Develop Reference

Mockito, MissingMethodInvocationException when run all tests in class

Here is my test class.
#ExtendWith(MockitoExtension.class)
class DishServiceTest {
static MockedStatic<DaoFactory> daoFactoryDummy;
static MockedStatic<FileUtil> fileUtilDummy;
#Mock
DaoFactory daoFactory;
#Mock
DishDao dishDao;
#Spy
DishService dishService;
#BeforeAll
static void setUp() {
fileUtilDummy = Mockito.mockStatic(FileUtil.class);
daoFactoryDummy = Mockito.mockStatic(DaoFactory.class);
}
#AfterAll
static void close() {
daoFactoryDummy.close();
fileUtilDummy.close();
}
#Test
void deleteWithImage_id0_success() {
daoFactoryDummy.when(ServiceManager::getInstance).thenReturn(daoFactory);
when(daoFactory.createDishDao()).thenReturn(dishDao);
long id = 2;
String deleteDir = "/dish-image/2";
dishService.deleteWithImage(id, deleteDir);
verify(dishDao, times(1)).delete(id);
fileUtilDummy.verify(() -> FileUtil.deleteDishFolder(deleteDir));
}
#Test
void update_idSet_success() {
daoFactoryDummy.when(ServiceManager::getInstance).thenReturn(daoFactory);
when(daoFactory.createDishDao()).thenReturn(dishDao);
Dish dish = new Dish(2, "testName",
"testDescription", Category.DRINKS, BigDecimal.TEN, "/image21");
dishService.saveOrUpdate(dish);
verify(dishDao, times(1)).update(dish);
verify(dishDao, times(1)).close();
}
}
I mock static methods like this because DishService class gets dao object from DaoFactory.
Here is an example of DishService method
public class DishService {
public void saveOrUpdate(Dish newDish) {
try (DishDao dishDao = DaoFactory.getInstance().createDishDao()) {
long newDishId = newDish.getId();
if (newDishId == 0) {
dishDao.save(newDish);
} else {
dishDao.update(newDish);
}
}
}
}
And of DaoFactory
public class JDBCDaoFactory extends DaoFactory {
DBManager dbManager = DBManager.getInstance();
UserDaoMapper userDaoMapper = new UserDaoMapper();
DishDaoMapper dishDaoMapper = new DishDaoMapper();
OrderDaoMapper orderDaoMapper = new OrderDaoMapper();
OrderItemDaoMapper orderItemDaoMapper = new OrderItemDaoMapper();
#Override
public UserDao createUserDao() {
return new JDBCUserDao(dbManager.getConnection(),
userDaoMapper);
}
#Override
public DishDao createDishDao() {
return new JDBCDishDao(dbManager.getConnection(), dishDaoMapper);
}
#Override
public OrderDao createOrderDao() {
return new JDBCOrderDao(dbManager.getConnection(), orderDaoMapper,
orderItemDaoMapper);
}
}
And here is the exception I have
org.mockito.exceptions.misusing.MissingMethodInvocationException:
Also, this error might show up because:
you stub either of: final/private/equals()/hashCode() methods. Those methods cannot be stubbed/verified. Mocking methods
declared on non-public parent classes is not supported.
inside when() you don't call method on mock but on some other object. at
service.DishServiceTest.update_idSet_success(DishServiceTest.java:61)
Here is the line 61
The strangest thing here is that tests pass when I run them seperately, but if i press run all tests in class I get the exception above.

