Is it possible to close the context from an ApplicationListener?
public class MyListener implements ApplicationListener<ContextRefreshedEvent> {
#Override
public void onApplicationEvent(ContextRefreshedEvent event) {
// on some certain condition we want to shutdown spring ie close the context
((ConfigurableApplicationContext)event.getApplicationContext()).close();
}
}
The problem is that Spring still wants to finish the startup process here:
public static void main(String[] args) {
SpringApplication.run(MyApplication.class, args);
}
And therefore throws an IllegalStateException:
java.lang.IllegalStateException:
org.springframework.boot.web.servlet.context.AnnotationConfigServletWebServerApplicationContext#dcb84c98
has been closed already
It seems likely that the question you actually wanted to ask is "How do I interrupt Spring-Boot startup".
Throw an exception from your onApplicationEvent method.
Its seems that you want to interrupt Spring on startup.
Simple you will not able to do that with out getting error.
If you will still like to kill your application while startup just use:
System.exit(0);
But if you want to close the context after the initial you can listen to a different Spring event called ApplicationReadyEvent
#Component
public class MyListener {
#EventListener
public void onApplicationEvent(ApplicationReadyEvent event) throws Exception {
event.getApplicationContext().close();
}
}
ApplicationReadyEvent - Event published as late as conceivably possible to indicate that the application is
* ready to service requests
Related
I want to run code after my spring-boot app starts to monitor a directory for changes.
I have tried running a new thread but the #Autowired services have not been set at that point.
I have been able to find ApplicationPreparedEvent, which fires before the #Autowired annotations are set. Ideally I would like the event to fire once the application is ready to process http requests.
Is there a better event to use, or a better way of running code after the application is live in spring-boot?
It is as simple as this:
#EventListener(ApplicationReadyEvent.class)
public void doSomethingAfterStartup() {
System.out.println("hello world, I have just started up");
}
Tested on version 1.5.1.RELEASE
Try:
#Configuration
#EnableAutoConfiguration
#ComponentScan
public class Application extends SpringBootServletInitializer {
#SuppressWarnings("resource")
public static void main(final String[] args) {
ConfigurableApplicationContext context = SpringApplication.run(Application.class, args);
context.getBean(Table.class).fillWithTestdata(); // <-- here
}
}
Have you tried ApplicationReadyEvent?
#Component
public class ApplicationStartup
implements ApplicationListener<ApplicationReadyEvent> {
/**
* This event is executed as late as conceivably possible to indicate that
* the application is ready to service requests.
*/
#Override
public void onApplicationEvent(final ApplicationReadyEvent event) {
// here your code ...
return;
}
}
Code from: http://blog.netgloo.com/2014/11/13/run-code-at-spring-boot-startup/
This is what the documentation mentions about the startup events:
...
Application events are sent in the following order, as your application runs:
An ApplicationStartedEvent is sent at the start of a run, but before
any processing except the registration of listeners and initializers.
An ApplicationEnvironmentPreparedEvent is sent when the Environment to be used in the context is known, but before the context
is created.
An ApplicationPreparedEvent is sent just before the refresh is started, but after bean definitions have been loaded.
An ApplicationReadyEvent is sent after the refresh and any related callbacks have been processed to indicate the application is ready to
service requests.
An ApplicationFailedEvent is sent if there is an exception on startup.
...
Why not just create a bean that starts your monitor on initialization, something like:
#Component
public class Monitor {
#Autowired private SomeService service
#PostConstruct
public void init(){
// start your monitoring in here
}
}
the init method will not be called until any autowiring is done for the bean.
The "Spring Boot" way is to use a CommandLineRunner. Just add beans of that type and you are good to go. In Spring 4.1 (Boot 1.2) there is also a SmartInitializingBean which gets a callback after everything has initialized. And there is SmartLifecycle (from Spring 3).
ApplicationReadyEvent is really only useful if the task you want to perform is not a requirement for correct server operation. Starting an async task to monitor something for changes is a good example.
If, however your server is in a 'not ready' state until the task is completed then it's better to implement SmartInitializingSingleton because you'll get the callback before your REST port has been opened and your server is open for business.
