I am trying to add more panels to my frame, but the program seems to ignore all the other panels than the first one I added. How should I add the panels?
I have checked other people's questions and their answers, but none of them seemed to be the solution to mine.
frame = new JFrame("Hey");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel mid = new JPanel(new GridLayout(7,7));
JPanel top = new JPanel();
frame.add(top);
frame.add(mid);
frame.pack();
frame.setVisible(true);
The program ignores the "top" panel, along with the buttons I added to it.
From the JFrame documentation:
The default content pane will have a BorderLayout manager set on it.
So you should use the BorderLayout regions in order to add your JPanels to the JFrame's content pane like this:
frame.add(top, BorderLayout.NORTH);
frame.add(mid, BorderLayout.CENTER);
Otherwise, the BorderLayout will default to adding everything to the CENTER region:
As a convenience, BorderLayout interprets the absence of a string specification the same as the constant CENTER:
Panel p2 = new Panel();
p2.setLayout(new BorderLayout());
p2.add(new TextArea()); // Same as p.add(new TextArea(), BorderLayout.CENTER);
and you will only see the JPanel added last because:
Each region may contain no more than one component
Related
I recently found out that you can put a JPanel inside another JPanel, I tried it and it didn't quite do what I expected.I'm trying to have one button in the center and one button on the bottom right of the panel, I'm using a BorderLayout for all my panels.When I tried using two panels inside the center panel, the two panels were on the same line, but I've coded that one needed to be on the top and one on the bottom.Does anyone know how I could resolve this?
Sorry for not adding the code in the place, wasn't sure and I had already deleted it so I quickly made this, it is the same code I used in my project.
My code:
JFrame frame = new JFrame();
JButton btn = new JButton();
JPanel center = new JPanel();
JPanel top = new JPanel();
JPanel bot = new JPanel(new FlowLayout(FlowLayout.RIGHT));
bot.add(btn);
center.add(top, BorderLayout.PAGE_START);
center.add(bot, BorderLayout.PAGE_END);
frame.add(center, BorderLayout.CENTER);
When I use this code, "bot" is going to be displayed on the right of "top".
I think it has to do with the layout of "center" but I'm not sure.
Set the LayoutManager of center to BorderLayout, with this method:
center.setLayout(new BorderLayout());
I want to make a program with a BorderLayout where the center and the east part is graphically separated. I tried the following, but unfortunately the separator is on the left side of the JFrame and not between the centerPanel and the rightPanel.
setLayout(new BorderLayout());
JPanel centerPanel = new JPanel();
JPanel rightPanel = new JPanel();
centerPanel.add(new JLabel("center"));
rightPanel.add(new JLabel("right"));
getContentPane().add(centerPanel, BorderLayout.CENTER);
getContentPane().add(rightPanel, BorderLayout.EAST);
getContentPane().add(new JSeparator(JSeparator.VERTICAL), BorderLayout.LINE_START);
Can someone please help me out?
You can use a Nested Layout approach to give your center panel a BorderLayout and add the vertical separator to this one instead of the content pane:
JPanel centerPanel = new JPanel(new BorderLayout());
centerPanel.add(new JLabel("center"), BorderLayout.CENTER);
centerPanel.add(new JSeparator(JSeparator.VERTICAL), BorderLayout.LINE_END);
JPanel rightPanel = new JPanel();
rightPanel.add(new JLabel("right"));
getContentPane().add(centerPanel, BorderLayout.CENTER);
getContentPane().add(rightPanel, BorderLayout.LINE_END);
Other notes
1) Since Java 1.4 when using BorderLayout the use of new constants is highly encouraged:
PAGE_START
PAGE_END
LINE_START
LINE_END
CENTER
From How to Use BorderLayout tutorial (bold text mine):
Before JDK release 1.4, the preferred names for the various areas were
different, ranging from points of the compass (for example,
BorderLayout.NORTH for the top area) to wordier versions of the
constants we use in our examples. The constants our examples use are
preferred because they are standard and enable programs to adjust to
languages that have different orientations.
2) Please avoid extending Swing components if you won't add any Swing related feature. See:
Extends JFrame vs. creating it inside the the program
Java Swing: Does the phrase “favor composition over inheritance”
apply?
I am creating a custom decoration for my first customized Swing program window, I just started with layout managers, and it looks like I am doing something wrong, first I used BorderLayout and BorderLayout.EAST or WEST to display on the corner, but it only allows one panel to be displayed on a corner, like it won't display in a row.
Looks like this:
(source: gyazo.com)
With that code:
this.panel.setLayout(new BorderLayout());
this.panel.add(this.createToolButton("X"), BorderLayout.EAST);
But if I add another panel, the newest panel will be on the previous one (Note I used panels because JButton hates me, with it's default styles doesn't let me make it flat)
Now I used GridBagLayout
this.panel.setLayout(new GridBagLayout());
Box panels = new Box(BoxLayout.X_AXIS);
panels.add(this.createToolButton("X"));
this.panel.add(panels, BorderLayout.EAST);
But on run I get
Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: cannot add to layout: constraints must be a GridBagConstraint
at java.awt.GridBagLayout.addLayoutComponent(Unknown Source)
What am I doing wrong? how can I have the panels floated to right one by one?
