I wrote some Maven code in Netbeans that has approximately more than 2000 lines. When I compile it on Netbeans, everything is fine, but if I want to run it on command line, I will get these errors:
generics are not supported in -source 1.3
(use -source 5 or higher to enable generics)
ArrayList<ArrayList<Integer>> list = new ArrayList<ArrayList<Integer>>();
generics are not supported in -source 1.3
(use -source 5 or higher to enable generics)
HashSet<Double> resid_List = new HashSet<Double>(Arrays.asList(resid_val));
generics are not supported in -source 1.3
(use -source 5 or higher to enable generics)
List<Integer> ind_ovlpList = new ArrayList<Integer>(Arrays.asList(ind_ovlp));
generics are not supported in -source 1.3
(use -source 5 or higher to enable generics)
public class ColumnComparator implements Comparator<double[]> {
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
#Override
I tried to use Java 1.3.1, compiler errors, but I got more errors. I found from other posts that I should modify pom.xml, but I do not know how. Here is my pom.xml
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.mycompany</groupId>
<artifactId>mavenmain</artifactId>
<version>1.0-SNAPSHOT</version>
<packaging>jar</packaging>
<name>mavenmain</name>
<url>http://maven.apache.org</url>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<dependencies>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>gov.nist.math</groupId>
<artifactId>jama</artifactId>
<version>1.0.2</version>
</dependency>
</dependencies>
</project>
It would be great if you can help me!
maven-compiler-plugin it's already present in plugins hierarchy dependency in pom.xml. Check in Effective POM.
For short you can use properties like this:
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
I'm using Maven 3.2.5.
<project>
[...]
<build>
[...]
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>(whatever version is current)</version>
<configuration>
<!-- or whatever version you use -->
<source>1.7</source>
<target>1.7</target>
</configuration>
</plugin>
</plugins>
[...]
</build>
[...]
</project>
See the config page for the maven compiler plugin:
http://maven.apache.org/plugins/maven-compiler-plugin/examples/set-compiler-source-and-target.html
Oh, and: don't use Java 1.3.x, current versions are Java 11 or 17.
Generally you don't want to value only the source version (javac -source 1.8 for example) but you want to value both the source and the target version (javac -source 1.8 -target 1.8 for example).
Note that from Java 9, you have a way to convey both information and in a more robust way for cross-compilation compatibility (javac -release 9).
Maven that wraps the javac command provides multiple ways to convey all these JVM standard options.
How to specify the JDK version?
Using maven-compiler-plugin or maven.compiler.source/maven.compiler.target properties to specify the source and the target are equivalent.
<plugins>
<plugin>
<artifactId>maven-compiler-plugin</artifactId>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
and
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
are equivalent according to the Maven documentation of the compiler plugin
since the <source> and the <target> elements in the compiler configuration use the properties maven.compiler.source and maven.compiler.target if they are defined.
source
The -source argument for the Java compiler.
Default value is: 1.6.
User property is: maven.compiler.source.
target
The -target argument for the Java compiler.
Default value is: 1.6.
User property is: maven.compiler.target.
About the default values for source and target, note that
since the 3.8.0 of the maven compiler, the default values have changed from 1.5 to 1.6.
<release> tag — new way to specify Java version in maven-compiler-plugin 3.6
You can use the release argument :
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.0</version>
<configuration>
<release>9</release>
</configuration>
</plugin>
You could also declare just the user property maven.compiler.release:
<properties>
<maven.compiler.release>9</maven.compiler.release>
</properties>
But at this time the last one will not be enough as the maven-compiler-plugin default version you use doesn't rely on a recent enough version.
The Maven release argument conveys release to the Java compiler to access the JVM standard option newly added to Java 9, JEP 247: Compile for Older Platform Versions.
Compiles against the public, supported and documented API for a
specific VM version.
This way provides a standard way to specify the same version for the source, the target and the bootstrap JVM options.
Note that specifying the bootstrap is a good practice for cross compilations and it will not hurt if you don't make cross compilations either.
