I am trying to use windowbuilder on eclipse oxygen 4.7.3a on macOS highSierra. it installed fine but every time I try to open the design part it displays this error
Eclipse is running under 0, but this Java project has a 1.8 Java
compliance level, so WindowBuilder will not be able to load classes
from this project. Use a lower level of Java for the project, or run
Eclipse using a newer Java version.
I tried everything. like changing the running enviroment, .jre files, try different JDE. nothing working. any suggestions?
Your only short term solution is to use a Java version <= 9.
Initially WindowBuilder did not work with Java 9 for several reasons. See
Bug 526098 - WindowBuilder fails to work on Java 9.
One of those issues was that the the System Property java.version was unexpectedly just "9":
Please check that you have exactly 9.0 JDK, it worked for me with
9.0.1 until I downgraded target JRE to 9.0, which has unusual System.getProperty("java.version").equals("9")
The fixes to get WindowsBuilder working on Java 9 were only completed on 2/21/18, and based on your error it looks like a similar issue exists when running WindowsBuilder using Java 10. I suggest you create a Bug Report with Eclipse.
See also:
SO Post Eclipse Oxygen Window Builder Error with Java SE 10.0.1 where the solution/workaround was to regress to Java 9.
This Eclipse Forum post where a user is reporting a similar problem to yours.
Uninstall Java Version and Install lower version of Java(8).Support for WindowBuilder is not provided anymore.
How to uninstall current version?(Mac)
Go to /Library/Java/JavaVirtualMachines/ to see current version of java and replace jdk1.8.0_131.jdk with yours.
sudo rm -rf /Library/Java/JavaVirtualMachines/jdk1.8.0_131.jdk
sudo rm -rf /Library/PreferencePanes/JavaControlPanel.prefPane
sudo rm -rf /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo rm -rf ~/Library/Application\ Support/Oracle/Java
Install Java 8:
https://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html
Then:
Right click on your project and go to Properties
Make sure your configuration look like this,
At the top of picture Configure Workspace settings click on it (Uncheck project specification settings) and then see image below
Apply same as in picture Then enable "project specification settings"
Restart Your Eclipse
Done!!
I'm working on MacOS and just starting with react-native.
One of the first steps to get started is to run: react-native run-android or react-native run-ios. But I'm getting this error:
react-native run-android
Result:
Scanning folders for symlinks in /Users/ric/myprojs/albums/node_modules (6ms)
Starting JS server...
Building and installing the app on the device (cd android && ./gradlew installDebug)...
FAILURE: Build failed with an exception.
* What went wrong:
Could not determine java version from '9.0.1'.
* Try:
Run with --stacktrace option to get the stack trace. Run with --info or --debug option to get more log output.
Could not install the app on the device, read the error above for details.
Make sure you have an Android emulator running or a device connected and have
set up your Android development environment:
https://facebook.github.io/react-native/docs/android-setup.html
This is what I get when I run java --version:
java --version
Result:
java 9.0.1
Java(TM) SE Runtime Environment (build 9.0.1+11)
Java HotSpot(TM) 64-Bit Server VM (build 9.0.1+11, mixed mode)
mbp:albums ric$ java --version
java 9.0.1
Java(TM) SE Runtime Environment (build 9.0.1+11)
Java HotSpot(TM) 64-Bit Server VM (build 9.0.1+11, mixed mode)
Edit
My javac version:
javac --version
Result:
javac 9.0.1
Any idea on how to fix this?
In your PROJECT_PATH/android/gradle/wrapper/gradle-wrapper.properties file, update your distributionUrl to the following:
distributionUrl=https\://services.gradle.org/distributions/gradle-5.0-all.zip
See related gradle distributions documentation
Really the fastest way to get around this error is to use JDK 8. Except when you really need to use JDK9.
http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html
Don't forget to change your enviroment variable JAVA_HOME to the new JDK version!
