This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 3 years ago.
Im writing code to read an integer value, maybe a float, a double, and then finally read a string. What happens is that I enter the int, press enter after which the execution should stop until I enter a string. However, as soon as I press the enter to go to a newline, I get the outout which is only the number, because execution doesnt pause for me to enter the string. Whats going on
Tried inputting number and then string, that works. Tried inputting number followed by number,that works, tried inputting several strings, that works, but i couldnt get the program to read a number and then a string.
package test;
import java.util.Scanner;
public class Trying {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
int i = scan.nextInt();
double d=scan.nextDouble();
String s=scan.nextLine();
scan.close();
System.out.println("String: \'" + s+"\'");
System.out.println("Double: " + d);
System.out.println("Int: " + i);
}
}
I dont get an output for the string
Your problem is with using Scanner.nextLine() and Scanner.nextDouble() / Scanner.nextInt() together. You should be careful when using these together, as they might result in unexpected behavior. You can read the JavaDocs of the Scanner class for more detailed information. Instead of int i = scanner.nextInt(); double d = scanner.nextDouble(), try using double d = Double.parseDouble(scanner.nextLine()) to read in a String and convert it to a double.
You need to clear buffer in scanner before accepting a string input so just write
scan.nextLine();
before
String s=scan.nextLine();
and it shall work
Related
This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 27 days ago.
I am trying to read a String and output it to the terminal, as well as a few primitives, but it does not seem to work. The code is below:
import java.util.Scanner;
public class Main {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
int i = scan.nextInt();
double d = scan.nextDouble();
String s = scan.nextLine();
scan.close();
System.out.println("String: " + s + "\n");
System.out.println("Double: " + d);
System.out.println("Int: " + i);
}
}
I have tried to find other ways to parse the string in the Scanner class, but none of them seemed to work. What I except is for the String to be properly read and outputed to the terminal, along with the few other values.
Thanks in advance.
The problem is that when you press enter (when you digit the number) you are inserting a \n character inside the buffer, so when you will call nextLine() you will read the \n (because nextLine reads the input until the \n) and you will not be able to write anything because the function returns when found the \n.
You can clean it calling scanner.nextLine() one more time
int i = scan.nextInt();
double d = scan.nextDouble();
// Remove \n from buffer
scan.nextLine();
String s = scan.nextLine();
This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 1 year ago.
Problem Statement
In this challenge, you must read an integer, a double, and a String from stdin, then print the values according to the instructions in the Output Format section below. To make the problem a little easier, a portion of the code is provided for you in the editor.
Note: We recommend completing Java Stdin and Stdout I before attempting this challenge.
Input Format
There are three lines of input:
The first line contains an integer.
The second line contains a double.
The third line contains a String.
Output Format
There are three lines of output:
On the first line, print String: followed by the unaltered String read from stdin.
On the second line, print Double: followed by the unaltered double read from stdin.
On the third line, print Int: followed by the unaltered integer read from stdin.
To make the problem easier, a portion of the code is already provided in the editor.
Note: If you use the nextLine() method immediately following the nextInt() method, recall that nextInt() reads integer tokens; because of this, the last newline character for that line of integer input is still queued in the input buffer and the next nextLine() will be reading the remainder of the integer line (which is empty).
Sample Input
42
3.1415
Welcome to HackerRank's Java tutorials!
Sample Output
String: Welcome to HackerRank's Java tutorials!
Double: 3.1415
Int: 42
import java.util.Scanner;
public class Solution {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
int i = scan.nextInt();
double d = scan.nextDouble();
//scan.nextLine();
String s = scan.nextLine();
// Write your code here.
System.out.println("String: " + s);
System.out.println("Double: " + d);
System.out.println("Int: " + i);
}
}
In the above code if i comment scan.nextLine() I couldn't read the String input in the next line. Why is it necessary to give scan.nextLine() before the actual placeholder of String s?
This is the output I got.
String:
Double: 3.1415
Int: 42
Because there is a newline character after pressing enter which is not consumed by nextInt() and it has to be consumed by scan.nextLine().
Why is nextLine() returning an empty string?
This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 4 years ago.
I was solving a problem on Hackerrank in which I have to input an integer , a double and a string and print the result using stdout.
Input
42
3.1415
Welcome to HackerRank's Java tutorials!
Output
String: Welcome to HackerRank's Java tutorials!
Double: 3.1415
Int: 42
I wrote the following code and i'm not able to pass my test cases:
import java.util.Scanner;
public class Solution {
public static void main(String[] args) {
Scanner s = new Scanner(System.in);
String ss = s.nextLine();
int i = s.nextInt();
double d = s.nextDouble();
System.out.println("String: "+ss);
System.out.println("Double: "+d);
System.out.println("Int: "+i);
}
}
is there anything wrong in the code?
