In the test i'm running, I need to find the first record that meets variable targetStatus in a table that can't be filtered or sorted.
I have code that can cycle through each table cell to find the right text that i need to input in to a conditional loop.
Essentially the code looks like this (variables declared earlier and base levels set):
List<WebElement> tableCells = driver.findElements(By.xpath("//td"));
int tableGet = 0;
tableGet = tableGet+5;
int rowNum = 1;
String sStatus = tableCells.get(tableGet).getText();
WebElement rowClick = tableCells.get(tableGet);
if (!sStatus.contentEquals(targetStatus)){
// Status is not the same so cycle through to the next row
tableGet = tableGet+6;
rowNum = rowNum+1;
sStatus = tableCells.get(tableGet).getText();
}else
{
rowClick.click();
// Status has matched and the row has been clicked
}
return sStatus;
I need the first part of the if to loop through the rows until the status meets and goes down the else route.
For reference, the table in question doesn't have any identifiers other than generic classes on them but has the following structure (to 4 rows):
<html>
<body>
<table
<thead>
<tr>
<th>Heading 1</th>
<th>Heading 2</th>
<th>Heading 3</th>
<th>Heading 4</th>
<th>Heading 5</th>
<th>Status</th>
</tr>
</thead>
<tbody>
<tr>
<td>Field 1</td>
<td>Field 2</td>
<td>Field 3</td>
<td>Field 4</td>
<td>Field 5</td>
<td>Deferred</td>
</tr>
<tr>
<td>Field 1</td>
<td>Field 2</td>
<td>Field 3</td>
<td>Field 4</td>
<td>Field 5</td>
<td>Draft</td>
</tr>
<tr>
<td>Field 1</td>
<td>Field 2</td>
<td>Field 3</td>
<td>Field 4</td>
<td>Field 5</td>
<td>Draft</td>
</tr>
<tr>
<td>Field 1</td>
<td>Field 2</td>
<td>Field 3</td>
<td>Field 4</td>
<td>Field 5</td>
<td>Approved</td>
</tr>
</tbody>
</body>
</html>
With XPath, you can craft a locator that finds only what you want without the loop. If I understand your scenario correctly, you want to find the first row that contains the desired Status (Draft, Approved, or Deferred) in a TD, and then click on that TD. The function below should do that.
public void SelectRecordByStatus(String status)
{
driver.findElement(By.xpath("//td[.='" + status + "']")).click();
}
and you call it like
SelectRecordByStatus("Approved");
Your 'while' loop should have the condition where it loops until all the rows are exhausted, and then check for each iteration if the 'if' condition is met.
while(loop until rows are exhausted){
if(!sStatus.contentEquals(targetStatus)){
tableGet = tableGet+6;
rowNum = rowNum+1;
sStatus = tableCells.get(tableGet).getText();
}
else if(sStatus.contentEquals(targetStatus)) {
rowClick.click();
}
}
I hope it works.
I'm trying to get the value from a map while iterating through a list. searchResult contains a list of Book objects and each has a list of categories.
categoryFacetCounts is a map that contains counts for each category value. The map has values for all the possible categories (I debugged and checked).
Below is my solution which prints null as the output of the map:
<table class="table table-striped" id="watchlist-table">
<thead>
<tr>
<th>Name</th>
<th>Description</th>
<th>Categories</th>
</tr>
</thead>
<tbody>
<tr th:each="book : ${searchResult}">
<td th:text="${book.name}"></td>
<td th:text="${book.description}"></td>
<td>
<span th:each="c : ${book.categories}">
<span th:text="${c} + '(' + ${categoryFacetCounts[__${c}__]} + ') '"></span>
</span>
</td>
</tr>
</tbody>
</table>
Use the get method of the map, categoryFacetCounts
<span th:each="c : ${book.categories}">
<span th:text="${c} + '(' + ${categoryFacetCounts.get(c)} + ') '"></span>
</span>
Hope this helps.
