I have the following question. Is it possible to add multiple custom HandlerMethodArgumentResolver for different paths?
For example I want to a HandlerMethodArgumentResolver that does A for /myapi/someMapping1/ and a different one that does B for /myapi/someMapping2/.
I know that a similar behavior is possible for HandlerInterceptor but I would like to know if this is available for HandlerMethodArgumentResolver too.
Actually, after some research I could not find an out of the box implementation for this approach. In fact, after some consideration my use case example that I though was needing something like this, could be made simpler (thus negating the need for something like that).
Given though, that something like this is imperative, one can actually create a concrete implementation of HandlerMethodArgumentResolver in which the request can be injected.
With this in hand, the origin of the request can be inspected with the appropriate methods and both the supportsParameter and resolveArgument can be implemented accordingly.
Given though that a single API may expose information and actions regarding a specific resource I don't see the reason why something like this may be needed.
Related
What is the possible usage of ZuulFilter.run() return value?
All the examples (for instance Spring example) return null.
The official documentation says:
Some arbitrary artifact may be returned. Current implementation ignores it.
So why to have it at all?
I've used this lib in multiple projects and I never thought to look into and stumbled upon this question so I had to look. Just tracing the code in IntelliJ, it does look like the results are pointless.
I'm on zuul-core:1.3.1:
Looking at FilterProcessor, when the routing methods are called to route based on the type, they all call runFilters(sType) which ultimately get the the return Object in question of the implementing IZuulFilter classes. The trail seems to stop here.
I then stopped to looked at their test classes and nothing seems to do anything with the return Object either nor the ZuulFilterResult that wraps it.
I then thought, ok, well maybe there is a way to pass data from one IZuulFilter to another (e.g. from pre to route) but that doesn't seem possible either since FilterProcessor.processZuulFilter(ZuulFilter) doesn't do anything with the results and just passes it back to runFilters(sType) which we know ignores it.
My next line of questioning was, "well, perhaps you can provide your own FilterProcessor implementation and swap it out and actually use the Object somewhere". But alas, it looks like that isn't the case either unless you want/need to implement a lot more even into the ZuulServlet?
Lastly, I thought, "well, maybe it's just a convention thing". But java.lang.Runnable.run() is void and javax.servlet.Filter.doFilter is also void.
So for now, my best guess is that like all of us at some point in our careers, we sometimes fall into a YAGNI situation; perhaps this is just one example.
This question is about a specific usage of a callback pattern. By callback i mean an interface from which i can define method(s) that is (are) optionnaly (= with a default set to 'do nothing', thanks Java 8) called from a lower layer in my application. My "application" is in fact a product which may have a lot of changes between client projects, so i need to separates somethings in order to reuse what won't change (technical code, integration of technologies) from the rest (model, rules).
Let's take an example :
I developped a Search Service which is based upon Apache CXF JAX-RS Search.
This service parses a FIQL query which can only handle AND/OR condition with =/</>/LIKE/... condition to create a JPA criteria query. I can't use a a condition like 'isNull'.
Using a specific interface i can define a callback that will be called when i got the criteria query from apache CXF layer in my search service and add my condition to the existing ones before the query is executed. This condition are defined on the upper layer of my searchService (RestController). This is in order to reduce code duplicate, like retuning a criteria query and finalize it in every methods where i need it. And because using #Transactional in CXF JAX-RS controller does not work well Spring proxy and CXF work (some JAX-RS annotation are ignored);
First question : does this example seems to be a good idea in terms of design ?
Now another example : i have an object which have some basic fields created from a service layer. But i want to be able to set others non-nullable fields not related to the service's process before the entity is persisted. These fields may move from a projects to another so i'd like to not have to change the signature of my service's method every time we add / remove columns. So again i'm considering using a callback pattern to be able to set within the same transaction and before object is persisted by the Service layer.
Second question : What about this example ?
Global question : Except the classic usage of callback for events : is this a pratice to use this pattern for some specific usage or is there any better way to handle it ?
If you need some code sample ask me, i'll make some (can't post my current code).
I wouldn't say that what you've described is a very specific usage of "an interface from which i can define method(s) that is (are) optionally called from a lower layer". I think that it is reasonable and also quite common solution.
Your doubts may be due to the naming. I'd rather use the term command pattern here. It seems to me that it is less confusing. Your approach also resembles the strategy pattern i.e. you provide (inject) an object which performs some calculations. Depending, on the context you inject objects that behave in a different way (for example add different conditions to a query).
To sum up callbacks/commands are not only used for events. I'd even say that events are specific usage of them. Command/callback pattern is used whenever we need to encapsulate an operation within an object and transfer/pass it somehow (by the way, in Java there is no other way to do so but for example in C++ there are pointers to methods, in C# there are delegates...).
As to your second example. I'm not sure if I understand it correctly. Why can't you simply populate all required fields of an object before calling the service?
Is it possible to load the value for the #PATH annotation from configuration (web.xml, etc) for a given class?
#Path(<value loaded from config>)
public class myRestService {
...
Independent of JAX-RS: Annotations in Java are compile time constants so they can't be changed at runtime.
I don't know your use case but possible ways to change the values of the annotations are:
Replacing variables before compilation, e.g. through a maven plugin.
Adding the #Path annotations dynamically like described here.
Using one generic ResourceClass mapped to /* which decides which subresource should be returned.