Which is the best way to specify the JDK version?
Java 8 and below
Neither maven.compiler.source/maven.compiler.target properties or using the maven-compiler-plugin is better.
It changes nothing in the facts since finally the two ways rely on the same properties and the same mechanism : the maven core compiler plugin.
Well, if you don't need to specify other properties or behavior than Java versions in the compiler plugin, using this way makes more sense as this is more concise:
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
Java 9 and later
The release argument (third point) is a way to strongly consider if you want to use the same version for the source and the target.
I faced same issue in eclipse neon simple maven java project
But I add below details inside pom.xml file
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.6.1</version>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
</build>
After right click on project > maven > update project (checked force update)
Its resolve me to display error on project
Hope it's will helpful
Thansk
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.3</version>
<configuration>
<fork>true</fork>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
I am using Tycho to build an RCP application. The build runs in a Gitlab CI script on a Windows Runner. The app is setup to run at Java 8 level due to some components in one of the plugins. The runner uses OpenJDK 12. At the moment, this causes compiler errors.
How can I set the source and target compiler level for the build?
I have tried setting the following in the parent pom:
<properties>
<tycho.version>1.5.1</tycho.version>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
and also
<plugins>
<plugin>
<groupId>org.eclipse.tycho</groupId>
<artifactId>tycho-compiler-plugin</artifactId>
<version>${tycho.version}</version>
<configuration>
<compilerVersion>1.8</compilerVersion>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
but I still get compiler errors such as JAXBElement cannot be resolved to a type.
You'll have to set execution environment on the overview tab of the MANIFEST.MF file. Tycho will infer maven properties from there.
...
Bundle-RequiredExecutionEnvironment: JavaSE-1.8
...
I am trying to create web app using spring boot, maven and java 12. I started the project with spring-boot-starter-parent version 2.1.5.RELEASE, java 12 and maven-compiler-plugin version 3.8.1. I tried to run ./mvnw package but i got this error:
Fatal error compiling: invalid target release: 12
After that i wrote on the internet that maven compiler plugin uses old dependency for asm and i should specify new version of it. So i selected the latest version of asm which is 7.1 and i added configuration tag with properties release 12 and compilerArgs --enable-preview for java 12. The result was:
Fatal error compiling: invalid flag: --release
The next thing that i tried was to use spring boot starter parent version 2.2.0.M3 and to specify the repository to find milestone versions of spring from http://repo.spring.io/milestone. Unfortunately i got the same result. Any ideas?
Trying with previous versions to spring boot 2.2.0.MX it also failed for me, but I have managed to make it work with 2.2.0.M6 including some plugins and tweaking them to adapt with the preview features like:
<plugins>
<plugin>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-maven-plugin</artifactId>
<configuration>
<arguments>--enable-preview</arguments>
<jvmArguments>--enable-preview</jvmArguments>
</configuration>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.22.2</version>
<configuration>
<argLine>--enable-preview</argLine>
</configuration>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.1</version>
<configuration>
<compilerArgs>--enable-preview</compilerArgs>
</configuration>
</plugin>
</plugins>
This is now working with Java 13.
I tried building artifact in Jenkins with OpenJDK11. First I ran mvn clean install -DskipTests & build was successful.
But when I ran mvn clean install, I got following error for test classes.
