So I'm trying to autowire an interface.
MyApp:
#SpringBootApplication(scanBasePackages={"com.B","com.C"})
public class MyApp {
...
}
MyController (which is in package com.B):
#RestController
#RequestMapping("/users")
public class UserController
{
#Autowired
MyInterface myInterface;
}
MyInterface (which is in package com.C):
#Service
public interface MyInterface
{
...
}
But I'm getting this error:
Consider defining a bean of type 'C.MyInterface' in your configuration.
even though I have:
The package included here: #SpringBootApplication(scanBasePackages={"com.B","com.C"})
#Service in the interface
Is it even possible to autowire an interface?
Yes you can inject an interface. But there should be at least one implementation that is declared as bean, so Spring manages it and will know what to inject. If you have more then one implementation you will need to specify which one you want. Read about annotation #Resource and about and it's property "name". A good article to read about it would be Wiring in Spring: #Autowired, #Resource and #Inject. Also, If you have many implementations of the same interface and want to inject them all you can do this:
#Autowired
private List<DataSource> dataSources;
If DataSource is an interface the list will contain all of its implementations. You can read about it here and here
In my Spring project I have an interface:
public interface MyIntefrace {
void myMethod(String myParam);
}
and I have a class that implements it:
#Component
#Profile("prod")
public class MyImplementationClass implements MyInterface {
...
In my other class, I'm using this object as follows:
#Autowired
MyInterface myinterface;
...
myinterface.myMethod(someParam);
And it throws me an error:
Field myinterface in mypackage required a bean of type ... that could not be found.
The injection point has the following annotations:
- #org.springframework.beans.factory.annotation.Autowired(required=true)
Consider defining a bean of type '...' in your configuration
I tried to add #Service annotation above MyInterface but that didn't help. What else can I do?
Make sure the prod profile is enable such as through :
JVM property :
-Dspring.profiles.active=prod
Or environment variable:
export spring_profiles_active=prod
Or programmatically when creating ApplicationContext:
AnnotationConfigApplicationContext ctx = new AnnotationConfigApplicationContext();
//...........
ctx.getEnvironment().setActiveProfiles("prod");
ctx.refresh();
The answer provided by #KenChan already mentioned a viable solution, but i wanted to add some additional details. Currently, you only have one implementation of MyIntefrace, which is also annotated with #Profile. If you don not run you application using this profile, all other beans that depend on that bean (and are not optionally injected using getter/setter injection) can not be created.
I recommend you either create a second implementation that will be injected if your profile is not activated, or annotate all depending beans as well with that profile.
#Component
#Profile("prod")
public class MyImplementationClass implements MyInterface {
// ...
}
#Component
#Profile("!prod") // second implementation, used if 'prod' is not active
public class MyImplementationClass implements MyInterface {
// ...
}
I am studying for the Spring Core certification and I have some doubts related to the answer of this question founded on the study material stuff.
Why are you not allowed to annotate a final class with #Configuration
My reasoning is the following one for substantiate this assertion:
Consider the following configuration class:
#Bean
public AccountRepository accountRepository() {
return new JdbcAccountRepository();
}
#Bean
public TransferService transferService() {
TransferServiceImpl service = new TransferServiceImpl();
service.setAccountRepository(accountRepository());
return service;
}
#Bean
public AccountService accountService() {
return new AccountServiceImpl(accountRepository());
}
At first look this situation could appear strange because the first method (accountRepository()) instantiates an JdbcAccountRepository object as a bean having id=AccountRepository that, following the Spring default behavior, is a singleton
The second and the third method call twice more time the accountRepository() method that should instantiate twice more JdbcAccountRepository objects and this is not possibile because it is singleton !!!
So, to solve this situation Spring use the Inheritance-based Proxies strategy that expect to create a child class of my configuration class (the one annoted by #Configuration) and it is does:
For each bean, an instance is cached in the child class
Child class only calls super at first instantiation
So the child class is the entry point because the following behavior is implemented by this child class:
public class AppConfig$$EnhancerByCGLIB$ extends AppConfig {
public AccountRepository accountRepository() {
// if bean is in the applicationContext
// return bean
// else call super.accountRepository() and store bean in context
}
public TransferService transferService() {
// if bean is in the applicationContext, return bean
// else call super.transferService() and store bean in context
}
.....................................................
.....................................................
.....................................................
}
So if I annotate a configuration class with final Spring can't have this behavior because in Java a final class cannot be subclassed
Is it correct?
Using the same reasoning can I also assert that in Spring I can't have a final method annoted with #Bean annotation?
Because, as shown in the previous example, I have that when at startup time is created the child class (the proxy) of my configuration class happens that for each bean, an instance is cached in the child class and if it is final it is not possible (but I am absolutly not sure about this assertion)
Am I missing something? Can you give me the exact explaination?
