Develop Reference

ConcurrentModificationException, how to avoid? [duplicate]

AFAIK, there are two approaches:
Iterate over a copy of the collection
Use the iterator of the actual collection
For instance,
List<Foo> fooListCopy = new ArrayList<Foo>(fooList);
for(Foo foo : fooListCopy){
// modify actual fooList
}
and
Iterator<Foo> itr = fooList.iterator();
while(itr.hasNext()){
// modify actual fooList using itr.remove()
}
Are there any reasons to prefer one approach over the other (e.g. preferring the first approach for the simple reason of readability)?

Let me give a few examples with some alternatives to avoid a ConcurrentModificationException.
Suppose we have the following collection of books
List<Book> books = new ArrayList<Book>();
books.add(new Book(new ISBN("0-201-63361-2")));
books.add(new Book(new ISBN("0-201-63361-3")));
books.add(new Book(new ISBN("0-201-63361-4")));
Collect and Remove
The first technique consists in collecting all the objects that we want to delete (e.g. using an enhanced for loop) and after we finish iterating, we remove all found objects.
ISBN isbn = new ISBN("0-201-63361-2");
List<Book> found = new ArrayList<Book>();
for(Book book : books){
if(book.getIsbn().equals(isbn)){
found.add(book);
}
}
books.removeAll(found);
This is supposing that the operation you want to do is "delete".
If you want to "add" this approach would also work, but I would assume you would iterate over a different collection to determine what elements you want to add to a second collection and then issue an addAll method at the end.
Using ListIterator
If you are working with lists, another technique consists in using a ListIterator which has support for removal and addition of items during the iteration itself.
ListIterator<Book> iter = books.listIterator();
while(iter.hasNext()){
if(iter.next().getIsbn().equals(isbn)){
iter.remove();
}
}
Again, I used the "remove" method in the example above which is what your question seemed to imply, but you may also use its add method to add new elements during iteration.
Using JDK >= 8
For those working with Java 8 or superior versions, there are a couple of other techniques you could use to take advantage of it.
You could use the new removeIf method in the Collection base class:
ISBN other = new ISBN("0-201-63361-2");
books.removeIf(b -> b.getIsbn().equals(other));
Or use the new stream API:
ISBN other = new ISBN("0-201-63361-2");
List<Book> filtered = books.stream()
.filter(b -> b.getIsbn().equals(other))
.collect(Collectors.toList());
In this last case, to filter elements out of a collection, you reassign the original reference to the filtered collection (i.e. books = filtered) or used the filtered collection to removeAll the found elements from the original collection (i.e. books.removeAll(filtered)).
Use Sublist or Subset
There are other alternatives as well. If the list is sorted, and you want to remove consecutive elements you can create a sublist and then clear it:
books.subList(0,5).clear();
Since the sublist is backed by the original list this would be an efficient way of removing this subcollection of elements.
Something similar could be achieved with sorted sets using NavigableSet.subSet method, or any of the slicing methods offered there.
Considerations:
What method you use might depend on what you are intending to do
The collect and removeAl technique works with any Collection (Collection, List, Set, etc).
The ListIterator technique obviously only works with lists, provided that their given ListIterator implementation offers support for add and remove operations.
The Iterator approach would work with any type of collection, but it only supports remove operations.
With the ListIterator/Iterator approach the obvious advantage is not having to copy anything since we remove as we iterate. So, this is very efficient.
The JDK 8 streams example don't actually removed anything, but looked for the desired elements, and then we replaced the original collection reference with the new one, and let the old one be garbage collected. So, we iterate only once over the collection and that would be efficient.
In the collect and removeAll approach the disadvantage is that we have to iterate twice. First we iterate in the foor-loop looking for an object that matches our removal criteria, and once we have found it, we ask to remove it from the original collection, which would imply a second iteration work to look for this item in order to remove it.
I think it is worth mentioning that the remove method of the Iterator interface is marked as "optional" in Javadocs, which means that there could be Iterator implementations that throw UnsupportedOperationException if we invoke the remove method. As such, I'd say this approach is less safe than others if we cannot guarantee the iterator support for removal of elements.

Old Timer Favorite (it still works):
List<String> list;
for(int i = list.size() - 1; i >= 0; --i)
{
if(list.get(i).contains("bad"))
{
list.remove(i);
}
}
Benefits:
It only iterates over the list once
No extra objects created, or other unneeded complexity
No problems with trying to use the index of a removed item, because... well, think about it!