How to unit test logic in an inner class using Mockito / Powermockito

I have the following class to test.
public class ClassToTest {
private View view;
public ClassToTest(View view) {
this.view = view;
}
public void init() {
view.add(new ParamClass.OnSomething() {
#Override
public void onSomethingElse() {
view.doSomeWork();
}
});
}
}
Where view is
public class View {
public void add(OnSomething onSomething) {
}
public void doSomeWork() {
}
}
I have mocked view object, but no clue how to test the logic marked "Some logic here to test"
ParamClass is final.
public final class ParamClass {
public interface onSomething {
public void onSomethingElse();
}
}
Without making change to source, is there a way to unit test this using Mockito / Powermockito?
I'm trying to verify the invocation of doSomeWork()
#RunWith(PowerMockRunner.class)
#PrepareForTest({ ClassToTest.class })
public class TestClass {
#Mock View view;
#Before
public void init() {
MockitoAnnotations.initMocks(this);
}
#Test
public void test() throws Exception {
ClassToTest classToTest = new ClassToTest(view);
PowerMockito.doCallRealMethod().when(view).add(Mockito.any(ParamClass.OnSomething.class));
PowerMockito.whenNew(ParamClass.OnSomething.class)
.withAnyArguments()
.thenReturn(new ParamClass.OnSomething() {
#Override
public void onSomethingElse() {
view.doSomeWork();
}
});
classToTest.init();
Mockito.verify(view, Mockito.times(1)).doSomeWork();
}
}
Its throwing exception
java.lang.ArrayIndexOutOfBoundsException: 0
at org.powermock.api.mockito.internal.expectation.DefaultConstructorExpectationSetup.withAnyArguments(DefaultConstructorExpectationSetup.java:66)
at com.linkedin.android.lite.animations.TestClass.test(TestClass.java:29)

I figured out how to do it. Updating the answer.
public class TestClass {
#Mock View view;
#Before
public void init() {
MockitoAnnotations.initMocks(this);
}
#Test
public void test() throws Exception {
ClassToTest classToTest = new ClassToTest(view);
classToTest.init();
ArgumentCaptor<ParamClass.OnSomething> captor =
ArgumentCaptor.forClass(ParamClass.OnSomething.class);
verify(view).add(captor.capture());
ParamClass.OnSomething onSomething = captor.getValue();
onSomething.onSomethingElse();
Mockito.verify(view, Mockito.times(1)).doSomeWork();
}
}

Well what are you exactly trying to test? If there is code inside onSomethingElse that calls other objects/methods then you can simply mock all those other calls and then use Mockito.verify(mockObjectHere).methodCalled() on those methods that were called, if you just want to implement testing for behaviour.

Spy an already initialized Java object Mockito

I am using the Mocktio library to write some test cases, since I have an elaborate inhertance structure, I have a few objects which are instantiated in the parent class, and I would like to mock one of its function call. Does Mockito library provide any way to spy on a already initialized object?
Also, the object is not directly instantiable.
Similar to the following -
public class A {
protected static MyObject a;
public static void someMethod() {
a = myObjectBuilder.createObj();
}
}
And another class B looks something similar to
class B extends A {
#BeforeClass
public static void setUpBeforeClass() {
someMethod();
}
#Test
public void mockTest() {
// now mock behavior of some method of MyObject a
// Missing line to spy object a.
Mockito.doReturn(false).when(a).xyz();
/* Now call some method that triggers a.xyz()
again, it is not a direct call,
there are multiple layer of abstraction
*/
}
}
Edit: I have tried the following and it does not work
MyObject mock_object = Mockito.spy(a);
Mockito.doReturn(false).when(mock_object).xyz();