Make sure that you have JDK8 installed and then set JAVA_HOME into JDK8
for example:
export JAVA_HOME=/Library/Java/JavaVirtualMachines/jdk1.8.0_151.jdk/Contents/Home
or use .bash_* files to set this variable
vi ~/.bash_profile
Then add the following lines:
export ANDROID_HOME=$HOME/Library/Android/sdk
export PATH=$PATH:$ANDROID_HOME/tools
export PATH=$PATH:$ANDROID_HOME/tools/bin
export PATH=$PATH:$ANDROID_HOME/platform-tools
export JAVA_HOME=$(/usr/libexec/java_home -v 1.8)
Now source the file to make the above changes effective in the current shell:
source ~/.bash_profile
On MacOS, I ran the following commands:
brew cask uninstall java
brew tap caskroom/versions
brew cask install java8 "or just brew cask install java to install latest version"
I was getting this error, but for a more recent version of Java - 10.0.2.
To fix my error, I followed the steps mentioned by #Blacktoviche in this Github issue: https://github.com/facebook/react-native/issues/17688
When I opened the android folder inside my project via Android Studio, I was prompted with Android Gradle plugin update recommended. At the time, I was following a slightly outdated tutorial that told me to click Don't remind me again for this project.
However, as #Blacktoviche recommended in the github issue linked above, sometimes it's necessary to update the Gradle plugin. After updating, I also had to click Install Build Tools 27... and sync project (I don't remember the exact version).
After I followed these steps, I was able to successfully run my react native app on the Android Studio emulator.
Hope this helps someone!
---- December 2018 --- keep attention ---
React Native does not work with Java versions higher than 8, so you need to uninstall your 9.0.1 version. To do so, execute the following commands:
cd /Library/Java/JavaVirtualMachines/
ls -l
Identify the folder containing your Java Version, then remove it
sudo rm -rf jdk.x.x_xxx.jdk
After that you can download and install java 8 from oracle again. Refer to jdk8 download page
If you are using windows; Make sure you add your jdk path to the Environment path variable.
Then open your android folder from your react native project into android studio. It will update necessary things for you automatically.
I usually get this error when I forget to build the project using Android Studio. A simple sync and upgrading Gradle will do the work.
I solve this by downgrading my JDK to 8.
On Ubuntu, you should run these command lines in the terminal:
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt install oracle-java8-installer
sudo apt install oracle-java8-set-default
I want to install Eclipse in my Mac (Yosemite OS Installed). But there is an error popup :
I Check my java configuration and i have 1.7 instaled.
I made the update in System preference > Java
And i know that i have the installation of JAva 8 in my computer because when i type in my terminal this command:
/Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin/Contents/Home/bin/java -version
I have java 1.8
But in my Os use the version 1.7 and not 1.8 what i have to do?
And why it is so difficult to do that, why it is not enough to update via System > Preferences
Thanks for you Help!
I made this via homebrew and it work for me:
brew update
brew cask install java
It is now installed in java_home like the version 1.7
But until the first version is in use.
Now You just have to export to JAVA_HOME variable with this command:
export JAVA_HOME=`/usr/libexec/java_home -v '1.8*'`
And it work
Thanks!
The JavaAppletPlugin.plugin Java is just the JRE, you need the full JDK to run Eclipse (and other Java applications) on a Mac.
So download and install the Java 8 JDK from the official Oracle site
Try this on a terminal window
echo $JAVA_HOME
you might get something like /Library/Java/JavaVirtualMachines/jdk1.8.0_111.jdk/Contents/Home (<-- that's mine, java 8)
Yours might point to Java 7. You can change JAVA_HOME to point to your Java 8 installation by doing
export JAVA_HOME=<path-to-java8-installation>
And then it should work.