In Java 8, there is another approach. Collection#removeIf
eg:
List<Integer> list = new ArrayList<>();
list.add(1);
list.add(2);
list.add(3);
list.removeIf(i -> i > 2);

Are there any reasons to prefer one approach over the other
The first approach will work, but has the obvious overhead of copying the list.
The second approach will not work because many containers don't permit modification during iteration. This includes ArrayList.
If the only modification is to remove the current element, you can make the second approach work by using itr.remove() (that is, use the iterator's remove() method, not the container's). This would be my preferred method for iterators that support remove().

Only second approach will work. You can modify collection during iteration using iterator.remove() only. All other attempts will cause ConcurrentModificationException.

You can't do the second, because even if you use the remove() method on Iterator, you'll get an Exception thrown.
Personally, I would prefer the first for all Collection instances, despite the additional overheard of creating the new Collection, I find it less prone to error during edit by other developers. On some Collection implementations, the Iterator remove() is supported, on other it isn't. You can read more in the docs for Iterator.
The third alternative, is to create a new Collection, iterate over the original, and add all the members of the first Collection to the second Collection that are not up for deletion. Depending on the size of the Collection and the number of deletes, this could significantly save on memory, when compared to the first approach.

I would choose the second as you don't have to do a copy of the memory and the Iterator works faster. So you save memory and time.

You can see this sample; If we think remove odd value from a list:
public static void main(String[] args) {
Predicate<Integer> isOdd = v -> v % 2 == 0;
List<Integer> listArr = Arrays.asList(5, 7, 90, 11, 55, 60);
listArr = listArr.stream().filter(isOdd).collect(Collectors.toList());
listArr.forEach(System.out::println);
}

why not this?
for( int i = 0; i < Foo.size(); i++ )
{
if( Foo.get(i).equals( some test ) )
{
Foo.remove(i);
}
}
And if it's a map, not a list, you can use keyset()

Java get element from List while the size is changing [duplicate]

AFAIK, there are two approaches:
Iterate over a copy of the collection
Use the iterator of the actual collection
For instance,
List<Foo> fooListCopy = new ArrayList<Foo>(fooList);
for(Foo foo : fooListCopy){
// modify actual fooList
}
and
Iterator<Foo> itr = fooList.iterator();
while(itr.hasNext()){
// modify actual fooList using itr.remove()
}
Are there any reasons to prefer one approach over the other (e.g. preferring the first approach for the simple reason of readability)?