Basically, don't do initialisation in BeforeClass, it runs only once but
you need to have new spy in each test, or you must "reinitialise" spy object
before each test.
Please examine this code:
import org.junit.Before;
import org.junit.BeforeClass;
import org.junit.Test;
import org.mockito.Mockito;
import static org.assertj.core.api.Assertions.assertThat;
class MyObject{
public String cos;
public MyObject(String cos) {
this.cos = cos;
}
public boolean xyz() {
return true;
}
}
class A {
protected static MyObject a;
public void someMethod() {
a = new MyObject("cccc");
}
}
public class B extends A {
#Before
public void setUpBeforeTest() {
someMethod();
}
#Test
public void mockTest() {
MyObject mock_object = Mockito.spy(a);
Mockito.doReturn(false).when(mock_object).xyz();
assertThat(mock_object.xyz()).isFalse();
}
#Test
public void mockTest2() {
MyObject mock_object = Mockito.spy(a);
Mockito.doReturn(true).when(mock_object).xyz();
assertThat(mock_object.xyz()).isTrue();
}
}
If you want it your way, please change:
public void someMethod() {
a = myObjectBuilder.createObj();
}
into:
public static void someMethod() {
a = myObjectBuilder.createObj();
}
You can't call non static method from static initialiser #BeforeClass:
class A {
protected static MyObject a;
public static void someMethod() {
a = new MyObject("cccc");
}
}
public class B extends A {
#BeforeClass
public static void setUpBeforeClass() {
someMethod();
}
#Test
public void mockTest() {
MyObject mock_object = Mockito.spy(a);
Mockito.doReturn(false).when(mock_object).xyz();
assertThat(mock_object.xyz()).isFalse();
}
#Test
public void mockTest2() {
MyObject mock_object = Mockito.spy(a);
// Here we replace original object with our spy
A.a = mock_object;
Mockito.doReturn(false).when(mock_object).xyz();
assertThat(a.xyz()).isFalse();
}
}
Another example (in this case we replace object a with mock (spy is not needed):
class MyObject{
public String cos;
public MyObject(String cos) {
this.cos = cos;
}
public boolean xyz() {
return true;
}
}
class A {
protected MyObject a;
public A() {
a = new MyObject("ggggg");
}
public String doSomethingWithA(){
if(a.xyz()){
return a.cos;
}
else{
return "aaaa";
}
}
}
#RunWith(MockitoJUnitRunner.class)
public class B {
#Mock
MyObject mock_object;
#InjectMocks
A systemUnderTest = new A();
#Test
public void mockTest1() {
Mockito.doReturn(false).when(mock_object).xyz();
assertThat(systemUnderTest.doSomethingWithA()).isEqualTo("aaaa");
}
#Test
public void mockTest2() {
Mockito.doReturn(true).when(mock_object).xyz();
assertThat(systemUnderTest.doSomethingWithA()).isNull();
}
}

Unable to mock while implementing builder pattern

I'm having hard time to test a class(TestClass) which uses builder pattern(BuilderClass) in logic . I'm unable to mock builder class(BuilderClass). The following is simplified version of my logic.
public class TestClass {
public int methodA() {
ExternalDependency e = BuilerClass.builder().withName("xyz").withNumber(10).build();
return e.callExternalFunction();
}
}
And here is my builder class
public class BuilderClass {
public static BuilderClass builder() { return new BuilderClass(); }
int number;
String name;
public BuilderClass withName(String name) {
this.name = name;
return this;
}
public BuilderClass withNumber(int number) {
this.number = number;
return this;
}
public ExternalDependency build() {
return new ExternalDependency(name,number);
}
}
For my test class, I'm using Mockito with Dataprovider.
#RunWith(DataProviderRunner.class)
class TestClassTest {
#Mock private ExternalDependency e;
#Mock private BuilderClass b;
#InjectMocks private TestClass t;
#Before public void setUp() { MockitoAnnotations.initMocks(this); }
#Test public void testMethodA() {
when(b.withName(any(String.class)).thenReturn(b); //This is not mocking
when(b.withNumber(10)).thenReturn(b); //This is not mocking
Assert.notNull(this.t.methodA()); //Control while execution is going to implementation of withName and withNumber, which should not happen right.
}
Help me if I miss anything. Thanks
}

Similar to what kryger said in a comment above, you probably need to do a refactor like this:
In your class under test, create a seam to replace e by a mock:
public class TestClass {
public int methodA() {
ExternalDependency e = buildExternalDependency("xyz", 10);
return e.callExternalFunction();
}
protected ExternalDependency buildExternalDependency(String name, int number) {
return BuilerClass.builder().withName(name).withNumber(number).build();
}
}
In the test code, override the test class to replace e with a mock and to validate the inputs to the builder:
#RunWith(DataProviderRunner.class)
class TestClassTest {
#Mock private ExternalDependency e;
private TestClass t;
#Before public void setUp() {
MockitoAnnotations.initMocks(this);
t = new TestClass() {
#Override
protected ExternalDependency buildExternalDependency(String name, int number) {
// validate inputs:
Assert.assertEquals(10, number);
Assert.assertEquals("xyz", name);
return e; // provide the mock
}
}
}
#Test public void testMethodA() {
// TODO: mock behavior of callExternalFunction() here
Assert.notNull(this.t.methodA());
}
}
You may want to go further with the refactor to move buildExternalDependency() into a another class which could be mocked and injected in the constructor of TestClass.