Tnx
Spring creates dynamic proxies for classes annotated with #Configuration classes. Spring uses CGLIB to extend your class to create proxy. Hence, configuration classes cannot be final.
Regarding accountRepository() being invoked twice:
If you invoke accountRepository() method to create an instance, it is no more a Spring managed bean. Spring will not have any idea of the instances created in this manner. Hence, you will end up with multiple instances of JdbcAccountRepository
You can preserve the singleton behavior if you configure as below:
#Bean
public TransferService transferService(JdbcAccountRepository jdbcAcctRepo) {
TransferServiceImpl service = new TransferServiceImpl();
service.setAccountRepository(jdbcAcctRepo);
return service;
}
#Bean
public AccountService accountService(JdbcAccountRepository jdbcAcctRepo) {
return new AccountServiceImpl(jdbcAcctRepo);
}
I am using #ComponentScan and #Component to define my spring beans. What I would like is to declare one of these beans to be autowire-candidate=false.
This could be done with this attribute in xml. Isn't there the equivalent in annotations?
The reason I want this is because I have 2 implementations of the same interface and I don't want to use #Qualifier.
EDIT: Using #Primary is a valid work-around, but autowire-candidate seems to me like a useful feature with its own semantics.
Thanks
Looks like Spring refused autowire-candidate=false concept and it no longer supported. There is no analogue with annotations, so #Primary is the best work-around as you noticed.
Another way is to use custom org.springframework.beans.factory.support.AutowireCandidateResolver, which is used in DefaultListableBeanFactory, with logic that exclude undesirable beans from autowire candidates. In such case, the technology will be similar to that used for autowire-candidate=false in SimpleAutowireCandidateResolver.
Since Spring 5.1 , you can configure autowire-candidate in #Bean through autowireCandidate attribute:
#Bean(autowireCandidate = false)
public FooBean foo() {
return newFooBean();
}
You can also use the bean accessor to tune it's visibiltiy.
see Bean visibility
#Configuration
public abstract class VisibilityConfiguration {
#Bean
public Bean publicBean() {
Bean bean = new Bean();
bean.setDependency(hiddenBean());
return bean;
}
#Bean
protected Bean hiddenBean() {
return new Bean("protected bean");
}
}
You can then #Autowire the Bean class and it will autowire the public bean (without complaining about multiple matching beans)
As a class' definition (unless embedded) does not allow private / protected accessor the work around would be to use an #Configuration class that would instantiate all the beans an publish the public beans while hiding the private/protected (instead of directly annotating the classes #Component \ #Service)
Also package-protected accessor may worth a try to hide #Component annotated classes. I don't know if that may work.
We can do this by using the #Qualifier annotations with name mentioned in the #Component annotations
Bean classes -
#Component("fooFormatter")
public class FooFormatter implements Formatter {
public String format() {
return "foo";
}
}
#Component("barFormatter")
public class BarFormatter implements Formatter {
public String format() {
return "bar";
}
}
Injecting bean in service class -
public class FooService {
#Autowired
#Qualifier("fooFormatter")
private Formatter formatter;
}
For more details please refer - https://www.baeldung.com/spring-autowire#disambiguation. Above example taken from this link.
I understand that #Component annotation was introduced in spring 2.5 in order to get rid of xml bean definition by using classpath scanning.
#Bean was introduced in spring 3.0 and can be used with #Configuration in order to fully get rid of xml file and use java config instead.
Would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation? My understanding is that the final goal is to create beans in both cases.
#Component
Preferable for component scanning and automatic wiring.
When should you use #Bean?
Sometimes automatic configuration is not an option. When? Let's imagine that you want to wire components from 3rd-party libraries (you don't have the source code so you can't annotate its classes with #Component), so automatic configuration is not possible.
The #Bean annotation returns an object that spring should register as bean in application context. The body of the method bears the logic responsible for creating the instance.
#Component and #Bean do two quite different things, and shouldn't be confused.
#Component (and #Service and #Repository) are used to auto-detect and auto-configure beans using classpath scanning. There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach, since it's purely declarative.
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically as above. It decouples the declaration of the bean from the class definition, and lets you create and configure beans exactly how you choose.
To answer your question...
would it have been possible to re-use the #Component annotation instead of introducing #Bean annotation?
Sure, probably; but they chose not to, since the two are quite different. Spring's already confusing enough without muddying the waters further.
#Component auto detects and configures the beans using classpath scanning whereas #Bean explicitly declares a single bean, rather than letting Spring do it automatically.
#Component does not decouple the declaration of the bean from the class definition where as #Bean decouples the declaration of the bean from the class definition.