Let me give a few examples with some alternatives to avoid a ConcurrentModificationException.
Suppose we have the following collection of books
List<Book> books = new ArrayList<Book>();
books.add(new Book(new ISBN("0-201-63361-2")));
books.add(new Book(new ISBN("0-201-63361-3")));
books.add(new Book(new ISBN("0-201-63361-4")));
Collect and Remove
The first technique consists in collecting all the objects that we want to delete (e.g. using an enhanced for loop) and after we finish iterating, we remove all found objects.
ISBN isbn = new ISBN("0-201-63361-2");
List<Book> found = new ArrayList<Book>();
for(Book book : books){
if(book.getIsbn().equals(isbn)){
found.add(book);
}
}
books.removeAll(found);
This is supposing that the operation you want to do is "delete".
If you want to "add" this approach would also work, but I would assume you would iterate over a different collection to determine what elements you want to add to a second collection and then issue an addAll method at the end.
Using ListIterator
If you are working with lists, another technique consists in using a ListIterator which has support for removal and addition of items during the iteration itself.
ListIterator<Book> iter = books.listIterator();
while(iter.hasNext()){
if(iter.next().getIsbn().equals(isbn)){
iter.remove();
}
}
Again, I used the "remove" method in the example above which is what your question seemed to imply, but you may also use its add method to add new elements during iteration.
Using JDK >= 8
For those working with Java 8 or superior versions, there are a couple of other techniques you could use to take advantage of it.
You could use the new removeIf method in the Collection base class:
ISBN other = new ISBN("0-201-63361-2");
books.removeIf(b -> b.getIsbn().equals(other));
Or use the new stream API:
ISBN other = new ISBN("0-201-63361-2");
List<Book> filtered = books.stream()
.filter(b -> b.getIsbn().equals(other))
.collect(Collectors.toList());
In this last case, to filter elements out of a collection, you reassign the original reference to the filtered collection (i.e. books = filtered) or used the filtered collection to removeAll the found elements from the original collection (i.e. books.removeAll(filtered)).
Use Sublist or Subset
There are other alternatives as well. If the list is sorted, and you want to remove consecutive elements you can create a sublist and then clear it:
books.subList(0,5).clear();
Since the sublist is backed by the original list this would be an efficient way of removing this subcollection of elements.
Something similar could be achieved with sorted sets using NavigableSet.subSet method, or any of the slicing methods offered there.
Considerations:
What method you use might depend on what you are intending to do
The collect and removeAl technique works with any Collection (Collection, List, Set, etc).
The ListIterator technique obviously only works with lists, provided that their given ListIterator implementation offers support for add and remove operations.
The Iterator approach would work with any type of collection, but it only supports remove operations.
With the ListIterator/Iterator approach the obvious advantage is not having to copy anything since we remove as we iterate. So, this is very efficient.
The JDK 8 streams example don't actually removed anything, but looked for the desired elements, and then we replaced the original collection reference with the new one, and let the old one be garbage collected. So, we iterate only once over the collection and that would be efficient.
In the collect and removeAll approach the disadvantage is that we have to iterate twice. First we iterate in the foor-loop looking for an object that matches our removal criteria, and once we have found it, we ask to remove it from the original collection, which would imply a second iteration work to look for this item in order to remove it.
I think it is worth mentioning that the remove method of the Iterator interface is marked as "optional" in Javadocs, which means that there could be Iterator implementations that throw UnsupportedOperationException if we invoke the remove method. As such, I'd say this approach is less safe than others if we cannot guarantee the iterator support for removal of elements.

Old Timer Favorite (it still works):
List<String> list;
for(int i = list.size() - 1; i >= 0; --i)
{
if(list.get(i).contains("bad"))
{
list.remove(i);
}
}
Benefits:
It only iterates over the list once
No extra objects created, or other unneeded complexity
No problems with trying to use the index of a removed item, because... well, think about it!

In Java 8, there is another approach. Collection#removeIf
eg:
List<Integer> list = new ArrayList<>();
list.add(1);
list.add(2);
list.add(3);
list.removeIf(i -> i > 2);

Are there any reasons to prefer one approach over the other
The first approach will work, but has the obvious overhead of copying the list.
The second approach will not work because many containers don't permit modification during iteration. This includes ArrayList.
If the only modification is to remove the current element, you can make the second approach work by using itr.remove() (that is, use the iterator's remove() method, not the container's). This would be my preferred method for iterators that support remove().

Only second approach will work. You can modify collection during iteration using iterator.remove() only. All other attempts will cause ConcurrentModificationException.

You can't do the second, because even if you use the remove() method on Iterator, you'll get an Exception thrown.
Personally, I would prefer the first for all Collection instances, despite the additional overheard of creating the new Collection, I find it less prone to error during edit by other developers. On some Collection implementations, the Iterator remove() is supported, on other it isn't. You can read more in the docs for Iterator.
The third alternative, is to create a new Collection, iterate over the original, and add all the members of the first Collection to the second Collection that are not up for deletion. Depending on the size of the Collection and the number of deletes, this could significantly save on memory, when compared to the first approach.

I would choose the second as you don't have to do a copy of the memory and the Iterator works faster. So you save memory and time.

You can see this sample; If we think remove odd value from a list:
public static void main(String[] args) {
Predicate<Integer> isOdd = v -> v % 2 == 0;
List<Integer> listArr = Arrays.asList(5, 7, 90, 11, 55, 60);
listArr = listArr.stream().filter(isOdd).collect(Collectors.toList());
listArr.forEach(System.out::println);
}

why not this?
for( int i = 0; i < Foo.size(); i++ )
{
if( Foo.get(i).equals( some test ) )
{
Foo.remove(i);
}
}
And if it's a map, not a list, you can use keyset()

How do I remove all the same integers from an arraylist of objects? [duplicate]

AFAIK, there are two approaches:
Iterate over a copy of the collection
Use the iterator of the actual collection
For instance,
List<Foo> fooListCopy = new ArrayList<Foo>(fooList);
for(Foo foo : fooListCopy){
// modify actual fooList
}
and
Iterator<Foo> itr = fooList.iterator();
while(itr.hasNext()){
// modify actual fooList using itr.remove()
}
Are there any reasons to prefer one approach over the other (e.g. preferring the first approach for the simple reason of readability)?

