I've been hitting an annoying issue recently. I have two different maven projects checked out to my development machine. One project depends on the other (let's say Project A depends on Project B), and I actively make changes to both projects. Sometimes though, Project A won't pick up the latest Project B changes. Let's say I make some changes to Project B, I build/install it with...
mvn clean install
I even check my local ~/.m2/repository to see that the jar has been updated. But Project A will still continue to use an older version of Project B. Even though it was just updated... If I remove the entire Project B folder, as in...
rm -rf ~/.m2/repository/project-b/version/
And then build/install Project B again, then at this point my problem is gone. Project A will finally make use of the updated Project B. But I don't want to have to go through this exercise every time. Any clues what could be causing this?
Edit: Here's more or less the relevant parts of the pom.xml for both projects. It's extremely basic.
Project A pom.xml
<project
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"
xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<modelVersion>4.0.0</modelVersion>
<parent>
<groupId>org.opendaylight.mdsal</groupId>
<artifactId>binding-parent</artifactId>
<version>3.0.10</version>
<relativePath/>
</parent>
<groupId>company.group</groupId>
<version>1.0.0-SNAPSHOT</version>
<artifactId>project-A</artifactId>
<packaging>bundle</packaging>
<dependencies>
<dependency>
<groupId>company.group</groupId>
<artifactId>project-B</artifactId>
<version>3.1.0-SNAPSHOT</version>
</dependency>
...
</dependencies>
</project>
Project B pom.xml
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<parent>
<groupId>company.group</groupId>
<artifactId>project-B-parent</artifactId>
<version>3.1.0-SNAPSHOT</version>
</parent>
<groupId>company.group</groupId>
<artifactId>project-B</artifactId>
<version>3.1.0-SNAPSHOT</version>
<packaging>bundle</packaging>
<dependencies>
...
<dependencies>
</project>
Since you are using IntelliJ in the right upper corner there is this maven menu, where you can reimport all dependencies which helps me in this case :)
Try below maven command for loading all updated libraries,
mvn clean install -U
Related
I am completely new to Maven. I am using eclipse 2021-12 and i am trying to follow the installation from this link but do it in eclipse.
However, i am struggling to carry out the first step in eclipse "Install library into your Maven's local repository by running mvn install". I have created a new simple Maven Project and added the dependency code in step 2. And it gave me an error saying missing jar file.
My question is how do i carry out step 1 in eclipse ?
This is how the pom.xml looks like:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 https://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>binance.crypto</groupId>
<artifactId>binance.crypto</artifactId>
<version>0.0.1-SNAPSHOT</version>
<dependencies>
<dependency>
<groupId>com.binance.api</groupId>
<artifactId>binance-api-client</artifactId>
<version>1.0.0</version>
</dependency>
</dependencies>
</project>
The error i am getting is missing artifact com.binance.api:binance-api-client:jar:1.0.0:
Solution:
Clone the project from github and import as a normal project (not maven project) in eclipse
Right Click and run as Maven Install
Then it's completed
I am really new with Maven, and I have set up 2 maven projects, one of them is my utility API, the second is Jersey API. I installed utility API as part of my local Maven repository and added it in the pom.xml file.
Everything is working fine, it's just that when I want to build/run tests I need to go to each directory where projects are and run the commands. Is there a way to run one command or reconfigure the project in a way, so that I am able to process everything just from my REST API directory?
Eg. mvn clean test ... something ... -> goes and tests both of my projects.
Once again, I am new to Maven, but also I did a research and could not find a proper useful information that could help me out. If this is one of those questions that needs to be close, could you please at least provide me with some more information before closing it ? Thank you.
You can use multimodule maven projects. You define a structure like this
/
pom.xml (A)
util-api
pom.xml (B)
jersey.api
pom.xml (C)
In the children pom's you specify a <parent> node.
(A) pom.xml
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>mygroup.id</groupId>
<artifactId>myparentartifact</artifactId>
<packaging>pom</packaging>
<version>0.0.1-SNAPSHOT</version>
...
<modules>
<module>util-api</module>
<module>jersey-api</module>
</modules>
</pom>
(B) pom.xml
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<parent>
<artifactId>myparentartifact</artifactId>
<groupId>mygroup.id</groupId>
<version>0.0.1-SNAPSHOT</version>
<relativePath>../pom.xml</relativePath>
</parent>
<artifactId>util-api</artifactId>
<packaging>jar</packaging>
</pom>
(C) pom.xml
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<parent>
<artifactId>myparentartifact</artifactId>
<groupId>mygroup.id</groupId>
<version>0.0.1-SNAPSHOT</version>
<relativePath>../pom.xml</relativePath>
</parent>
<artifactId>jersey-api</artifactId>
<packaging>jar</packaging>
</pom>
With this configuration you can build all modules with one command: mvn clean install
You can use Maven's aggregation pom.