Don't be tempted to use #PostConstruct for tasks that should only happen once ever. You'll get a rude surprise when you notice it being called multiple times...
You can extend a class using ApplicationRunner , override the run() method and add the code there.
import org.springframework.boot.ApplicationRunner;
#Component
public class ServerInitializer implements ApplicationRunner {
#Override
public void run(ApplicationArguments applicationArguments) throws Exception {
//code goes here
}
}
Use a SmartInitializingSingleton bean in spring > 4.1
#Bean
public SmartInitializingSingleton importProcessor() {
return () -> {
doStuff();
};
}
As alternative a CommandLineRunner bean can be implemented or annotating a bean method with #PostConstruct.
Best way to execute block of code after Spring Boot application started is using PostConstruct annotation.Or also you can use command line runner for the same.
1. Using PostConstruct annotation
#Configuration
public class InitialDataConfiguration {
#PostConstruct
public void postConstruct() {
System.out.println("Started after Spring boot application !");
}
}
2. Using command line runner bean
#Configuration
public class InitialDataConfiguration {
#Bean
CommandLineRunner runner() {
return args -> {
System.out.println("CommandLineRunner running in the UnsplashApplication class...");
};
}
}
Providing an example for Dave Syer answer, which worked like a charm:
#Component
public class CommandLineAppStartupRunner implements CommandLineRunner {
private static final Logger logger = LoggerFactory.getLogger(CommandLineAppStartupRunner.class);
#Override
public void run(String...args) throws Exception {
logger.info("Application started with command-line arguments: {} . \n To kill this application, press Ctrl + C.", Arrays.toString(args));
}
}
I really like the suggestion for usage of the EventListener annotation by #cahen (https://stackoverflow.com/a/44923402/9122660) since it is very clean. Unfortunately I could not get this to work in a Spring + Kotlin setup. What does work for Kotlin is adding the class as a method parameter:
#EventListener
fun doSomethingAfterStartup(event: ApplicationReadyEvent) {
System.out.println("hello world, I have just started up");
}
You have several choices:
Using CommandLineRunner or ApplicationRunner as a Bean definition:
Spring Boot executes these towards the end of the application startup process. In most circumstances, the CommandLineRunner will do the job. Following is an example of a CommandLineRunner implementation with Java 8:
#Bean
public CommandLineRunner commandLineRunner() {
return (args) -> System.out.println("Hello World");
}
Note that the args is the String array of arguments. You can also provide an implementation of this interface and define it as a Spring Component:
#Component
public class MyCommandLineRunner implements CommandLineRunner {
#Override
public void run(String... args) throws Exception {
System.out.println("Hello World");
}
}
You can use the ApplicationRunner if you need better argument management. ApplicationRunner takes an ApplicationArguments instance that has enhanced argument management options.
You can also order the CommandLineRunner and ApplicationRunner beans using Spring's #Order annotation:
#Bean
#Order(1)
public CommandLineRunner commandLineRunner() {
return (args) -> System.out.println("Hello World, Order 1");
}
#Bean
#Order(2)
public CommandLineRunner commandLineRunner() {
return (args) -> System.out.println("Hello World, Order 2");
}
Using Spring Boot's ContextRefreshedEvent:
Spring Boot publishes several events at startup. These events indicate the completion of a phase in the application startup process. You can listen to the ContextRefreshedEvent and execute custom code:
#EventListener(ContextRefreshedEvent.class)
public void execute() {
if(alreadyDone) {
return;
}
System.out.println("hello world");
}
ContextRefreshedEvent is published several times. Thus, ensure to put a check whether the code execution is already finished.
Try this one and it will run your code when the application context has fully started.
#Component
public class OnStartServer implements ApplicationListener<ContextRefreshedEvent> {
#Override
public void onApplicationEvent(ContextRefreshedEvent arg0) {
// EXECUTE YOUR CODE HERE
}
}
Spring boot provides an ApplicationRunner interface with a run() method to be invoked at application startup.
However, instead of raw String arguments passed to the callback method, we have an instance of the ApplicationArguments class.