#Component is a class level annotation whereas #Bean is a method level annotation and name of the method serves as the bean name.
#Component need not to be used with the #Configuration annotation where as #Bean annotation has to be used within the class which is annotated with #Configuration.
We cannot create a bean of a class using #Component, if the class is outside spring container whereas we can create a bean of a class using #Bean even if the class is present outside the spring container.
#Component has different specializations like #Controller, #Repository and #Service whereas #Bean has no specializations.
Let's consider I want specific implementation depending on some dynamic state.
#Bean is perfect for that case.
#Bean
#Scope("prototype")
public SomeService someService() {
switch (state) {
case 1:
return new Impl1();
case 2:
return new Impl2();
case 3:
return new Impl3();
default:
return new Impl();
}
}
However there is no way to do that with #Component.
Both approaches aim to register target type in Spring container.
The difference is that #Bean is applicable to methods, whereas #Component is applicable to types.
Therefore when you use #Bean annotation you control instance creation logic in method's body (see example above). With #Component annotation you cannot.
I see a lot of answers and almost everywhere it's mentioned #Component is for autowiring where component is scanned, and #Bean is exactly declaring that bean to be used differently. Let me show how it's different.
#Bean
First it's a method level annotation.
Second you generally use it to configure beans in Java code (if you are not using xml configuration) and then call it from a class using the
ApplicationContext.getBean method. Example:
#Configuration
class MyConfiguration{
#Bean
public User getUser() {
return new User();
}
}
class User{
}
// Getting Bean
User user = applicationContext.getBean("getUser");
#Component
It is the general way to annotate a bean and not a specialized bean.
It is a class level annotation and is used to avoid all that configuration stuff through java or xml configuration.
We get something like this.
#Component
class User {
}
// to get Bean
#Autowired
User user;
That's it. It was just introduced to avoid all the configuration steps to instantiate and use that bean.
You can use #Bean to make an existing third-party class available to your Spring framework application context.
#Bean
public ViewResolver viewResolver() {
InternalResourceViewResolver viewResolver = new InternalResourceViewResolver();
viewResolver.setPrefix("/WEB-INF/view/");
viewResolver.setSuffix(".jsp");
return viewResolver;
}
By using the #Bean annotation, you can wrap a third-party class (it may not have #Component and it may not use Spring), as a Spring bean. And then once it is wrapped using #Bean, it is as a singleton object and available in your Spring framework application context. You can now easily share/reuse this bean in your app using dependency injection and #Autowired.
So think of the #Bean annotation is a wrapper/adapter for third-party classes. You want to make the third-party classes available to your Spring framework application context.
By using #Bean in the code above, I'm explicitly declare a single bean because inside of the method, I'm explicitly creating the object using the new keyword. I'm also manually calling setter methods of the given class. So I can change the value of the prefix field. So this manual work is referred to as explicit creation. If I use the #Component for the same class, the bean registered in the Spring container will have default value for the prefix field.
On the other hand, when we annotate a class with #Component, no need for us to manually use the new keyword. It is handled automatically by Spring.
When you use the #Component tag, it's the same as having a POJO (Plain Old Java Object) with a vanilla bean declaration method (annotated with #Bean). For example, the following method 1 and 2 will give the same result.
Method 1
#Component
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with a bean for 'theNumber':
#Bean
Integer theNumber(){
return new Integer(3456);
}
Method 2
//Note: no #Component tag
public class SomeClass {
private int number;
public SomeClass(Integer theNumber){
this.number = theNumber.intValue();
}
public int getNumber(){
return this.number;
}
}
with the beans for both:
#Bean
Integer theNumber(){
return new Integer(3456);
}
#Bean
SomeClass someClass(Integer theNumber){
return new SomeClass(theNumber);
}
Method 2 allows you to keep bean declarations together, it's a bit more flexible etc. You may even want to add another non-vanilla SomeClass bean like the following:
#Bean
SomeClass strawberryClass(){
return new SomeClass(new Integer(1));
}
You have two ways to generate beans.
One is to create a class with an annotation #Component.
The other is to create a method and annotate it with #Bean. For those classes containing method with #Bean should be annotated with #Configuration
Once you run your spring project, the class with a #ComponentScan annotation would scan every class with #Component on it, and restore the instance of this class to the Ioc Container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
So when you need to decide which kind of beans you want to create depending upon current states, you need to use #Bean. You can write the logic and return the object you want.
Another thing worth to mention is the name of the method with #Bean is the default name of bean.
Difference between Bean and Component:
#component and its specializations(#Controller, #service, #repository) allow for auto-detection
using classpath scanning. If we see component class like #Controller, #service, #repository will be scan automatically by the spring framework using the component scan.
#Bean on the other hand can only be used to explicitly declare a single bean in a configuration class.