(btw: your installation dir for Java 8 looks rather odd. you might want to re-install so that it is on a path that looks like mine above)
Install homebrew
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
See Homebrew homepage here
Install java using homebrew
a. brew update
b. brew tap caskroom/cask
c. brew install brew-cask
d. brew cask install java
See full instructions at (tomysmile/brew-java-and-jenv.md)[https://gist.github.com/tomysmile/a9a7aee85ff73454bd57e198ad90e614]
Install jenv, a java environment manager
brew install jenv
Add jenv to your path - see jenv page above
Add java path using jenv
jenv add /Library/Java/JavaVirtualMachines/your-jdk-version/Contents/Home
Replace your-jdk-version with the version of jdk you have installed on your system
Restart eclipse and that's it
How can I install an additional java on MacOS? I installed jdk8 and that works fine. But now I need a jdk7 installation for development purposes. When trying to install the old version via DMG file, i get a warning, that there is already a newer version of java installed and the installer quits.
/usr/libexec/java_home -verbose
Matching Java Virtual Machines (1):
1.8.0_20, x86_64: "Java SE 8" /Library/Java/JavaVirtualMachines/jdk1.8.0_20.jdk/Contents/Home
/Library/Java/JavaVirtualMachines/jdk1.8.0_20.jdk/Contents/Home
How to install jdk7 in addition to this one?
The cleanest way to manage multiple java versions on Mac is to use Homebrew.
And within Homebrew, use:
homebrew-cask to install the versions of java
jenv to manage the installed versions of java
As seen on http://hanxue-it.blogspot.ch/2014/05/installing-java-8-managing-multiple.html , these are the steps to follow.
install homebrew
install homebrew jenv
install homebrew-cask
install a specific java version using cask (see "homebrew-cask versions" paragraph below)
add this version for jenv to manage it
check the version is correctly managed by jenv
repeat steps 4 to 6 for each version of java you need
homebrew-cask versions
Add the homebrew/cask-versions tap to homebrew using:
brew tap homebrew/cask-versions
Then you can look at all the versions available:
brew search java
Then you can install the version(s) you like:
brew install --cask java7
brew install --cask java6
And add them to be managed by jenv as usual.
jenv add <javaVersionPathHere>
I think this is the cleanest & simplest way to go about it.
Another important thing to note, as mentioned in Mac OS X 10.6.7 Java Path Current JDK confusing :
For different types of JDKs or installations, you will have different
paths
You can check the paths of the versions installed using /usr/libexec/java_home -V, see How do I check if the Java JDK is installed on Mac?
On Mac OS X Mavericks, I found as following:
Built-in JRE default: /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin/Contents/Home
JDKs downloaded from Apple: /System/Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home/
JDKs downloaded from Oracle: /Library/Java/JavaVirtualMachines/jdk1.8.0_11.jdk/Contents/Home
Resources
Removing Java 8 JDK from Mac
http://hanxue-it.blogspot.ch/2014/05/installing-java-8-managing-multiple.html
http://sourabhbajaj.com/mac-setup/index.html
http://brew.sh
https://github.com/Homebrew/homebrew/tree/master/share/doc/homebrew#readme
http://sourabhbajaj.com/mac-setup/Homebrew/README.html
"brew tap” explained https://github.com/Homebrew/homebrew/blob/master/share/doc/homebrew/brew-tap.md
“brew versions” explained Homebrew install specific version of formula? and also https://github.com/Homebrew/homebrew-versions
https://github.com/caskroom/homebrew-cask
“cask versions”, similar to “brew versions”, see https://github.com/caskroom/homebrew-versions and also https://github.com/caskroom/homebrew-cask/issues/9447
http://www.jenv.be
https://github.com/gcuisinier/jenv
Uninstall jdk8, install jdk7, then reinstall jdk8.
My approach to switching between them (in .profile) :
export JAVA_7_HOME=$(/usr/libexec/java_home -v1.7)
export JAVA_8_HOME=$(/usr/libexec/java_home -v1.8)
export JAVA_9_HOME=$(/usr/libexec/java_home -v9)
alias java7='export JAVA_HOME=$JAVA_7_HOME'
alias java8='export JAVA_HOME=$JAVA_8_HOME'
alias java9='export JAVA_HOME=$JAVA_9_HOME'
#default java8
export JAVA_HOME=$JAVA_8_HOME
Then you can simply type java7 or java8 in a terminal to switch versions.