Running two same tests with different arguments

I have a test with 15-20 different test cases, I want to run the same test with twice with two different parameters which are supposed to be passed to the test's BeforeClass method, for instance:
public class TestOne {
private static ClassToTest classToTest;
#BeforeClass
public static void setUp() throws Exception {
classToTest = new ClassToTest("Argument1", "Argument2");
}
#Test
public void testOne() {
........roughly 15 - 20 tests here
}
public class TestTwo {
private static ClassToTest classToTest;
#BeforeClass
public static void setUp() throws Exception {
classToTest = new ClassToTest("Argument3", "Argument4");
}
#Test
public void testOne() {
........roughly 15 - 20 tests here, same as in TestOne
}
As you can see the only difference between these two tests is in the setup method, which passes different values to the constructor of the ClassToTest. I don't want to replicate the test methods in both classes, but would prefer either inheritance or some other intelligent way to achieve this in one class.

This seems like a perfect use case for JUnit4's #Parameters; see https://blogs.oracle.com/jacobc/entry/parameterized_unit_tests_with_junit or http://www.mkyong.com/unittest/junit-4-tutorial-6-parameterized-test/ . That said, you'll have to move the initialization from the setUp method to a constructor for the test class.

For what it's worth, here is how you would do it with TestNG:
public class TestFactory {
#Factory
public Object[] createTests() {
return new Object[] {
new ClassToTest("arg1", "arg2"),
new ClassToTest("arg3", "arg4")
};
}
}
public class ClassToTest {
public ClassToTest(String arg1, String arg2) {
this.arg1 = arg1;
this.arg2 = arg2;
}
#Test
public void testOne() {
// use arg1 and arg2
}
}

Thanks all for your quick replies. This is how I did it finally
public abstract class Base {
final HeavyObject heavy;
protected Base(HeavyObject heavy) {
this.param = param;
}
#Test
public void test() {
param.doSomething();
}
#Test
.............More tests here
}
public class FirstTest extends Base{
private static HeavyObject param;
#BeforeClass
public static void init() {
param = new HeavyObject("arg1", "arg2");
}
public FirstTest() {
super(param);
}
}
public class SecondTest extends Base{
private static HeavyObject param;
#BeforeClass
public static void init() {
param = new HeavyObject("arg3", "arg4");
}
public FirstTest() {
super(param);
}
}
Base is an abstract class which has all the tests and FirstTest and SecondTest create their own objects with different parameters and pass it to the abstract class to use it.

As per the documentation (http://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html):
A subclass does not inherit the private members of its parent class.
However, if the superclass has public or protected methods for
accessing its private fields, these can also be used by the subclass.

How about this:
public class TestOne {
private static ClassToTest classToTest1, classToTest2;
#BeforeClass
public static void setUp() throws Exception {
classToTest1 = new ClassToTest("Argument1", "Argument2");
classToTest2 = new ClassToTest("Argument3", "Argument4");
}
#Test
public void testOne() {
testOneImpl(classToTest1);
testOneImpl(classToTest2);
}
public void testOneImpl(ClassToTest classToTest) {
// exact samew as whatever your current testOne() test method is
}
....
}
EDIT:
Or to keep method count down:
public class TestOne {
private static List<ClassToTest> classesToTest;
#BeforeClass
public static void setUp() throws Exception {
classesToTest = new ArrayList<>;
classesToTest.add( new ClassToTest("Argument1", "Argument2"));
classesToTest.add( new ClassToTest("Argument3", "Argument4"));
}
#Test
public void testOne() {
for (ClassToTest classToTest: classesToTest) {
... same test content as before
}
}