#Component
public class AppStartupRunner implements ApplicationRunner {
#Override
public void run(ApplicationArguments args) throws Exception {
//some logic here
}
}
just implement CommandLineRunner for spring boot application.
You need to implement run method,
public classs SpringBootApplication implements CommandLineRunner{
#Override
public void run(String... arg0) throws Exception {
// write your logic here
}
}
you can use #Component
#RequiredArgsConstructor
#Component
#Slf4j
public class BeerLoader implements CommandLineRunner {
//declare
#Override
public void run(String... args) throws Exception {
//some code here
}
If you mean running peace of code once after the application started, you can use the CommandLineRunner as below:
#SpringBootApplication
public class SpringBootApplication
implements CommandLineRunner {
private static Logger LOG = LoggerFactory
.getLogger(SpringBootConsoleApplication.class);
public static void main(String[] args) {
LOG.info("STARTING THE APPLICATION");
SpringApplication.run(SpringBootConsoleApplication.class, args);
LOG.info("APPLICATION FINISHED");
}
#Override
public void run(String... args) {
// enter code you want to run after app loaded here
LOG.info("EXECUTING : command line runner");
for (int i = 0; i < args.length; ++i) {
LOG.info("args[{}]: {}", i, args[i]);
}
}
}
Otherwise, you can use the DevTools dependency, which help you to run new codes without manually restarting the application.
<dependencies>
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-devtools</artifactId>
</dependency>
</dependencies>
don't forget to add these codes to your pom.xml to avoid version warnings:
<properties>
<java.version>17</java.version>
<spring-cloud.version>2021.0.3</spring-cloud.version>
</properties>
<dependencies>
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-dependencies</artifactId>
<version>${spring-cloud.version}</version>
<type>pom</type>
<scope>import</scope>
</dependency>
</dependencies>
give it a thump up if this was helpful to you!
Best way you use CommandLineRunner or ApplicationRunner
The only difference between is run() method
CommandLineRunner accepts array of string and ApplicationRunner accepts ApplicationArugument.
How can I programmatically shutdown a Spring Boot application without terminating the VM?
In other works, what is the opposite of
new SpringApplication(Main.class).run(args);
Closing a SpringApplication basically means closing the underlying ApplicationContext. The SpringApplication#run(String...) method gives you that ApplicationContext as a ConfigurableApplicationContext. You can then close() it yourself.
For example,
#SpringBootApplication
public class Example {
public static void main(String[] args) {
ConfigurableApplicationContext ctx = SpringApplication.run(Example.class, args);
// ...determine it's time to shut down...
ctx.close();
}
}
Alternatively, you can use the static SpringApplication.exit(ApplicationContext, ExitCodeGenerator...) helper method to do it for you. For example,
#SpringBootApplication
public class Example {
public static void main(String[] args) {
ConfigurableApplicationContext ctx = SpringApplication.run(Example.class, args);
// ...determine it's time to stop...
int exitCode = SpringApplication.exit(ctx, new ExitCodeGenerator() {
#Override
public int getExitCode() {
// no errors
return 0;
}
});
// or shortened to
// int exitCode = SpringApplication.exit(ctx, () -> 0);
System.exit(exitCode);
}
}
The simplest way would be to inject the following object where you need to initiate the shutdown
ShutdownManager.java
import org.springframework.context.ApplicationContext;
import org.springframework.boot.SpringApplication;
#Component
class ShutdownManager {
#Autowired
private ApplicationContext appContext;
/*
* Invoke with `0` to indicate no error or different code to indicate
* abnormal exit. es: shutdownManager.initiateShutdown(0);
**/
public void initiateShutdown(int returnCode){
SpringApplication.exit(appContext, () -> returnCode);
}
}
This works, even done is printed.
SpringApplication.run(MyApplication.class, args).close();
System.out.println("done");
So adding .close() after run()
Explanation:
public ConfigurableApplicationContext run(String... args)
Run the Spring application, creating and refreshing a new
ApplicationContext. Parameters:
args - the application arguments (usually passed from a Java main
method)
Returns:
a running ApplicationContext
and:
void close() Close this application context, releasing all resources
and locks that the implementation might hold. This includes destroying
all cached singleton beans. Note: Does not invoke close on a parent
context; parent contexts have their own, independent lifecycle.