(edit: updated to add Dylans improvement for Java 9)
For macOS Sierra 420
This guide was cobbled together from various sources (replies above as well as other posts), and works perfect.
0. If you haven't already, install homebrew.
See https://brew.sh/
1. Install jenv
brew install jenv
2. Add jenv to the bash profile
if which jenv > /dev/null; then eval "$(jenv init -)"; fi
3. Add jenv to your path
export PATH="$HOME/.jenv/shims:$PATH"
4. Tap "homebrew/cask-versions"
FYI: "Tap" extends brew's list of available repos it can install, above and beyond brew's default list of available repos.
brew tap homebrew/cask-versions
5. Install the latest version of java
brew install java --cask
6. Install java 6 (or 7 or 8 whatever you need)
brew install java6 --cask
#brew install java7 --cask
#brew install java8 --cask
? Maybe close and restart Terminal so it sees any new ENV vars that got setup.
7. Review Installations
All Java version get installed here: /Library/Java/JavaVirtualMachines lets take a look.
ls -la /Library/Java/JavaVirtualMachines
8. Add each path to jenv one-at-a-time.
We need to add "/Contents/Home" to the version folder.
WARNING: Use the actual paths on your machine... these are just EXAMPLE's
jenv add /Library/Java/JavaVirtualMachines/1.6.0___EXAMPLE___/Contents/Home
jenv add /Library/Java/JavaVirtualMachines/jdk-9.0.1.jdk___EXAMPLE___/Contents/Home
9. Check if jenv registered OK
jenv versions
10. Set java version to use (globably)
Where XX matches one of the items in the versions list above.
jenv global XX
Check java version
java -version
Check jenv versions
Should also indicate the current version being used with an asterisk.
jenv versions
DONE
Quick future reference
To change java versions
... See the list of available java versions
jenv versions
... then, where XX matches an item in the list above
jenv global XX
SDKMAN! is a great tool for using multiple versions of Java, Gradle, Groovy, Kotlin, and other JVM tools on Mac OS. Installation and usage doc are easily found on the main site.
(I have no affiliation, just a happy user).
As an example usage, if I type the following in a Terminal window, there is a list of available Java SDK versions (edited for brevity):
$ sdk list java
Available Java Versions
+ 9ea170
> + 8u131
7u141-zulu
Here + denotes that the version is installed. > denotes which version is currently in use. To install a version:
$ sdk install java 7u141-zulu
To use a version in this Terminal window:
$ sdk use java 9ea170
First, you need to make certain you have multiple JAVA versions installed.
Open a new Terminal window and input:
/usr/libexec/java_home -V
Your output should look like:
Matching Java Virtual Machines (2):
11.0.1, x86_64: "Java SE 11.0.1" /Library/Java/JavaVirtualMachines/jdk-11.0.1.jdk/Contents/Home
1.8.0_201, x86_64: "Java SE 8" /Library/Java/JavaVirtualMachines/jdk1.8.0_201.jdk/Contents/Home
Note that there are two JDKs available. If you don’t notice the Java version you need to switch to, download and install the appropriate one from here https://www.oracle.com/java/technologies/downloads/
(JDK 8 is represented as 1.8) .
Once you have installed the appropriate JDK, repeat this step.
Take note of the JDK version you want to switch to. For example, “11.0” and “1.8” are the JDK versions available in the example above.
Switch to the desired version. For example, if you wish to switch to JDK 8, input the following line:
export JAVA_HOME=/usr/libexec/java_home -v 1.8
For 11.0, switch “1.8” with “11.0”
4. Check your JDK version by inputting into Terminal:
java -version
If you have followed all the steps correctly, the JDK version should correlate with the one you specified in the last step.
5. (Optional) To make this the default JDK version, input the following in Terminal:
open ~/.bash_profile
Then, add your Terminal input from step 3 to this file:
SWITCH TO JAVA VERSION 8
export JAVA_HOME=`/usr/libexec/java_home -v 1.8`
Save and close the file.