Please visit the website "http://www.cricbuzz.com/cricket-series/2223/icc-cricket-world-cup-2015/points-table"
<table class="table cb-srs-pnts">
<thead>
<tr class="cb-srs-gray-strip">
<th class="cb-col-20 cb-srs-pnts-th text-left" style="padding-left: 6px;">Pool B</th>
<td class="cb-srs-pnts-th">Mat</td>
<td class="cb-srs-pnts-th">Won</td>
<td class="cb-srs-pnts-th">Lost</td>
<td class="cb-srs-pnts-th">Tied</td>
<td class="cb-srs-pnts-th">NR</td>
<th class=" cb-srs-pnts-th">Pts</th>
<td class="cb-srs-pnts-th">NRR</td>
<th/>
</tr>
</thead>
<tbody>
</table>
I have to print all the table headings present for first table. It has a combination of "td" and "th" tags.
I am using the following xpath to retrive them.
//h3/../table[1]/thead/tr/*[self::td or self::th]
All the values are getting printed except for the text "Pool B"
Can somebody tell me why "Pool B" text is not getting selected?
Code to print the output:
driver.get("cricbuzz.com/cricket-series/2223/icc-cricket-world-cup-2015/…);
System.out.println(driver.findElement(By.xpath(" //h3/../table[1]/thead/tr/th")).getText());
List<WebElement> tableHeading = driver.findElements(By .xpath("//h3/../table[1]/thead/tr/*[self: : tdorself: : th]"));
for (int i = 1; i < tableHeading.size(); i++)
{
System.out.println(i+""+tableHeading.get(i).getText());
}
Set the index to 0 in your for loop:
for (int i = 0; i < tableHeading.size(); i++)
{
System.out.println(i+""+tableHeading.get(i).getText());
}
<table id="tblListViewHeader" class="adminlist" cellspacing="1" cellpadding="0" style="table-layout: fixed; width: 1003px;">
<tbody>
</table>
</td>
</tr>
<tr>
<td>
<div id="divListView" style="width: 100%; height: 300px; overflow: auto; display: block;">
<table id="tblListView" class="adminlist" cellspacing="1" cellpadding="0" style="table-layout: fixed; width: 100%;">
<tbody data-bind="template: { name: 'ActiveGradeTemplate', foreach: ActiveGrade }">
<tr class="row0">
<td data-bind="text:$index()+1" style="width: 5%;">1</td>
<td data-bind="text: GradeName" style="width: 20%;">Vantage Point</td>
<td align="right" data-bind="text: DisplayCreatedDate" style="width: 10%;">27 Mar 2013</td>
<td align="right" data-bind="text: CreatedByUser" style="width: 10%;">Name</td>
<td align="right" data-bind="text: DisplayModifiedDate" style="width: 10%;">27 Mar 2013</td>
<td align="right" data-bind="text: ModifiedByUser" style="width: 10%;">Name</td>
<td align="center" data-bind="text: Status" style="width: 5%;">Active</td>
<td align="center" style="width: 10%;">
<a id="lnkEdit_7" data-bind="click: $root.lnkEdit, attr:{'id':'lnkEdit_' + GradeID}" href="#">Edit</a>
<span id="spanEdit_7" data-bind="attr:{'id':'spanEdit_' + GradeID}"></span>
</td>
</tr>
<tr class="row0">
<td data-bind="text:$index()+1" style="width: 5%;">2</td>
<td data-bind="text: GradeName" style="width: 20%;">test grade</td>
<td align="right" data-bind="text: DisplayCreatedDate" style="width: 10%;">Yesterday</td>
<td align="right" data-bind="text: CreatedByUser" style="width: 10%;">Name</td>
<td align="right" data-bind="text: DisplayModifiedDate" style="width: 10%;">Yesterday</td>
<td align="right" data-bind="text: ModifiedByUser" style="width: 10%;">Name</td>
<td align="center" data-bind="text: Status" style="width: 5%;">Active</td>
<td align="center" style="width: 10%;">
<a id="lnkEdit_11" data-bind="click: $root.lnkEdit, attr:{'id':'lnkEdit_' + GradeID}" href="#">Edit</a>
<span id="spanEdit_11" data-bind="attr:{'id':'spanEdit_' + GradeID}"></span>
</td>
</tr>
How can I retrieve the td values for each and every row, this is for Dynamic generation. All the tr class names are the same: <tr class="row0">. How do I retreive the table data for the above formatted table?