This method can be called multiple times without side effects:
Subsequent close calls on an already closed context will be ignored.
So basically, it will not close the parent context, that's why the VM doesn't quit.
This will make sure that the SpringBoot application is closed properly and the resources are released back to the operating system,
#Autowired
private ApplicationContext context;
#GetMapping("/shutdown-app")
public void shutdownApp() {
int exitCode = SpringApplication.exit(context, (ExitCodeGenerator) () -> 0);
System.exit(exitCode);
}
In the application you can use SpringApplication. This has a static exit() method that takes two arguments: the ApplicationContext and an ExitCodeGenerator:
i.e. you can declare this method:
#Autowired
public void shutDown(ExecutorServiceExitCodeGenerator exitCodeGenerator) {
SpringApplication.exit(applicationContext, exitCodeGenerator);
}
Inside the Integration tests you can achieved it by adding #DirtiesContext annotation at class level:
#DirtiesContext(classMode=ClassMode.AFTER_CLASS) - The associated ApplicationContext will be marked as dirty after the test class.
#DirtiesContext(classMode=ClassMode.AFTER_EACH_TEST_METHOD) - The associated ApplicationContext will be marked as dirty after each test method in the class.
i.e.
#RunWith(SpringJUnit4ClassRunner.class)
#SpringBootTest(classes = {Application.class},
webEnvironment= SpringBootTest.WebEnvironment.DEFINED_PORT, properties = {"server.port:0"})
#DirtiesContext(classMode= DirtiesContext.ClassMode.AFTER_CLASS)
public class ApplicationIT {
...
After thinking about how to run an infinite task in Spring Boot (see my previous question), I decided to do this:
#Component
#EnableAsync
public class MyRunner implements CommandLineRunner {
#Autowired
private ScheduledExecutorService scheduledExecutorService;
#Async
#Override
public void run(String... args) throws Exception {
try {
infiniteLoop();
} finally {
this.scheduledExecutorService.shutdown();
}
}
}
This allows the SpringApplication#run method to fully complete.
As part of the whole thing, I have declared a ScheduledExecutorService bean. My issue is that if infiniteLoop() throws an unexpected exception, the Executor will prevent the application from shunting down as it is managed externally.
Is there a better way to handle such a case? Or is this a good use of the finally block?
How can I programmatically shutdown a Spring Boot application without terminating the VM?
In other works, what is the opposite of
new SpringApplication(Main.class).run(args);
Closing a SpringApplication basically means closing the underlying ApplicationContext. The SpringApplication#run(String...) method gives you that ApplicationContext as a ConfigurableApplicationContext. You can then close() it yourself.
For example,
#SpringBootApplication
public class Example {
public static void main(String[] args) {
ConfigurableApplicationContext ctx = SpringApplication.run(Example.class, args);
// ...determine it's time to shut down...
ctx.close();
}
}
Alternatively, you can use the static SpringApplication.exit(ApplicationContext, ExitCodeGenerator...) helper method to do it for you. For example,
#SpringBootApplication
public class Example {
public static void main(String[] args) {
ConfigurableApplicationContext ctx = SpringApplication.run(Example.class, args);
// ...determine it's time to stop...
int exitCode = SpringApplication.exit(ctx, new ExitCodeGenerator() {
#Override
public int getExitCode() {
// no errors
return 0;
}
});
// or shortened to
// int exitCode = SpringApplication.exit(ctx, () -> 0);
System.exit(exitCode);
}
}
The simplest way would be to inject the following object where you need to initiate the shutdown
ShutdownManager.java
import org.springframework.context.ApplicationContext;
import org.springframework.boot.SpringApplication;
#Component
class ShutdownManager {
#Autowired
private ApplicationContext appContext;
/*
* Invoke with `0` to indicate no error or different code to indicate
* abnormal exit. es: shutdownManager.initiateShutdown(0);
**/
public void initiateShutdown(int returnCode){
SpringApplication.exit(appContext, () -> returnCode);
}
}
This works, even done is printed.