Let me give a few examples with some alternatives to avoid a ConcurrentModificationException.
Suppose we have the following collection of books
List<Book> books = new ArrayList<Book>();
books.add(new Book(new ISBN("0-201-63361-2")));
books.add(new Book(new ISBN("0-201-63361-3")));
books.add(new Book(new ISBN("0-201-63361-4")));
Collect and Remove
The first technique consists in collecting all the objects that we want to delete (e.g. using an enhanced for loop) and after we finish iterating, we remove all found objects.
ISBN isbn = new ISBN("0-201-63361-2");
List<Book> found = new ArrayList<Book>();
for(Book book : books){
if(book.getIsbn().equals(isbn)){
found.add(book);
}
}
books.removeAll(found);
This is supposing that the operation you want to do is "delete".
If you want to "add" this approach would also work, but I would assume you would iterate over a different collection to determine what elements you want to add to a second collection and then issue an addAll method at the end.
Using ListIterator
If you are working with lists, another technique consists in using a ListIterator which has support for removal and addition of items during the iteration itself.
ListIterator<Book> iter = books.listIterator();
while(iter.hasNext()){
if(iter.next().getIsbn().equals(isbn)){
iter.remove();
}
}
Again, I used the "remove" method in the example above which is what your question seemed to imply, but you may also use its add method to add new elements during iteration.
Using JDK >= 8
For those working with Java 8 or superior versions, there are a couple of other techniques you could use to take advantage of it.
You could use the new removeIf method in the Collection base class:
ISBN other = new ISBN("0-201-63361-2");
books.removeIf(b -> b.getIsbn().equals(other));
Or use the new stream API:
ISBN other = new ISBN("0-201-63361-2");
List<Book> filtered = books.stream()
.filter(b -> b.getIsbn().equals(other))
.collect(Collectors.toList());
In this last case, to filter elements out of a collection, you reassign the original reference to the filtered collection (i.e. books = filtered) or used the filtered collection to removeAll the found elements from the original collection (i.e. books.removeAll(filtered)).
Use Sublist or Subset
There are other alternatives as well. If the list is sorted, and you want to remove consecutive elements you can create a sublist and then clear it:
books.subList(0,5).clear();
Since the sublist is backed by the original list this would be an efficient way of removing this subcollection of elements.
Something similar could be achieved with sorted sets using NavigableSet.subSet method, or any of the slicing methods offered there.
Considerations:
What method you use might depend on what you are intending to do
The collect and removeAl technique works with any Collection (Collection, List, Set, etc).
The ListIterator technique obviously only works with lists, provided that their given ListIterator implementation offers support for add and remove operations.
The Iterator approach would work with any type of collection, but it only supports remove operations.
With the ListIterator/Iterator approach the obvious advantage is not having to copy anything since we remove as we iterate. So, this is very efficient.
The JDK 8 streams example don't actually removed anything, but looked for the desired elements, and then we replaced the original collection reference with the new one, and let the old one be garbage collected. So, we iterate only once over the collection and that would be efficient.
In the collect and removeAll approach the disadvantage is that we have to iterate twice. First we iterate in the foor-loop looking for an object that matches our removal criteria, and once we have found it, we ask to remove it from the original collection, which would imply a second iteration work to look for this item in order to remove it.
I think it is worth mentioning that the remove method of the Iterator interface is marked as "optional" in Javadocs, which means that there could be Iterator implementations that throw UnsupportedOperationException if we invoke the remove method. As such, I'd say this approach is less safe than others if we cannot guarantee the iterator support for removal of elements.

Old Timer Favorite (it still works):
List<String> list;
for(int i = list.size() - 1; i >= 0; --i)
{
if(list.get(i).contains("bad"))
{
list.remove(i);
}
}
Benefits:
It only iterates over the list once
No extra objects created, or other unneeded complexity
No problems with trying to use the index of a removed item, because... well, think about it!