As found on this website
So Let’s begin by installing jEnv
Run this in the terminal
brew install https://raw.github.com/gcuisinier/jenv/homebrew/jenv.rb
Add jEnv to the bash profile
if which jenv > /dev/null; then eval "$(jenv init -)"; fi
When you first install jEnv will not have any JDK associated with it.
For example, I just installed JDK 8 but jEnv does not know about it. To check Java versions on jEnv
At the moment it only found Java version(jre) on the system. The * shows the version currently selected. Unlike rvm and rbenv, jEnv cannot install JDK for you. You need to install JDK manually from Oracle website.
Install JDK 6 from Apple website. This will install Java in /System/Library/Java/JavaVirtualMachines/. The reason we are installing Java 6 from Apple website is that SUN did not come up with JDK 6 for MAC, so Apple created/modified its own deployment version.
Similarly install JDK7 and JDK8.
Add JDKs to jEnv.
JDK 6:
JDK 7:
JDK 8:
Check the java versions installed using jenv
So now we have 3 versions of Java on our system. To set a default version use the command
jenv local <jenv version>
Ex – I wanted Jdk 1.6 to start IntelliJ
jenv local oracle64-1.6.0.65
check the java version
java -version
That’s it. We now have multiple versions of java and we can switch between them easily. jEnv also has some other features, such as wrappers for Gradle, Ant, Maven, etc, and the ability to set JVM options globally or locally. Check out the documentation for more information.
In the same spirit than #Vegard (lightweight):
Install the wanted JDKs with Homebrew
Put this jdk bash function and a default in your .profile
jdk() {
version=$1
export JAVA_HOME=$(/usr/libexec/java_home -v"$version");
java -version
}
export JAVA_HOME=$(/usr/libexec/java_home -v11); # Your default version
and then, to switch your jdk, you can do
jdk 9
jdk 11
jdk 13
Based on https://github.com/AdoptOpenJDK/homebrew-openjdk.
Manage multiple java version in MAC using jenv
Install homebrew using following command
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
install jenv and activate jenv
brew install jenv
echo 'eval "$(jenv init -)"' >> ~/.bash_profile
tap cask-versions
brew tap homebrew/cask-versions
search available java version that can be installed
brew search java
E.g. to install java6 use following command
brew install cask java6
Add multiple versions of java in jenv
jenv add /Library/Java/JavaVirtualMachines/jdk1.8.0_231.jdk/Contents/Home
jenv add /Library/Java/JavaVirtualMachines/1.6.0.jdk/Contents/Home
Note:- if you get error like ln: /Users/<username>/.jenv/versions/oracle64-1.8.0.231: No such file or directory, then run following:-
mkdir -p /Users/<username>/.jenv/versions/oracle64-1.8.0.231
Rehash jenv after adding jdk’s
jenv rehash
List known versions of java to jenv
jenv versions
Set default version
jenv global oracle64-1.8.0.231
Change java version for a project
jenv local oracle64-1.6.0.65
set JAVA_HOME with the same version as jenv
jenv exec bash
echo $JAVA_HOME
I find this Java version manager called Jabba recently and the usage is very similar to version managers of other languages like rvm(ruby), nvm(node), pyenv(python), etc. Also it's cross platform so definitely it can be used on Mac.
After installation, it will create a dir in ~/.jabba to put all the Java versions you install. It "Supports installation of Oracle JDK (default) / Server JRE, Zulu OpenJDK (since 0.3.0), IBM SDK, Java Technology Edition (since 0.6.0) and from custom URLs.".
Basic usage is listed on their Github. A quick summary to start:
curl -sL https://github.com/shyiko/jabba/raw/master/install.sh | bash && . ~/.jabba/jabba.sh
# install Oracle JDK
jabba install 1.8 # "jabba use 1.8" will be called automatically
jabba install 1.7 # "jabba use 1.7" will be called automatically
# list all installed JDK's
jabba ls
# switch to a different version of JDK
jabba use 1.8
I am using Mac OS X 10.9.5. This is how I manage multiple JDK/JRE on my machine when I need one version to run application A and use another version for application B.