SpringApplication.run(MyApplication.class, args).close();
System.out.println("done");
So adding .close() after run()
Explanation:
public ConfigurableApplicationContext run(String... args)
Run the Spring application, creating and refreshing a new
ApplicationContext. Parameters:
args - the application arguments (usually passed from a Java main
method)
Returns:
a running ApplicationContext
and:
void close() Close this application context, releasing all resources
and locks that the implementation might hold. This includes destroying
all cached singleton beans. Note: Does not invoke close on a parent
context; parent contexts have their own, independent lifecycle.
This method can be called multiple times without side effects:
Subsequent close calls on an already closed context will be ignored.
So basically, it will not close the parent context, that's why the VM doesn't quit.
This will make sure that the SpringBoot application is closed properly and the resources are released back to the operating system,
#Autowired
private ApplicationContext context;
#GetMapping("/shutdown-app")
public void shutdownApp() {
int exitCode = SpringApplication.exit(context, (ExitCodeGenerator) () -> 0);
System.exit(exitCode);
}
In the application you can use SpringApplication. This has a static exit() method that takes two arguments: the ApplicationContext and an ExitCodeGenerator:
i.e. you can declare this method:
#Autowired
public void shutDown(ExecutorServiceExitCodeGenerator exitCodeGenerator) {
SpringApplication.exit(applicationContext, exitCodeGenerator);
}
Inside the Integration tests you can achieved it by adding #DirtiesContext annotation at class level:
#DirtiesContext(classMode=ClassMode.AFTER_CLASS) - The associated ApplicationContext will be marked as dirty after the test class.
#DirtiesContext(classMode=ClassMode.AFTER_EACH_TEST_METHOD) - The associated ApplicationContext will be marked as dirty after each test method in the class.
i.e.
#RunWith(SpringJUnit4ClassRunner.class)
#SpringBootTest(classes = {Application.class},
webEnvironment= SpringBootTest.WebEnvironment.DEFINED_PORT, properties = {"server.port:0"})
#DirtiesContext(classMode= DirtiesContext.ClassMode.AFTER_CLASS)
public class ApplicationIT {
...
I am instantiating a ScheduledExecutorService using Spring's ApplicationListener interface as follows:
#Component
public class ExecutorsStart implements ApplicationListener<ContextRefreshedEvent> {
private ScheduledExecutorService executor;
#Autowired
Scheduler scheduler;
#Override
public void onApplicationEvent(final ContextRefreshedEvent event) {
executor = Executors.newSingleThreadScheduledExecutor();
scheduler.init();
int delay = 10;
int period = 60;// repeat every 1 minutes.
executor.scheduleAtFixedRate(scheduler, delay, period, TimeUnit.SECONDS);
}
At the moment, Tomcat won't shut down cleanly when I run, ./shutdown.sh, with message:
The web application [/foo] appears to have started a thread named [pool-1-thread-1] but has failed to stop it
and this seems to be because I have not yet written code to stop the ScheduledExecutorService.
My question is: how should this be done properly in this environment?
I noticed that there exists a ContextStoppedEvent, so, I implemented a listener for it:
#Component
public class ExecutorsStop implements ApplicationListener<ContextStoppedEvent> {
#Autowired
ExecutorsStart executorsStart;
#Override
public void onApplicationEvent(final ContextStoppedEvent event) {
executorsStart.executor.shutdownNow();
}
But it seems that this event handler doesn't get called when Tomcat is shutdown.
Have I implemented this incorrectly, or am I going about this completely the wong way?
You're looking for ContextClosedEvent.
#Component
public class ExecutorsStop implements ApplicationListener<ContextClosedEvent> {
#Autowired
ExecutorsStart executorsStart;
#Override
public void onApplicationEvent(final ContextClosedEvent event) {
System.out.println("Stopped: " + event);
}
}
When the Servlet container shuts down, it calls contextDestroyed(..) on its various ServletContextListener and destroy() on its Servlet instances. The ContextLoaderListener and DispatcherServlet each call close() on their ApplicationContext.