In Java 8, there is another approach. Collection#removeIf
eg:
List<Integer> list = new ArrayList<>();
list.add(1);
list.add(2);
list.add(3);
list.removeIf(i -> i > 2);

Are there any reasons to prefer one approach over the other
The first approach will work, but has the obvious overhead of copying the list.
The second approach will not work because many containers don't permit modification during iteration. This includes ArrayList.
If the only modification is to remove the current element, you can make the second approach work by using itr.remove() (that is, use the iterator's remove() method, not the container's). This would be my preferred method for iterators that support remove().

Only second approach will work. You can modify collection during iteration using iterator.remove() only. All other attempts will cause ConcurrentModificationException.

You can't do the second, because even if you use the remove() method on Iterator, you'll get an Exception thrown.
Personally, I would prefer the first for all Collection instances, despite the additional overheard of creating the new Collection, I find it less prone to error during edit by other developers. On some Collection implementations, the Iterator remove() is supported, on other it isn't. You can read more in the docs for Iterator.
The third alternative, is to create a new Collection, iterate over the original, and add all the members of the first Collection to the second Collection that are not up for deletion. Depending on the size of the Collection and the number of deletes, this could significantly save on memory, when compared to the first approach.

I would choose the second as you don't have to do a copy of the memory and the Iterator works faster. So you save memory and time.

You can see this sample; If we think remove odd value from a list:
public static void main(String[] args) {
Predicate<Integer> isOdd = v -> v % 2 == 0;
List<Integer> listArr = Arrays.asList(5, 7, 90, 11, 55, 60);
listArr = listArr.stream().filter(isOdd).collect(Collectors.toList());
listArr.forEach(System.out::println);
}

why not this?
for( int i = 0; i < Foo.size(); i++ )
{
if( Foo.get(i).equals( some test ) )
{
Foo.remove(i);
}
}
And if it's a map, not a list, you can use keyset()

Why do we need to use iterator on ArrayList in Java? [duplicate]

This question already has answers here:
Do we ever need to use Iterators on ArrayList?
(6 answers)
Closed 9 years ago.
I was reading the answer mentioned to the question
"Do we ever need to use Iterators on ArrayList?".
In the answer, the user stated something like this: "A big use case of iterators with ArrayLists is when you want to remove elements while iterating".
This could be achieved even using remove method of ArrayList in Java. My question is why we need iterator in ArrayList?
Consider the code:
import java.util.*;
public class ocajp66 {
public static void main(String[] args) {
ArrayList a = new ArrayList();
for (int i = 0; i < 10; i++) {
a.add(i);
}
System.out.printf("BEFORE ITERATOR\n");
for (int i = 0; i < a.size(); i++) {
System.out.printf("I:%d\n", a.get(i));
}
System.out.printf("AFTER ITERATOR\n");
Iterator i = a.iterator();
while (i.hasNext()) {
System.out.printf("I:%d\n", i.next());
}
}
}
Can anybody explain the significance of the iterator? It would be wonderful if you could explain me with code.

As you have stated iterator is used when you want to remove stuff whilst you iterate over the array contents. If you don't use an iterator but simply have a for loop and inside it use the remove method you will get exceptions because the contents of the array changes while you iterate through. e.g: you might think array size is 10 at the start of the for loop but it wont be the case once you remove stuff.. so when u reach the last loops probably there will be IndexOutofBoundsException etc.

It is clear that an ArrayList-like API could work without the iterator() method. However, an ArrayList is a Collection and the iterator() method is defined in the Collection interface ... so ArrayList has to implement it.
The point about deleting from an ArrayList is that doing it by indexing requires some thought:
for (int i = 0;
i < a.size(); // Hoist this at your peril
i++) {
if (a.get(i) == something) {
a.remove(i);
i--; // Leave this out at your peril
}
}
And it gets worse if you need to remove the list element in a method called from the loop ... 'cos the method has to then say that it has removed an element so that the caller can adjust the loop index.
A third reason why iterator is a good thing on an ArrayList is that it allows you to use Java 5's for (type var : iterable) ... syntax.
The bottom line is that you don't have to use iterators on ArrayList instances. If you don't want to, then don't.