EDIT:
this.panel.setLayout(new GridBagLayout());
GridBagConstraints gc = new GridBagConstraints();
gc.fill = GridBagConstraints.WEST;
this.panel.add(this.createToolButton("X"), gc);
Exception in thread "AWT-EventQueue-0" java.lang.IllegalArgumentException: cannot add to layout: constraints must be a GridBagConstraint
at java.awt.GridBagLayout.addLayoutComponent(Unknown Source)
Use GridBagConstraint with GridBagLayout.
this.panel.setLayout(new GridBagLayout());
GridBagConstraint gc = new GridBagConstraint();
// set different properties of GridBagConstraint as per your need
this.panel.add(panels, gc);
Read more How to Use GridBagLayout read more about properties of GridBagConstraint.
Here is The Example to learn more about it.
EDIT
You can try with FlowLayout with right alignment:
JPanel titlePanel=new JPanel(new GridLayout(1,2));
titlePanel.setBorder(new LineBorder(Color.BLACK));
titlePanel.setBackground(Color.LIGHT_GRAY);
JPanel panel = new JPanel(new FlowLayout(FlowLayout.RIGHT, 0, 0));
panel.setBackground(Color.LIGHT_GRAY);
titlePanel.add(new JLabel("Title",JLabel.LEFT));
panel.add(new JButton("X"));
titlePanel.add(panel);
frame.add(titlePanel, BorderLayout.NORTH);
// add panel in the north section of the undecorated JFrame
// that by default uses BorderLayout
snapshot:
If you are using
this.panel.add(panels, BorderLayout.EAST);
then you should use BorderLayout not GridBagLayout.
this.panel.setLayout(new BorderLayout());
You can read more in the documentation How to Use BorderLayout.
In my application, there are 4 panels. And i need to insert them into the main panel, which uses BorderLayout. The 4 panels are...
A thin Image strip.
4 buttons just below above
A TextField covering the complete page.
An about at end.
This is my code...
add(imageLabel, BorderLayout.NORTH);
add(buttonPanel,BorderLayout.PAGE_START);
add(logScrollPane, BorderLayout.CENTER);
add(about, BorderLayout.PAGE_END);
When I do this, the buttonPanel disappears. How can I achieve what I need?
I usually try to keep a maximum of 3 components in any BorderLayout, so I would do it like this...
JPanel outerPanel = new JPanel(new BorderLayout());
JPanel innerPanel= new JPanel(new BorderLayout());
innerPanel.add(buttonPanel,BorderLayout.NORTH);
innerPanel.add(logScrollPane, BorderLayout.CENTER);
innerPanel.add(about, BorderLayout.SOUTH);
outerPanel.add(imageLabel, BorderLayout.NORTH);
outerPanel.add(innerPanel,BorderLayout.CENTER);
As long as you keep the 'maximum-stretched' component in the CENTER (in this case, your logScrollPane) then it'll always work. If you want to use the panel, such as setting it on a JFrame, just use add(outerPanel).
Don't be afraid of BorderLayout - the ability of this layout to auto-expand the CENTER component to fill the available space make it a very powerful and very important LayoutManager!
I want to add two jPanels to a JFrame side by side. the two boxes are jpanels and the outer box is a jframe
I have these lines of code. I have one class called seatinPanel that extends JPanel and inside this class I have a constructor and one method called utilityButtons that return a JPanel object. I want the utilityButtons JPanel to be on the right side. the code I have here only displays the utillityButtons JPanel when it runs.
public guiCreator()
{
setTitle("Passenger Seats");
//setSize(500, 600);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container contentPane = getContentPane();
seatingPanel seatingPanel1 = new seatingPanel();//need to declare it here separately so we can add the utilityButtons
contentPane.add(seatingPanel1); //adding the seats
contentPane.add(seatingPanel1.utilityButtons());//adding the utility buttons
pack();//Causes this Window to be sized to fit the preferred size and layouts of its subcomponents
setVisible(true);
}
The most flexible LayoutManager I would recommend is BoxLayout.
You can do the following :
JPanel container = new JPanel();
container.setLayout(new BoxLayout(container, BoxLayout.X_AXIS));
JPanel panel1 = new JPanel();
JPanel panel2 = new JPanel();
//panel1.set[Preferred/Maximum/Minimum]Size()
container.add(panel1);
container.add(panel2);
then add container to object to your frame component.
You need to read up on and learn about the layout managers that Swing has to offer. In your situation it will help to know that a JFrame's contentPane uses BorderLayout by default and you can add your larger center JPanel BorderLayout.CENTER and the other JPanel BorderLayout.EAST. More can be found here: Laying out Components in a Container
Edit 1
Andrew Thompson has already shown you a bit on layout managers in his code in your previous post here: why are my buttons not showing up?. Again, please read the tutorial to understand them better.