No comment if one of these approaches makes sense as I don't know why you want to change them. As the URI names a resource I don't see any reason to change it. See also: Cool URIs don't change
Update: JAX_RS_SPEC-60 requests "A Dynamic way to register JAX-RS resources (not based on annotations)".
According to JAX-RS specification (here), there is no standard way to do this, I think.
I can't for the life of me figure out how to create a new ForwardingCache. I can see how I should create a Cache but not a ForwardingCache. What (obvious class) am I missing?
EDIT: I forgot to add that I need this forwarding so my listeners can be notified on a cache put. If there is a better way to perform post-put actions then please leave a comment/answer.
What you are missing is basic difference of Map and Cache in guava terminilogies. So, in guava Cache, you either provide a way to calculate a value if that is not there or do the stuff on preload.
See here http://code.google.com/p/guava-libraries/wiki/CachesExplained#Applicability
So, I dont think that your put case will arise or can't see how is that arising?
As for creating ForwadCache. if you can still see/explain further how you can use ForwadingCache, you can basically provide a concrete implementation of ForwardingCache.SimpleForwardingCache http://docs.guava-libraries.googlecode.com/git-history/v10.0.1/javadoc/index.html?com/google/common/cache/ForwardingCache.SimpleForwardingCache.html and the override delegate method, of course use Eventbus there.
But coming back to the original question again, you can very well see that there are removalListeners but no addListener on cache.
Just thinking loud you can use EventBus in case of CacheLoader or get operation itself (your compute logic when the value is not found).
As with all the other Guava Forwarding classes, you extend either ForwardingCache or ForwardingCache.SimpleForwardingCache, overriding the methods you want to intercept. The choice of which of those two you want to use depends on whether you want to provide your backing Cache implementation at construction time or through the delegate() method.
I'm looking for something similar to the Proxy pattern or the Dynamic Proxy Classes, only that I don't want to intercept method calls before they are invoked on the real object, but rather I'd like to intercept properties that are being changed. I'd like the proxy to be able to represent multiple objects with different sets of properties. Something like the Proxy class in Action Script 3 would be fine.
Here's what I want to achieve in general:
I have a thread running with an object that manages a list of values (numbers, strings, objects) which were handed over by other threads in the program, so the class can take care of creating regular persistent snapshots on disk for the purpose of checkpointing the application. This persistor object manages a "dirty" flag that signifies whether the list of values has changed since the last checkpoint and needs to lock the list while it's busy writing it to disk.
The persistor and the other components identify a particular item via a common name, so that when recovering from a crash, the other components can first check if the persistor has their latest copy saved and continue working where they left off.
During normal operation, in order to work with the objects they handed over to the persistor, I want them to receive a reference to a proxy object that looks as if it were the original one, but whenever they change some value on it, the persistor notices and acts accordingly, for example by marking the item or the list as dirty before actually setting the real value.
Edit: Alternatively, are there generic setters (like in PHP 5) in Java, that is, a method that gets called if a property doesn't exist? Or is there a type of object that I can add properties to at runtime?
If with "properties" you mean JavaBean properties, i.e. represented bay a getter and/or a setter method, then you can use a dynamic proxy to intercept the set method.
If you mean instance variables, then no can do - not on the Java level. Perhaps something could be done by manipulations on the byte code level though.
Actually, the easiest way to do it is probably by using AspectJ and defining a set() pointcut (which will intercept the field access on the byte code level).
The design pattern you are looking for is: Differential Execution. I do believe.
How does differential execution work?
Is a question I answered that deals with this.
However, may I suggest that you use a callback instead? You will have to read about this, but the general idea is that you can implement interfaces (often called listeners) that active upon "something interesting" happening. Such as having a data structure be changed.
Obligitory links:
Wiki Differential execution
Wiki Callback
Alright, here is the answer as I see it. Differential Execution is O(N) time. This is really reasonable, but if that doesn't work for ya Callbacks will. Callbacks basically work by passing a method by parameter to your class that is changing the array. This method will take the value changed and the location of the item, pass it back by parameter to the "storage class" and change the value approipriately. So, yes, you have to back each change with a method call.
I realize now this is not what you want. What it appears that you want is a way that you can supply some kind of listener on each variable in an array that would be called when that item is changed. The listener would then change the corresponding array in your "backup" to refect this change.
Natively I can't think of a way to do this. You can, of course, create your own listeners and events, using an interface. This is basically the same idea as the callbacks, though nicer to look at.
Then there is reflection... Java has reflection, and I am positive you can write something using it to do this. However, reflection is notoriously slow. Not to mention a pain to code (in my opinion).
Hope that helps...
I don't want to intercept method calls before they are invoked on the real object, but
rather I'd like to intercept properties that are being changed
So in fact, the objects you want to monitor are no convenient beans but a resurgence of C structs. The only way that comes to my mind to do that is with the Field Access call in JVMTI.
I wanted to do the same thing myself. My solution was to use dynamic proxy wrappers using Javassist. I would generate a class that implements the same interface as the class of my target object, wrap my proxy class around original class, and delegate all method calls on proxy to the original, except setters which would also fire the PropertyChangeEvent.
Anyway I posted the full explanation and the code on my blog here:
http://clockwork-fig.blogspot.com/2010/11/javabean-property-change-listener-with.html