This is an example of how it is possible to get the results you want in several different ways. This kind of redundancy is not unique to Java.
for (int i=0; i < myArray.length; i++) { ... }
This syntax was introduced in the very early versions of Java. It iterates over a usual Java array in a for { } loop. This is generally safe because Java arrays are fixed length and so "Index Out of Bounds" exceptions are not possible.
for (int i=0; i < myArrayList.size(); i++ { ... }
This syntax reflects a later release of Java, after the introduction of the Collections API which introduced ArrayList. Classes that implement the Collection interface, as already mentioned above, must implement an Iterator but you don't have to use it. This for { } loop doesn't, but the danger here is that ArrayLists are not fixed size. If it should shrink in the body of your for loop, and exception can result.
for (MyArrayType t : myArrayList) { }
This syntax was also released in a later release of Java. It is called the enhanced for loop. Any collection class that provides an Iterator by implementing the Iterable interface can take advantage of this syntax. This allows iterating over items in a collection without having to explicitly instantiate an Iterator. A favorite way to use this in a JavaFX Application is to loop through a bunch of controls to set a property to a value, eg. to reset the contents of a group of TextFields:
for (TextField tf : new TextField[] { txtf1, txtf2, txtf3, txtfa, txtfb, txtfc}) {
tf.setText("");
}
while (myCollectionIterator.hasNext()) { }
You can always explicitly instantiate an Iterator. This is safe to use when collection size is changing (from the Collection's own methods). It correct to say that the Iterator is more closely a property of the Iterable interface than a feature of the core Java language. But you can still use it as a language-like feature (in the enhanced for loop) thanks to later Java releases.
These constructs provide redundancy, but they are not identical. There are nuances of each that enable one to be particularly useful at a given time. You should use all of them.

Q: Why do we need an iterator in ArrayList?
We don't - just as you've shown in your code, you can iterate and do core operations on an ArrayList without an iterator. But it's a nice to have feature.
Q: Can anybody explain the significance of the iterator?
In addition to its design value, one I could see is its fail-fast feature. I quote this paragraph from the ArrayList documentation:
The iterators returned by this class's iterator and listIterator
methods are fail-fast: if the list is structurally modified at any
time after the iterator is created, in any way except through the
iterator's own remove or add methods, the iterator will throw a
ConcurrentModificationException. Thus, in the face of concurrent
modification, the iterator fails quickly and cleanly, rather than
risking arbitrary, non-deterministic behavior at an undetermined time
in the future.
You were looking for code, you can actually see the ArrayList's iterator implementation here: ArrayList.java.

For your question, if we use list.remove() method instead of iterator.remove() then IndexOutOfBoundsException will be thrown.
list.remove() is safe to use if you put break statement once you find specific object/index to be removed so that it will be exited from the loop without any Exception(like IndexOutOfBoundsException )
Following iterator code still can throw ConcurrentModificationException if we use iterator EVEN in synchronized environment.
List<String> empNames = new ArrayList<String>();
synchronized (empNames) {
Iterator<String> iterator = empNames.iterator();
while (iterator.hasNext()) {
iterator.next();
empNames.add("Another Name"); // throws
// ConcurrentModificationException
}
}

Calling remove in foreach loop in Java [duplicate]

This question already has answers here:
Iterating through a Collection, avoiding ConcurrentModificationException when removing objects in a loop
(31 answers)
Closed 8 years ago.
In Java, is it legal to call remove on a collection when iterating through the collection using a foreach loop? For instance:
List<String> names = ....
for (String name : names) {
// Do something
names.remove(name).
}
As an addendum, is it legal to remove items that have not been iterated over yet? For instance,
//Assume that the names list as duplicate entries
List<String> names = ....
for (String name : names) {
// Do something
while (names.remove(name));
}

To safely remove from a collection while iterating over it you should use an Iterator.
For example:
List<String> names = ....
Iterator<String> i = names.iterator();
while (i.hasNext()) {
String s = i.next(); // must be called before you can call i.remove()
// Do something
i.remove();
}
From the Java Documentation :
The iterators returned by this class's iterator and listIterator
methods are fail-fast: if the list is structurally modified at any
time after the iterator is created, in any way except through the
iterator's own remove or add methods, the iterator will throw a
ConcurrentModificationException. Thus, in the face of concurrent
modification, the iterator fails quickly and cleanly, rather than
risking arbitrary, non-deterministic behavior at an undetermined time
in the future.
Perhaps what is unclear to many novices is the fact that iterating over a list using the for/foreach constructs implicitly creates an iterator which is necessarily inaccessible. This info can be found here

