mind that if you put something into a collection and afterwards forget about it, you still have a strong reference to it, so nullify the collection, clean it or do something with it... if not you will find a memory leak difficult to find.
--> Maybe, using collections with weak references (weakhashmap...) can help with memory issues, but you must be carefull with it, for you might find that the object you look for has been collected.
--> Another idea i've found is to develope a persistent collection that stored on database objects least used and transparently loaded. This would probably be the best approach...

Java OOM Heap space issue can also arise when your DB connection pool got full.
I faced this issue because of my Hikari Connection pool (when upgraded to Spring boot 2.4.*) was full and not able to provide connections anymore (all active connections are still pending to fetch results from database).
Issue is some of our native queries in JPA Repositories contain ORDER BY ?#{#pageable} which takes a very long time to get results when upgraded.
Removed ORDER BY ?#{#pageable} from all the native queries in JPA repositories and OOM heap space issue along with connection pool issue got resolved.

If this error occurs right after execution of your junit tests, then you should execute Build -> Rebuild Project.

If this error comes up during APK generation in react-native, cd into the android folder in your project and do:
./gradlew clean
then
./gradlew assembleRelease
If error persists, then, restart your machine.

In Intellij, it worked for me just by giving the "Build Project"

If everything else fails, in addition to increasing the max heap size try also increasing the swap size. For Linux, as of now, relevant instructions can be found in https://linuxize.com/post/create-a-linux-swap-file/.
This can help if you're e.g. compiling something big in an embedded platform.

Setting VM Options in JAR (-Xmx) [JVM Startup Parameters]

I searched for this question and got many many matches on stackoverflow itself, but the answers in there are sort of contradicting.
In Ques: How to add VM options to jar? the top-voted+accepted says it is not possible and also most of the answers in Ques: Can I set Java max heap size for running from a jar file? say that No, it is not possible. Most of these answers saying "not possible" were given by people with high reputation and therefore I assume they cannot all be just wrong by coincidence.
One guy said that it can be done by using this others said to make a installer for it, or use Launch4J or make batch files or make another JAR and run the main through this but most of these did not get many votes as compared to those saying "no".
So is it really possible or not? My problem is that I run out of heap space and therefore I want to increase it in JAR.
Q1. I have set increased Heap space from netbeans, will it be increased in the JAR too? (I think no, I am just confirming this one)
Q2. What should I do now to make the increased heap space in JAR? (I am looking for an easy to do way because I do not have knowledge about batch scripting and all and also that I am already putting an Installer to place these files(Advanced Installer) so I do not want to put additional Installers to do this) Is there a simple way out?

A1. When running your application from Netbeans you spawn a JVM process which executes the application. Setting the heap size from Netbeans simply means it will launch the JVM with the max heap size you configured. It will not effect the jar you are creating in any way.
A2. You cannot configure the heap size inside your jar. This cannot be done either programmatically or by some Manifest configuration.
Setting the max heap can only be done by passing the right JVM options when launching the JVM and this can be done by either having some kind of a startup script or by using a Java launcher as mentioned in the many answers on stackoverflow.
The option of a startup script is better in my opinion as it allows the end user to control the memory setting if needed. With a launcher the memory settings are usually hardcoded and cannot be changed.
I suggest you should take a look at the many startup scripts that are available for various open source Java products. Another option would be searching for "java startup script" or similar.

Q1. I have set increased Heap space from netbeans, will it be increased in the JAR too?
The memroy use in JVM can be explain blow:
init
represents the initial amount of memory (in bytes) that
the Java virtual machine requests from the operating system
for memory management during startup. The Java virtual machine
may request additional memory from the operating system and
may also release memory to the system over time.
The value of init may be undefined.
used
represents the amount of memory currently used (in bytes).
committed
represents the amount of memory (in bytes) that is
guaranteed to be available for use by the Java virtual machine.
The amount of committed memory may change over time (increase
or decrease). The Java virtual machine may release memory to
the system and committed could be less than init.
committed will always be greater than
or equal to used.
max
represents the maximum amount of memory (in bytes)
that can be used for memory management. Its value may be undefined.
The maximum amount of memory may change over time if defined.
The amount of used and committed memory will always be less than
or equal to max if max is defined.
A memory allocation may fail if it attempts to increase the
used memory such that used > committed even
if used <= max would still be true (for example,
when the system is low on virtual memory).
Q2. What should I do now to make the increased heap space in JAR?
May be you can do this by some tricks, like wrap you jar in another jar.
Copy you jar in another_project/resources/ and package another_project to a jar.
The code blow is just a sample, maybe can not run or compile.
public static void main(String[] args) {
String jarFile = this.getClass().getResource("/resources/you.jar").getFile();
Runtime.getRuntime().exec("java -Xmx256m -jar "+jarFile);
}

Eclipse not releasing memory in Java process on Linux

My Linux server need to be able to handle 30+ eclipse instances for developers. I did a quick test of running 10 eclipse instances. The Java process associated with each eclipse initially around 200MB RSS memory, increased up to around 550MB, when more projects are loaded.
But Java process doesn't seem to release memory, after closing/deleting all projects within eclipse instances. I still see it uses over 550MB RSS.
How can I change Eclipse or Java settings so that memory foot print got reduced when developers closed down projects or being idle for a while?
Thanks

You may want to experiment with these (and other) JVM tuning options to make the JVM less reluctant to return memory to the OS:
-XX:MaxHeapFreeRatio Maximum percentage of heap free after GC to avoid shrinking. Default is 70.
-XX:MinHeapFreeRatio Minimum percentage of heap free after GC to avoid expansion. Default is 40.
However, I suspect that you won't see the eclipse process shrink to anywhere near its initial size, since eclipse is a huge, complex application that probably lazy-loads (but does not unload, once used) a lot of classes and associated data structures.

I've never seen Java release memory.
I don't think you will get any value out of trying to get it to release memory with Eclipse, I've watched that little memory counter for YEARS and never once see the allocated memory drop.
You might try one of these.
After each session, exit the JVM and restart.
Set your -Xmx lower.
Separate your instances into categories with high -Xmx and low -Xmx and let the user determine which one he wants.
As a side-thought, if it really mattered to you, you MIGHT be able to run multiple eclipse instances under one VM. It would probably be WAY too much work (man-weeks to man-years), but if you could get it right you could reduce overhead by like 150-200mb/instance. The disadvantage would be that a VM crash (Pretty rare these days) would kill everyone.
Testing this theory would be a matter of calling eclipse's main from within an existing JVM and trying to get it to display somewhere useful. The rest of the man-year is spent trying to figure out where they used evil static variables or singletons and changing them to something else.

Switch the Java to use the G1 garbage collector with the HeapFreeRatio parameters. Use these options in eclipse.ini:
-XX:+UnlockExperimentalVMOptions
-XX:+UseG1GC
-XX:MinHeapFreeRatio=5
-XX:MaxHeapFreeRatio=25
Now when Eclipse eats up more than 1 GB of RAM for a complicated operation and switched back to 300 MB after Garbage Collection the memory will be released back to the operating system.

I would suggest checking on garbage collection, setting right options or even forcing GC periodically might increase time till eclipse memory usage grows high.
Following link might be useful http://www.eclipsezone.com/eclipse/forums/t93757.html