Develop Reference

Search for a general sub-string within a string in Java [duplicate]

This question already has answers here:
How to get substrings from strings [duplicate]
(4 answers)
Closed 4 years ago.
I am new to Java. I want to ask how to search for a general sub-string within a given string.
For example:-
In the string 12345.67 I want to search for the sub-string .67
And in the string 1.00 I want to search for the string .00.
I basically want to search for the string after the radical (.), provided the number of characters after radical are only 2.
According to my knowledge search for general sub-string is not possible, I thereby asked for your help.
I wish to print the input (stored in the database) , a floating point number, into Indian Currency format, i.e, comma separated.
I even looked at various previous posts but none of them seemed to help me as almost everyone of them failed to produce the requite output for decimal point

According to my knowledge search for general sub-string is not possible
So you may learn a bit more, here String substring(int beginIndex) method :
String str = "12345.67";
String res = str.substring(str.indexOf('.')); // .67
If you want to check that there is only 2 digits after . :
String str = "12345.67";
String res = str.substring(str.indexOf('.') + 1); // 67
if(res.length() == 2)
System.out.println("Good, 2 digits");
else
System.out.println("Holy sh** there isn't 2 digits);

You can use split plus the substring to achieve your objective
String test = "12345.67";
System.out.println(test.split("\\.")[1].substring(0,2));
In the split function, you can pass the regex with which you could give the separator and in a substring function with the number of characters you want to extract

Next to the answer provided from #azro you may also use regex:
String string = "12345.67";
Pattern ppattern = Pattern.compile("\\d+(\\.\\d{2})");
Matcher matcher = pattern.matcher(string);
if(matcher.matches()){
String sub = matcher.group(1);
System.out.println(sub);
}
Which prints:
.67

String str = "12345.67";
String searchString = "." + str.split("\\.")[1];
if(str.contains(searchString)){
System.out.println("The String contains the subString");
}
else{
System.out.println("The String doesn't contains the subString");
}

Deleting content of every string after first empty space

How can I delete everything after first empty space in a string which user selects? I was reading this how to remove some words from a string in java. Can this help me in my case?

You can use replaceAll with a regex \s.* which match every thing after space:
String str = "Hello java word!";
str = str.replaceAll("\\s.*", "");
output
Hello
regex demo
Like #Coffeehouse Coder mention in comment, This solution will replace every thing if the input start with space, so if you want to avoid this case, you can trim your input using string.trim() so it can remove the spaces in start and in end.

Assuming that there is no space in the beginning of the string.
Follow these steps-
Split the string at space. It will create an array.
Get the first element of that array.
Hope this helps.
str = "Example string"
String[] _arr = str.split("\\s");
String word = _arr[0];
You need to consider multiple white spaces and space in the beginning before considering the above code.
I am not native to JAVA Programming but have an idea that it has split function for string.
And the reference you cited in the question is bit complex, while you can achieve the desired thing very easily.
P.S. In future if you make a mind to get two words or three, splitting method is better (assuming you have already dealt with multiple white-spaces) else substring is better.

A simple way to do it can be:
System.out.println("Hello world!".split(" ")[0]);

// Taking 'str' as your string
// To remove the first space(s) of the string,
str = str.trim();
int index = str.indexOf(" ");
String word = str.substring(0, index);
This is just one method of many.
str = str.replaceAll("\\s+", " "); // This replaces one or more spaces with one space
String[] words = str.split("\\s");
String first = words[0];

The simplest solution in my opinion would be to just locate the index which the user wants it to be cut off at and then call the substring() method from 0 to the index they wanted. Set that = to a new string and you have the string they want.
If you want to replace the string then just set the original string = to the result of the substring() method.
Link to substring() method: https://docs.oracle.com/javase/7/docs/api/java/lang/String.html#substring(int,%20int)

There are already 5 perfectly good answers, so let me add a sixth one. Variety is the spice of life!
private static final Pattern FIRST_WORD = Pattern.compile("\\S+");
public static String firstWord(CharSequence text) {
Matcher m = FIRST_WORD.matcher(text);
return m.find() ? m.group() : "";
}
Advantages over the .split(...)[0]-type answers:
It directly does exactly what is being asked, i.e. "Find the first sequence of non-space characters." So the self-documentation is more explicit.
It is more efficient when called on multiple strings (e.g. for batch processing a large list of strings) because the regular expression is compiled only once.
It is more space-efficient because it avoids unnecessarily creating a whole array with references to each word when we only need the first.
It works without having to trim the string.
(I know this is probably too late to be of any use to the OP but I'm leaving it here as an alternative solution for future readers.)

This would be more efficient
String str = "Hello world!";
int spaceInd = str.indexOf(' ');
if(spaceInd != -1) {
str = str.substring(0, spaceInd);
}
System.out.println(String.format("[%s]", str));

Regex Java when we have specific text upto a pattern

As i haven't much worked on regex, can someone help me out in getting the answer for below thing:
(1)I want to remove a text say Element
(2)It may of may not followed by delimiter say pipe(||)
I tried below thing, but it is not working in the way i want:
String str = "String:abc||Element:abc||Value:abc"; // Sample text 1
String str1 = "String:abc||Element:abc"; // Sample text 2
System.out.println(str.replaceFirst("Element.*\\||", ""));
System.out.println(str1.replaceFirst("Element.*\\||", ""));
Required output in above cases:
String:abc||Value:abc //for the first case
String:abc //for the second case

Assuming that you can decide to give another value to the original pattern which is Element in this case, you can use Pattern.quote to escape it as below:
String str = "String:abc||Element:abc||Value:abc"; // Sample text 1
String str1 = "String:abc||Element:abc"; // Sample text 2
String originalPattern = "Element";
String pattern = String.format("\\|{2}%s[^\\|]+", Pattern.quote(originalPattern));
System.out.println(str.replaceFirst(pattern, ""));
System.out.println(str1.replaceFirst(pattern, ""));
Your patter is then generic and its value is String.format("\\|{2}%s[^\\|]+", Pattern.quote(originalPattern))
Output:
String:abc||Value:abc
String:abc

You put the escape wrong. It should be:
Element(.*?\|\||.*$)
Put the escape on each pipe, and use ? for non greedy Regex so you only replace just enough string, not everything.