You don't want to do that. It can cause undefined behavior depending on the collection. You want to use an Iterator directly. Although the for each construct is syntactic sugar and is really using an iterator, it hides it from your code so you can't access it to call Iterator.remove.
The behavior of an iterator is
unspecified if the underlying
collection is modified while the
iteration is in progress in any way
other than by calling this method.
Instead write your code:
List<String> names = ....
Iterator<String> it = names.iterator();
while (it.hasNext()) {
String name = it.next();
// Do something
it.remove();
}
Note that the code calls Iterator.remove, not List.remove.
Addendum:
Even if you are removing an element that has not been iterated over yet, you still don't want to modify the collection and then use the Iterator. It might modify the collection in a way that is surprising and affects future operations on the Iterator.

for (String name : new ArrayList<String>(names)) {
// Do something
names.remove(nameToRemove);
}
You clone the list names and iterate through the clone while you remove from the original list. A bit cleaner than the top answer.

The java design of the "enhanced for loop" was to not expose the iterator to code, but the only way to safely remove an item is to access the iterator. So in this case you have to do it old school:
for(Iterator<String> i = names.iterator(); i.hasNext();) {
String name = i.next();
//Do Something
i.remove();
}
If in the real code the enhanced for loop is really worth it, then you could add the items to a temporary collection and call removeAll on the list after the loop.
EDIT (re addendum): No, changing the list in any way outside the iterator.remove() method while iterating will cause problems. The only way around this is to use a CopyOnWriteArrayList, but that is really intended for concurrency issues.
The cheapest (in terms of lines of code) way to remove duplicates is to dump the list into a LinkedHashSet (and then back into a List if you need). This preserves insertion order while removing duplicates.

I didn't know about iterators, however here's what I was doing until today to remove elements from a list inside a loop:
List<String> names = ....
for (i=names.size()-1;i>=0;i--) {
// Do something
names.remove(i);
}
This is always working, and could be used in other languages or structs not supporting iterators.

Yes you can use the for-each loop,
To do that you have to maintain a separate list to hold removing items and then remove that list from names list using removeAll() method,
List<String> names = ....
// introduce a separate list to hold removing items
List<String> toRemove= new ArrayList<String>();
for (String name : names) {
// Do something: perform conditional checks
toRemove.add(name);
}
names.removeAll(toRemove);
// now names list holds expected values

Make sure this is not code smell. Is it possible to reverse the logic and be 'inclusive' rather than 'exclusive'?
List<String> names = ....
List<String> reducedNames = ....
for (String name : names) {
// Do something
if (conditionToIncludeMet)
reducedNames.add(name);
}
return reducedNames;
The situation that led me to this page involved old code that looped through a List using indecies to remove elements from the List. I wanted to refactor it to use the foreach style.
It looped through an entire list of elements to verify which ones the user had permission to access, and removed the ones that didn't have permission from the list.
List<Service> services = ...
for (int i=0; i<services.size(); i++) {
if (!isServicePermitted(user, services.get(i)))
services.remove(i);
}
To reverse this and not use the remove:
List<Service> services = ...
List<Service> permittedServices = ...
for (Service service:services) {
if (isServicePermitted(user, service))
permittedServices.add(service);
}
return permittedServices;
When would "remove" be preferred? One consideration is if gien a large list or expensive "add", combined with only a few removed compared to the list size. It might be more efficient to only do a few removes rather than a great many adds. But in my case the situation did not merit such an optimization.

Those saying that you can't safely remove an item from a collection except through the Iterator aren't quite correct, you can do it safely using one of the concurrent collections such as ConcurrentHashMap.

Try this 2. and change the condition to "WINTER" and you will wonder:
public static void main(String[] args) {
Season.add("Frühling");
Season.add("Sommer");
Season.add("Herbst");
Season.add("WINTER");
for (String s : Season) {
if(!s.equals("Sommer")) {
System.out.println(s);
continue;
}
Season.remove("Frühling");
}
}

It's better to use an Iterator when you want to remove element from a list
because the source code of remove is
if (numMoved > 0)
System.arraycopy(elementData, index+1, elementData, index,
numMoved);
elementData[--size] = null;
so ,if you remove an element from the list, the list will be restructure ,the other element's index will be changed, this can result something that you want to happened.

Use
.remove() of Interator or
Use
CopyOnWriteArrayList