I created the following script after getting some help online.
#!bin/sh
function setjdk() {
if [ $# -ne 0 ]; then
removeFromPath '/Library/Java/JavaVirtualMachines/'
if [ -n "${JAVA_HOME+x}" ]; then
removeFromPath $JAVA_HOME
fi
export JAVA_HOME=/Library/Java/JavaVirtualMachines/$1/Contents/Home
export PATH=$JAVA_HOME/bin:$PATH
fi
}
function removeFromPath() {
export PATH=$(echo $PATH | sed -E -e "s;:$1;;" -e "s;$1:?;;")
}
#setjdk jdk1.8.0_60.jdk
setjdk jdk1.7.0_15.jdk
I put the above script in .profile file. Just open terminal, type vi .profile, append the script with the above snippet and save it. Once your out type source .profile, this will run your profile script without you having to restart the terminal. Now type java -version it should show 1.7 as your current version. If you intend to change it to 1.8 then comment the line setjdk jdk1.7.0_15.jdk and uncomment the line setjdk jdk1.8.0_60.jdk. Save the script and run it again with source command. I use this mechanism to manage multiple versions of JDK/JRE when I have to compile 2 different Maven projects which need different java versions.
Jenv on Mac Sierra:
if not working after install, do this bug fix to add java executable to path
export PATH="$HOME/.jenv/shims:$PATH"
even though eval "$(jenv init -)" could do this job. The reason is /bin folder is not there anymore as describe in it's homepage, but shim folder is used as /bin instead.
Make sure ~/.jenv is there
which java may print /Library/...
jenv global 1.8
jenv shell 1.8
Eventually, which java gives you:
/Users/xxxx/.jenv/shims/java
I answer lately and I really recommand you to use SDKMAN instead of Homebrew.
With SDKMAN you can install easily different version of JAVA in your mac and switch from on version to another.
You can also use SDKMAN for ANT, GRADLE, KOTLIN, MAVEN, SCALA, etc...
To install a version in your mac you can run the command sdk install java 15.0.0.j9-adpt
I know that this question already have a lot of answers, but I want to share my solution only using Temurin and bash.
AdoptOpenJdk is deprecated and that is why I'm using Temurin.
1. Download Temurin using the mirrors or a package manager
$ brew install --cask temurin
And for other versions (like Java 8):
$ brew tap homebrew/cask-versions
$ brew install --cask temurin8
2. Add a bash script into your bash profile
Open your ~/.zshrc or ~/.bash_profile (depending on what you're using it)
And add this code:
set-jdk() {
jdkversion=$1
export JAVA_HOME=/Library/Java/JavaVirtualMachines/temurin-"$jdkversion".jdk/Contents/Home;
export PATH=$PATH:$JAVA_HOME/bin;
java -version
}
3. Restart your terminal and change your Java version
$ set-jdk N N being the Java version that you want and it's already installed
e.g.
$ set-jdk 8 To change to Java 8 / 1.8
Few considerations:
It will only keep the Java version on the terminal session that you used the set-jdk command
It won't set the Java version as global
When you want to add the JAVA_HOME into another script/application, you can set /Library/Java/JavaVirtualMachines/temurin-<version>.jdk/Contents/Home (change the for the desired Java version. Like this JD-GUI example)
Enjoy
As of 2023, brew install --cask zulu8 didn't work for me on Apple chip. brew install openjdk#8 also didn't not. The only one solution worked for me was brew install --cask adoptopenjdk8 and then of course vim ~/.zshrc and inside:
export JAVAC_HOME=/Library/Java/JavaVirtualMachines/adoptopenjdk-8.jdk/Contents/Home/
export JAVA_11_HOME=$(/usr/libexec/java_home -v11)
export JAVA_8_HOME=$(/usr/libexec/java_home -v1.8)
alias javac8='export JAVA_HOME=$JAVAC_HOME'
alias java11='export JAVA_HOME=$JAVA_11_HOME'
alias java8='export JAVA_HOME=$JAVA_8_HOME'
switch from terminal using javac8 to a freshly installed (different) version. Note: you can have different Java versions than me, so it's just an example.