Try below code, this will print all cells data,
// Grab the table
WebElement table = driver.findElement(By.id("divListView"));
// Now get all the TR elements from the table
List<WebElement> allRows = table.findElements(By.tagName("tr"));
// And iterate over them, getting the cells
for (WebElement row : allRows) {
List<WebElement> cells = row.findElements(By.tagName("td"));
// Print the contents of each cell
for (WebElement cell : cells) {
System.out.println(cell.getText());
}
}
// Grab the table
WebElement table = driver.findElement(By.id("table-6"));
//Get number of rows in table
int numOfRow = table.findElements(By.tagName("tr")).size();
//Get number of columns In table.
int numOfCol = driver.findElements(By.xpath("//*[#id='table-6']/tbody/tr[1]/td")).size();
//divided Xpath In three parts to pass Row_count and Col_count values.
String first_part = "//*[#id='table-6']/tbody/tr[";
String second_part = "]/td[";
String third_part = "]";
//take the second column values
int j=2;
//List to store the second column
List<String> secondColumnList=new ArrayList<String>();
//Loop through the rows and get the second column and put it in a list
for (int i=1; i<=numOfRow; i++){
//Prepared final xpath of specific cell as per values of i and j.
String final_xpath = first_part+i+second_part+j+third_part;
//Will retrieve value from located cell and print It.
String test_name = driver.findElement(By.xpath(final_xpath)).getText();
secondColumnList.add(test_name);
System.out.println(test_name);
}
Dynamic table data capturing:
1.First of all Capture Table Head Count.
[int tHeadCount = driver.findElements(By.xpath("//table//tr//th")).size();]
2.Capture Table Row Count in which row your actual data exists.
[-in my point of view i need data from first row it self, so i am hard coding it to zero.]
If you want please add one for loop to existing code.
3.The actual solution starts from here.
Following is function call "Deposited By" is table heading text of corresponding table data.
String tableDataValue = managePackageTableData("Deposited By");
public String managePackageTableData(String columnName) {
//In Following line i am capturing table contains how many headers.
int tHeadCount = driver.findElements(By.xpath("//table//tr//th")).size();
int statusIndex = 0;
for(int i=0;i<tHeadCount-1;i++)
{
String theadValue = driver.findElements(By.className("table")).get(0).findElements(By.tagName("tr")).get(0).findElements(By.tagName("th")).get(i).getText();
if(theadValue.equalsIgnoreCase(columnName))
{
statusIndex = i;
break;
}
}
String tableData = driver.findElements(By.tagName("tbody")).get(0).findElements(By.tagName("tr")).get(0).findElements(By.tagName("td")).get(statusIndex).getText();
return tableData;
}
You have many options, but there's mine.
You catch all tds into a list.
List<WebElement> tdlist = driver.findElements(By.cssSelector("table[id='divListView'] tr td"));
and if you want to have the value, you can use a loop.
for(WebElement el: tdlist) {
Systeme.out.println(el.getText());
}
Check out this
Most common Challenge Automation tester face during iterating through Table and list. they often want to find some value from the table cell or list and want to perform action on the same value or find corresponding other element in the same block and perform action on it.
http://qeworks.com/iterate-table-lists-selenium-webdriver/
I have done this code using TestComplete and have replicated it now with Selenium C#, I have learnt this hard way but will work for any table control and you don't have to hardcode any xpath elements in it. Also if you have a nested table control within a td like for example where you have a nested table structure where your data is interpreted like below(happens in complex tables when you use developer express grids or angular grid controls).This case if you see the td tag again has a nested table structure which again has duplicate data. You can either capture such data or leave it depending on the case using the code which I am giving below.