<CLASS_NAME> has been compiled by a more recent version of the Java Runtime (class file version 55.0), this version of the Java Runtime only recognizes class file versions up to 52.0
org.apache.maven.surefire.booter.SurefireBooterForkException: There was an error in the forked process
<CLASS_NAME> has been compiled by a more recent version of the Java Runtime (class file version 55.0), this version of the Java Runtime only recognizes class file versions up to 52.0
pom.xml
<properties>
<java.version>11</java.version>
<maven.compiler.source>11</maven.compiler.source>
<maven.compiler.target>11</maven.compiler.target>
</properties>
<plugins>
<plugin>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.0</version>
<configuration>
<release>11</release>
<compilerId>groovy-eclipse-compiler</compilerId>
<compilerArguments>
<indy/>
<configScript>config.groovy</configScript>
</compilerArguments>
</configuration>
<dependencies>
<dependency>
<groupId>org.codehaus.groovy</groupId>
<artifactId>groovy-eclipse-compiler</artifactId>
<version>3.0.0-01</version>
</dependency>
<dependency>
<groupId>org.codehaus.groovy</groupId>
<artifactId>groovy-eclipse-batch</artifactId>
<version>2.5.5-01</version>
</dependency>
</dependencies>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-surefire-plugin</artifactId>
<version>2.22.1</version>
<configuration>
<includes>
<include>**/*Spec.*</include>
</includes>
</configuration>
</plugin>
</plugins>
Please help me in fixing this issue in Jenkins
Note: I faced similar issue in my local also. I changed JAVA_HOME in ~/.mavenrc file & the issue got resolved
This is just a version mismatch. You have compiled your code in local using Java 8 and your Jenkins has JAVA 11. Upgrade your local code to Java 11 compatible.
This is the link for your perusal.
Class has been compiled by a more recent version of the Java Environment
I am using eclipse as IDE. When I right click on the project and then click maven update my java version change to 1.5. Here is what I did so far, I followed all the steps listed here
http://qussay.com/2013/09/13/solving-dynamic-web-module-3-0-requires-java-1-6-or-newer-in-maven-projects/
I changed "Java build path" to "workspace default jre 1.8.0_25"
Then changed "java compiler" to 1.8
Then changed "project facets">java>1.8
Changed pom.xml java version to 1.8
<build>
<plugins>
<plugin>
<groupId>org.eclipse.jetty</groupId>
<artifactId>jetty-maven-plugin</artifactId>
<version>9.1.3.v20140225</version>
</plugin>
<plugin>
<groupId>org.apache.maven.plugin</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.1</version>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
</build>
After all this when I click on "Maven update" my java version change to 1.5 automatically. Also in above steps, first two step's version also change to 1.5 automatically. How can I fix this?
Open your pom.xml file and add the following lines on it:
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
</properties>
Where 1.8 is the Java version of your current JDK/JRE. Another way of doing this is adding a <build> with the maven-compile-plugin as:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.2</version> <!-- or whatever current version -->
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
</build>
If you are looking for a way to make it work with Java versions 9+ please take a look at #JDelorean's answer.
Had the same issue when I installed Java 9. My project would default to J2SE-1.5 Execution Environment. Strangely, Java 9 compliance level is not referenced like previous versions, i.e. "1.8", but as "9". So I had to provide my properties and Maven compiler plugin config accordingly:
<properties>
<maven.compiler.source>9</maven.compiler.source>
<maven.compiler.target>9</maven.compiler.target>
</properties>
and
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<configuration>
<source>9</source>
<target>9</target>
</configuration>
</plugin>
This seems to have solved the problem. Works for versions 9 and above.
The root-cause of this issue is that if for any reason Eclipse's cannot resolve a valid value for the maven.compiler.source property when generating/updating the .classpath file from the pom, it will simply default to using org.eclipse.jdt.launching.JRE_CONTAINER/org.eclipse.jdt.internal.debug.ui.launcher.StandardVMType/J2SE-1.5.
As expertly answered by #jorge-campos, there are multiple ways to set that property.
However, Jorge's answer didn't appear to work for me. Here were my settings:
<properties>
<javaVersion>1.8</javaVersion>
<maven.compiler.source>${java.version}</maven.compiler.source>
<maven.compiler.target>${java.version}</maven.compiler.target>
</properties>
...
Exactly. ${java.version} is never going to resolve to the (completely different) property javaVersion and Eclipse ignored the property and used the default.
Which brings me back to the "for any reason" part I opened with; developer stupidity can be one of those reasons.