Edit: for some reason it takes some time once it's activate. It seems to me a restart of a laptop is needed.
Here's a more DRY version for bash (Based on Vegard's answer)
Replace 1.7 and 1.8 with whatever versions you are interested with
and you'll get an alias called 'javaX'; where 'X' is the java version (7 / 8 in the snippet below) that will allow you to easily switch versions
for version in 1.7 1.8; do
v="${version: -1}"
h=JAVA_"$v"_HOME
export "$h"=$(/usr/libexec/java_home -v $version)
alias "java$v"="export JAVA_HOME=\$$h"
done
To install more recent versions of OpenJDK, I use this. Example for OpenJDK 14:
brew info adoptopenjdk
brew tap adoptopenjdk/openjdk
brew cask install adoptopenjdk14
See https://github.com/AdoptOpenJDK/homebrew-openjdk for current info.
I followed steps in below link - https://medium.com/#euedofia/fix-default-java-version-on-maven-on-mac-os-x-156cf5930078 and it worked for me.
cd /usr/local/Cellar/maven/3.5.4/bin/
nano mvn
--Update JAVA_HOME -> "${JAVA_HOME:-$(/usr/libexec/java_home)}"
mvn -version
New commands for installing Java via Homebrew:
brew cask install adoptopenjdk/openjdk/adoptopenjdk8
brew cask install adoptopenjdk/openjdk/adoptopenjdk11
See the homebrew-openjdk repo for the latest commands.
Installing Java
You can install Java via Homebrew, Jabba, SDKMAN or manually. See this answer for details on all the commands.
Switching Java versions*
You can switch Java versions with jenv Jabba, SDKMAN or manually. See details on all the switching commands here.
Best solutions
Jabba is designed to work on multiple platforms, so it's a good option if you want a solution that'll also work on Windows
Using Homebrew to download Java versions and jenv to switch versions provides a nice workflow. jenv makes it easy to work with Java versions stored in any directory on your machine, so it's a good alternative if you're interested in storing Java in non-default directories.
Using SDKMAN to download Javas and switch versions is another great alternative
Manually switching should be avoided because it's an unnecessary headache.
Function to manually switch Java versions
Here's the Bash / ZSH function for manually switching Java versions (by OpenJDK):
jdk() {
version=$1
export JAVA_HOME=$(/usr/libexec/java_home -v"$version");
java -version
}
There are great tools for switching Java versions, so I highly recommend against doing it manually.
Here is a great tutorial
https://medium.com/#chamikakasun/how-to-manage-multiple-java-version-in-macos-e5421345f6d0
by using jEnv installed by brew
or you can check out homebrew-openjdk
https://github.com/AdoptOpenJDK/homebrew-openjdk managing version using brew Tap
To find the available Java versions:
brew search java
To install the latest stable version (19 as of today):
brew info java
brew install java
For the system Java wrappers (eg: IDEs) to find the latest JDK, symlink it with:
sudo ln -sfn /opt/homebrew/opt/openjdk/libexec/openjdk.jdk /Library/Java/JavaVirtualMachines/openjdk.jdk
To install a specific version (11):
brew install java11
For the system, Java wrappers to find JDK 11:
sudo ln -sfn /opt/homebrew/opt/openjdk#11/libexec/openjdk.jdk /Library/Java/JavaVirtualMachines/openjdk-11.jdk
You can have one of the OpenJDK versions in your PATH. Add one of the following lines to your ~/.bash_profile
export PATH="/opt/homebrew/opt/openjdk/bin:$PATH
export PATH="/opt/homebrew/opt/openjdk#11/bin:$PATH
Then,
source ~/.bash_profile
I solved this error on my mac m1 air just by adding the path of new jdk version in ~/.zshrc file.
I have multiple jdks in my /Library/Java/JavaVirtualMachines path. So I can choose any version I wish to set as my default java path.