Html
<table>
<tr>
<td>Account #
<table>
<tr>
<td>
Account #
</td>
</tr>
</table>
</td>
<td>Name
<table>
<tr>
<td>
Name
</td>
</tr>
</table>
</td>
</tr>
<tr>
<td>1234
<table>
<tr>
<td>
1234
</td>
</tr>
</table>
</td>
<td>Bharat
<table>
<tr>
<td>
Bharat
</td>
</tr>
</table>
</td>
</tr>
</table>
Code
public List<TableDataCollection> StoreHtmlTableToList(IWebElement tblObj)
{
DataTable dataTbl = new DataTable();
int rowIndex = 1;
try
{
_tblDataCollection = new List<TableDataCollection>();
var tblRows = ((IJavaScriptExecutor)DriverContext.Driver).ExecuteScript("return arguments[0].rows; ", tblObj);
if (tblRows != null)
{
//Iterate through each row of the table
foreach (IWebElement tr in (IEnumerable)tblRows)
{
int colIndx = 1;
// Iterate through each cell of the table row
var tblCols = ((IJavaScriptExecutor)DriverContext.Driver).ExecuteScript("return arguments[0].cells; ", tr);
foreach (IWebElement td in (IEnumerable)tblCols)
{
//loop through any child or nested table structures if you want using the same approach
//Write Table to List : This part is not done yet
//Print the values
Console.WriteLine("Row[" + rowIndex.ToString() + "] Col[" + colIndx.ToString() + "] : " + td.Text);
colIndx++;
}
rowIndex++;
}
}
}
catch (Exception)
{
throw;
}
return _tblDataCollection;
}
# Ripon Al Wasim
The below code will helps you to find values column by column
WebElement customtable = t.driver.findElement(By.cssSelector("div.custom-table"));
List<WebElement> r = customtable.findElements(By.tagName("tr"));
for (WebElement row : r) {
List<WebElement> d = row.findElements(By.tagName("td"));
for(int i = 0; i<d.size(); i++) {
if(i==0) {
WebElement x =d.get(i);
JavascriptExecutor js = (JavascriptExecutor) t.driver;
js.executeScript("arguments[0].scrollIntoView();", x);
System.out.println(i+"."+d.get(i).getText()+"\n");
if(d.get(i).getText().contains(searchtext)) {
System.out.println(i+".yes\n");
}
else
{
System.out.println("No\n");
}
}
}
}
its working for me.
//tbody/tr
this will give you the total no of row-
//tbody/tr/td
this will give you all the cell for the above rows and you can iterate it based on your requiredment.
Below are different approach we can follow to handle dynamic data in application [Its not for dynamic elements];
Using excel approach;
a. Get the web-element of the field
b. Get its text .
c. Store the data in the excel and validate with actual result pattern.
Note : There are multiple data validation options in excel like compare columns, get duplicate etc..
Using collection;
a. Get the web-element of the field.
b. Get its data inside the collection [List, set, map etc]
c. Write the java code to compare the pattern of the application data.
i. Pattern can be data type, data length, data range ,Decimal places of amount field or other ,currency type, date and time pattern etc.
ii. You can write the java conditions to verify the values of charts/graphs/dashboard if you are using in your application.
d. Compare the actual data pattern[from the collection] and the expected data pattern[From the java code]
Use JDBC API to handle it through the database where you can check the actual data by using different commands.
I have html page that extract the information from:
table class="students">
<tbody>
<tr class="rz" style="color:red;" onclick="location.href='//andy.pvt.com';">
<td>
<a title="Display Andy website,Andy" href="//andy.pvt.com">15</a>
</td>
<td>Andy jr</td>
<td align="right">44.31</td>
<td align="right">23.79</td>
<td align="right">57</td>
<td align="right">1,164,700</td>
<td align="right">0.12</td>
<td align="center">
<td align="left">0.99</td>
<td align="right">
</tr>
=
I want to get Andy, 15 andy.pvt.lom.
I am able to extract this table using doc.select(table).get
I am not able to extract the information I am looking.
how to get the "tables.select("xxxx");"
can you please help me with the xxx what I am missing?
You state:
I tried ; tables = doc.select("table").get(0); than tables.select("a title).
You want something more along the lines of
tables.select("a[href]").attr("href"); // to get your String
and
tables.select("a[href]").text(); // to get your number
e.g.,
Elements tables = doc.select("table");
String hrefAttr = tables.select("a[href]").attr("href");
System.out.println("href attribute: " + hrefAttr);
String number = tables.select("a[href]").text();
System.out.println("number: " + number);