#Bean used to explicitly declare a single bean, rather than letting spring do it automatically. Its make septate declaration of bean from the class definition.
In short #Controller, #service, #repository are for auto-detection and #Bean to create seprate bean from class
- #Controller
public class LoginController
{ --code-- }
- #Configuration
public class AppConfig {
#Bean
public SessionFactory sessionFactory()
{--code-- }
Spring supports multiple types annotations such as #Component, #Service, #Repository. All theses can be found under the org.springframework.stereotype package.
#Bean can be found under the org.springframework.context.annotation package.
When classes in our application are annotated with any of the above mentioned annotation then during project startup spring scan(using #ComponentScan) each class and inject the instance of the classes to the IOC container. Another thing the #ComponentScan would do is running the methods with #Bean on it and restore the return object to the Ioc Container as a bean.
#Component
If we mark a class with #Component or one of the other Stereotype annotations these classes will be auto-detected using classpath scanning. As long as these classes are in under our base package or Spring is aware of another package to scan, a new bean will be created for each of these classes.
package com.beanvscomponent.controller;
import org.springframework.stereotype.Controller;
#Controller
public class HomeController {
public String home(){
return "Hello, World!";
}
}
There's an implicit one-to-one mapping between the annotated class and the bean (i.e. one bean per class). Control of wiring is quite limited with this approach since it's purely declarative. It is also important to note that the stereotype annotations are class level annotations.
#Bean
#Bean is used to explicitly declare a single bean, rather than letting Spring do it automatically like we did with #Controller. It decouples the declaration of the bean from the class definition and lets you create and configure beans exactly how you choose. With #Bean you aren't placing this annotation at the class level. If you tried to do that you would get an invalid type error. The #Bean documentation defines it as:
Indicates that a method produces a bean to be managed by the Spring container.
Typically, #Bean methods are declared within #Configuration classes.We have a user class that we needed to instantiate and then create a bean using that instance. This is where I said earlier that we have a little more control over how the bean is defined.
package com.beanvscomponent;
public class User {
private String first;
private String last;
public User(String first, String last) {
this.first = first;
this.last = last;
}
}
As i mentioned earlier #Bean methods should be declared within #Configuration classes.
package com.beanvscomponent;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
#Configuration
public class ApplicationConfig {
#Bean
public User superUser() {
return new User("Partho","Bappy");
}
}
The name of the method is actually going to be the name of our bean. If we pull up the /beans endpoint in the actuator we can see the bean defined.
{
"beans": "superUser",
"aliases": [],
"scope": "singleton",
"type": "com.beanvscomponent.User",
"resource": "class path resource
[com/beanvscomponent/ApplicationConfig.class]",
"dependencies": []
}
#Component vs #Bean
I hope that cleared up some things on when to use #Component and when to use #Bean. It can be a little confusing but as you start to write more applications it will become pretty natural.
#Bean was created to avoid coupling Spring and your business rules in compile time. It means you can reuse your business rules in other frameworks like PlayFramework or JEE.
Moreover, you have total control on how create beans, where it is not enough the default Spring instantation.
I wrote a post talking about it.
https://coderstower.com/2019/04/23/factory-methods-decoupling-ioc-container-abstraction/
1. About #Component
#Component functs similarily to #Configuration.
They both indicate that the annotated class has one or more beans need to be registered to Spring-IOC-Container.
The class annotated by #Component, we call it Component of Spring. It is a concept that contains several beans.
Component class needs to be auto-scanned by Spring for registering those beans of the component class.
2. About #Bean
#Bean is used to annotate the method of component-class(as mentioned above). It indicate the instance retured by the annotated method needs to be registered to Spring-IOC-Container.
3. Conclusion
The difference between them two is relatively obivious, they are used in different circumstances.
The general usage is:
// #Configuration is implemented by #Component
#Configuration
public ComponentClass {
#Bean
public FirstBean FirstBeanMethod() {
return new FirstBean();
}
#Bean
public SecondBean SecondBeanMethod() {
return new SecondBean();
}
}
Additional Points from above answers
Let’s say we got a module which is shared in multiple apps and it contains a few services. Not all are needed for each app.
If use #Component on those service classes and the component scan in the application,
we might end up detecting more beans than necessary
In this case, you either had to adjust the filtering of the component scan or provide the configuration that even the unused beans can run. Otherwise, the application context won’t start.
In this case, it is better to work with #Bean annotation and only instantiate those beans,
which are required individually in each app
So, essentially, use #Bean for adding third-party classes to the context. And #Component if it is just inside your single application.
#Bean can be scoped and #component cannot
such as
#Scope(value = WebApplicationContext.SCOPE_REQUEST, proxyMode = ScopedProxyMode.TARGET_CLASS)