Add this lines to your pom.xml, then right click your JRE System Library -> Properties -> Set your correct execution environment to Java 1.8 or version you want to set.
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.2</version> <!-- or whatever current version -->
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
I encounter similar issue on one of my team mate machine. He was using old version of Eclipse, I believe it he was using Keppler. Project after being updated change JRE version to 1.5.
Simple updating Eclipse to latest version solve this problem.
In my case (old JBoss Developer Studio), the issue was the JRE environments did not include 1.8 (only 1.7). When I switched the maven-compiler-plugin version to 1.7 and did maven update project, it updated the Eclipse JRE system library to 1.7.
So the solution is to either get a newer IDE version that includes a built-in JRE environment that is 1.8 or later, or try to install it manually (see https://stackoverflow.com/a/35204314)
I had this problem. In my case the <properties> tag & nested tags Jorge Campos mentions above were in the wrong place. If I put them between the <hostversion> and <dependencies> tags in the pom.xml file, then this behaviour stopped.
That can be picked up in Eclipse if validation of these files is switched on.
I am using Java 11.
This is how the complete pom.xml file looks like after adding
<properties> and <plugin>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.akshay</groupId>
<artifactId>1000SpringSecurityEg</artifactId>
<packaging>war</packaging>
<version>0.0.1-SNAPSHOT</version>
<name>1000SpringSecurityEg Maven Webapp</name>
<url>http://maven.apache.org</url>
<dependencies>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
</dependencies>
<properties>
<javaVersion>11</javaVersion>
<maven.compiler.source>${java.version}</maven.compiler.source>
<maven.compiler.target>${java.version}</maven.compiler.target>
</properties>
<build>
<finalName>1000SpringSecurityEg</finalName>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.1</version>
<configuration>
<source>11</source>
<target>11</target>
</configuration>
</plugin>
</plugins>
</build>
</project>
The above code worked for me.
Hope it works for you as well.
<properties>
<maven.compiler.source>11</maven.compiler.source>
<maven.compiler.target>11</maven.compiler.target>
</properties>
I added these lines in my "pom.xml" file and it worked.
I allow myself to update that subject with Java 11.
I have installed OpenJDK11 on my computer, and I wanted to use it in an app.
I had trouble because Eclipse would always change my JRE to JavaSE-1.5 when I updated my project with Maven.
I had set everything as you said, but I was always directly selecting in my Java Build Path "java-11-openjdk.x86_64" as one of my Alternante JRE. I fixed my problem by selecting in "Execution environment" JavaSE-10 (but you have to double click on it and then choose as a compatible JRE your OpenJDK11 version) as shown on the picture.
Execution environment setup
The project will use Java 11 thanks to that (picture) but you have to write 10 for the java-version in the pom.xml and also set java 10 on the Project Facets.
I've resolved the issue installing the eclipse update "JAVA 12" from the market.
It makes my eclipse pass from Kepler to Luna.
After that, i have been able to set 1.8 as standard JDK, fixing the "maven update" problem.
I experienced with JRE 15.0.1 one must ONLY specify the compiler plugin like
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.8.1</version>
<configuration>
<source>15</source>
<target>15</target>
</configuration>
</plugin>
If I also provide the properties like
<properties>
<maven.compiler.source>15</maven.compiler.source>
<maven.compiler.target>15</maven.compiler.target>
</properties>
this will again reset to JRE 1.5 on Maven / Update Project
!!!
Check in pom.xml under properties if there is any tag with this maven.enforcer.plugin.version. Delete it and replace that with the below code
<javaVersion>1.8</javaVersion>
<maven.compiler.source>${java.version}</maven.compiler.source>
<maven.compiler.target>${java.version}</maven.compiler.target>
under properties tag.
And under build, replace the plugins with the below code:
<build>
<finalName>1000SpringSecurityEg</finalName>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.5.1</version>
<configuration>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
</plugins>
</build>
This solution resolved my issue.
I changed Eclipse from kepler to neon and then updated my project by with Maven -> Update Project.