String text = "String:abc||Element:abc||Value:abc";
text = text.replaceAll("\\belement\\b", "");
you might need to use replace all this will replace all element from your string here i am using '\b' word boundary in java regular expression in between the words

How to get the desired character from the variable sized strings?

I need to extract the desired string which attached to the word.
For example
pot-1_Sam
pot-22_Daniel
pot_444_Jack
pot_5434_Bill
I need to get the names from the above strings. i.e Sam, Daniel, Jack and Bill.
Thing is if I use substring the position keeps on changing due to the length of the number. How to achieve them using REGEX.
Update:
Some strings has 2 underscore options like
pot_US-1_Sam
pot_RUS_444_Jack

Assuming you have a standard set of above formats, It seems you need not to have any regex, you can try using lastIndexOf and substring methods.
String result = yourString.substring(yourString.lastIndexOf("_")+1, yourString.length());

Your answer is:
String[] s = new String[4];
s[0] = "pot-1_Sam";
s[1] = "pot-22_Daniel";
s[2] = "pot_444_Jack";
s[3] = "pot_5434_Bill";
ArrayList<String> result = new ArrayList<String>();
for (String value : s) {
String[] splitedArray = value.split("_");
result.add(splitedArray[splitedArray.length-1]);
}
for(String resultingValue : result){
System.out.println(resultingValue);
}

You have 2 options:
Keep using the indexOf method to get the index of the last _ (This assumes that there is no _ in the names you are after). Once that you have the last index of the _ character, you can use the substring method to get the bit you are after.
Use a regular expression. The strings you have shown essentially have the pattern where in you have numbers, followed by an underscore which is in turn followed by the word you are after. You can use a regular expression such as \\d+_ (which will match one or more digits followed by an underscore) in combination with the split method. The string you are after will be in the last array position.

Use a string tokenizer based on '_' and get the last element. No need for REGEX.
Or use the split method on the string object like so :
String[] strArray = strValue.split("_");
String lastToken = strArray[strArray.length -1];

String[] s = {
"pot-1_Sam",
"pot-22_Daniel",
"pot_444_Jack",
"pot_5434_Bill"
};
for (String e : s)
System.out.println(e.replaceAll(".*_", ""));

JAVA: Replacing words in string

I want to replace words in a string, but I am having little difficulties. Here is what I want to do. I have string:
String a = "I want to replace some words in this string";
It should work like some kind of a translator. I am doing this with String.replaceAll(), but it doesn't work completely because of this. Let's say I am translating from English to German, than this should be the output (Ich means I in German).
String toTranslate = "I";
String translated = "Ich";
a = a.replaceAll(toTranslate.toLowerCase(), translated.toLowerCase());
Now the output of the String a will be this:
"ich want to replace some words ich**n** **th**ich**s** **str**ich**ng**"
How to replace just the words, not the subwords in the words?

replaceAll uses regex, so you may add word boundaries or look-around mechanisms to check if there are no non-space characters surrounding word you want to replace.
String toTranslate = "I";
String translated = "Ich";
a = a.replaceAll("(?<!\\S)"+toTranslate.toLowerCase()+"(?!\\S)", translated.toLowerCase());
You can also add quotation mechanism to escape any regex metacharacters like + * ( inside word you want to replace. BTW you don't need to change your string to lower case, simply add case-insensitive flag to regex (?i).
a = a.replaceAll("(?i)(?<!\\S)"+Pattern.quote(toTranslate)+"(?!\\S)", translated.toLowerCase());

Use split(" ") for getting each word in the sentence. And then use replaceAll on each word.
String a = "I want to replace some words in this string";
String toTranslate = "I";
String translated = "Ich";
String newString[]=a.split(" ");
for (String string : newString) {
string=string.replaceAll(toTranslate, toTranslate.toLowerCase());//Adding this line ensures you dont miss any uppercase toTranslate
string=string.replaceAll(toTranslate.toLowerCase(), translated.toLowerCase());
System.out.println("after translation ="+string);
}

String toTranslate = "I ";
String translated = "Ich ";
a = a.replaceAll(toTranslate.toLowerCase(), translated.toLowerCase());
If you add a space after the "I" it should replace it when it comes to the word "Ich" but if your word ends in a "I" then thats another problem

If you assume that I will always be capitalized in English as it should be then
a = a.replaceAll(toTranslate, translated);
will work, otherwise you need to replace both cases
a = a.replaceAll(toTranslate, translated);
a = a.replaceAll("([^a-zA-Z])("+toTranslate.toLowerCase()+")([^a-zA-Z])", "$1"+translated.toLowerCase()+"$3");
Here is a working example

Yes, the word boundaries are the solution. I just did this in the regex:
text.replaceAll("\\b" + parts1[i] + "\\b", map.element.value);
Don't be confused with the second argument it's string (from Hash table).

You can use RegEx's word bound, which is \b
String toTranslate = "\\bI\\b";
String translated = "Ich";
a = a.replaceAll(toTranslate.toLowerCase(), translated.toLowerCase());
This should ensure I is separated entirely into its own word
Edit: I misread the question and realized you want whole words. See above, as I have accounted for that