The question also states that :-
Note: If you use the nextLine() method immediately following the nextInt() method, recall that nextInt() reads integer tokens; because of this, the last newline character for that line of integer input is still queued in the input buffer and the next nextLine() will be reading the remainder of the integer line (which is empty).
Following was my output:
Exception in thread "main" java.util.InputMismatchException
at java.util.Scanner.throwFor(Scanner.java:909)
at java.util.Scanner.next(Scanner.java:1530)
at java.util.Scanner.nextInt(Scanner.java:2160)
at java.util.Scanner.nextInt(Scanner.java:2119)
at Solution.main(Solution.java:8)
Can anyone please explain this ?
the trick is to add s.nextLine(); before getting the String because it will reads the remainder of the line with the number on it (with nothing after the number I suspect)
Try placing a s.nextLine(); after each nextInt() if you intend to ignore the rest of the line.
so the full code will be like :
Scanner s = new Scanner(System.in);
int i = s.nextInt();
double d = s.nextDouble();
s.nextLine();
String ss = s.nextLine(
System.out.println("String: "+ss);
System.out.println("Double: "+d);
System.out.println("Int: "+i);
This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 5 years ago.
I am not able to use nextLine method after using nextInt method.This is the note given below....
note in hacker rank:(If you use the nextLine() method immediately following the nextInt() method, recall that nextInt() reads integer tokens; because of this, the last newline character for that line of integer input is still queued in the input buffer and the next nextLine() will be reading the remainder of the integer line (which is empty).
The nextLine method is not getting skiped but it is empty.
Code:
import java.util.Scanner;
public class Solution {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
int i = scan.nextInt();
double d=scan.nextDouble();
String s=scan.nextLine();
// Write your code here.
System.out.println("String: " + s);
System.out.println("Double: " + d);
System.out.println("Int: " + i);
}
}
Output:
String:
Double: 3.1415
Int: 42
In Scanner class if we call nextLine() method after any one of the seven nextXXX() method then the nextLine() doesn’t not read values from console and cursor will not come into console it will skip that step. The nextXXX() methods are nextInt(), nextFloat(), nextByte(), nextShort(), nextDouble(), nextLong(), next().
That's because the Scanner class' nextInt() method does not consume the last newline character of your input, and thus that newline is consumed in the next call to Scanner class' nextLine().
You can fire a blank Scanner class' nextLine() call after Scanner#nextInt to consume the rest of that line including newline
int option = input.nextInt();
input.nextLine(); // Consume newline left-over
String str1 = input.nextLine();
You may try this.
public static void main(String[] args) {
Scanner sc = new Scanner(System.in);
int x = sc.nextInt();
double y = sc.nextDouble();
sc.nextLine();
String s = sc.nextLine();
System.out.println("String: " + s);
System.out.println("Double: " + y);
System.out.println("Int: " + x);
}
Yes it reads the remaining line which is empty. So while giving input pass whitespaces you will see the output, instead of printing string print it's length
When you are entering the integer for nextInt() then immediate you pres enter key and this enter key caught by nextLine(). s stores enter and that is known as whitespace so it not shows.
This question already has answers here:
Scanner is skipping nextLine() after using next() or nextFoo()?
(24 answers)
Closed 8 years ago.
I was writing my first, well second if you count hello world, program and ran into a small issue.
My code:
import java.util.*;
class test {
public static void main(String[] args) {
Scanner scan = new Scanner(System.in);
System.out.print("What is your name: ");
String name = scan.nextLine();
System.out.print("What is your favorite number: ");
int favoriteNumber = scan.nextInt();
System.out.print("What is your favorite game: ");
String game = scan.nextLine();
}
}
So it scans in name and favoriteNumber but the program ends before asking the user to enter a favorite game. Essentially the user can only enter text twice instead of three times like I would like.
Just a guess: scan.nextInt() does not consume the trailing newline character after the user presses enter. The subsequent call to scan.nextLine() then finds a newline character waiting.
Try switching out int favoriteNumber = scan.nextInt(); for String favoriteNumber = scan.nextLine(); to see if that fixes the issue. If it does, my hypothesis is correct.
If that is the case, then you should probably use Integer.parseInt to convert this string into an integer. The problem here is effectively that you really want to collect 3 lines of input, where a line is defined as "any sequence of characters ending with a newline". Your program is currently written to request a line, an int, then a line, rather than "3 lines of input, one of which contains an int".
an exception must be thrown in here scan.nextInt();
Check whether you entered a proper int