Are you looking for a command , which can run your test and also build you app with all the module included ?
I thin you are looking for mvn clean install.
Please make sure, you say this in the highest maven pom.xml, which all include all the dependencies.
There is an option to combine related projects into one by having a top level POM using modules feature.
<modules>
<module>utility-api</module>
<module>Jersey-api</module>
</modules>
and can compile and run the test cases with
mvn clean install
You need to create parent POM for your 2 modules with
<packaging>pom</packaging>
so when you run for example mvn install on your parent POM it will run it on it's every child module.
More info on working with multiple modules here
I have an multi-module project in maven, and when I run normal goals on it, everything works fine. For testing, I have an module mytest, and this module is run fine when I run mvn package in the parent directory.
But for not compiling and running everything everytime, I would prefer to run the tests standalone, and to take the packaged files as the dependencies. But if I try to do so using mvn test -Dtest=simpleTest in the test-submodule-directory, the tests are not run, because it can't find the dependencies. After a mvn install in the parent-directory, it finds them, but uses the artifacts from the repository - a behaviour I do not want, because I have to run install everytime. And if I try to run the tests from the parent directory with mvn test -Dtest=simpleTest, it does not find the tests in the other modules, and stops, or, if I add an project-list with -pl test, it just does not find the dependencies again.
Is there any way to run a maven test in a specific submodule, that has dependencies for other submodules, without installing the submodules to the local repository? It would be possible to archieve this by building the comand-line-call for the test onself, but that seems very time-consuming.
/EDIT:
To describe the problem more exactly, I'll add source of a minimal project.
There is a parent pom:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>minimalproject</groupId>
<artifactId>minimalproject</artifactId>
<version>0.1-SNAPSHOT</version>
<packaging>pom</packaging>
<name>minimalproject</name>
<modules>
<module>datamodule</module>
<module>testmodule</module>
</modules>
</project>
a Pom for the module that needs to be tested (in a real-world project, there would be more similiar modules):
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>minimalproject</groupId>
<artifactId>datamodule</artifactId>
<version>0.1-SNAPSHOT</version>
<packaging>jar</packaging>
<name>datamodule</name>
</project>
and a Pom for the modules that tests:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>minimalproject</groupId>
<artifactId>testmodule</artifactId>
<version>0.1-SNAPSHOT</version>
<packaging>jar</packaging>
<name>testmodule</name>
<dependencies>
<dependency>
<groupId>minimalproject</groupId>
<artifactId>datamodule</artifactId>
<version>0.1-SNAPSHOT</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit-dep</artifactId>
<version>4.8.2</version>
<scope>test</scope>
</dependency>
</dependencies>
</project>
There are now two classes, one in datamodule/src/main/java:
public class Thing{
int i = 5;
}
and one in testmodule/src/test/java:
import org.junit.Test;
import junit.framework.Assert;
public class MyTest{
#Test
public void testThing(){
Thing t = new Thing();
Assert.assertEquals(5, t.i);
}
}
When I now run mvn package in the parent folder, everything works fine. But if I run mvn test in the testmodule folder, it crashes because it can't resolve the dependency to the datamodule. If I run mvn install in the parent folder before, it works - but takes the old installed version.
What I want is the ability to run the integration-test in the testmodule, without calling other tests or invoking the build-process of other parts. Is there any possibility to do so?
/EDIT2:
I found out when googling the issue, that one could have done that in maven 2 with the reactor plugin: Build single module from multimodule pom . Anyways, this plugin is not used anymore (http://maven.40175.n5.nabble.com/VOTE-Retire-Maven-Reactor-Plugin-td5789172.html). In fact, like proposed in the first answer, people say one could use profiles to do this: How do you perform a reactor build in Maven3 without a root project?
But, when adding a profile like this:
<profiles>
<profile>
<id>onlyRunTests</id>
<modules>
<module>testmodule</module>
</modules>
</profile>
</profiles>
And runnning it with mvn test -P onlyRunTests, still everything which comes before testing the testmodule (so compiling and running the datamodule) is executed. Unfortunately, this is the behaviour not wanted - I want to call integration tests, not the unit tests from the other modules. So is there any way to do so?
/EDIT 3:
There were two other promising ways to avoid this Problem: building with --pl e.g. --pl testmodule --also-make-dependencies. This does not work either, it does not build the dependencies.
The other way would be defining a path (with systemPath) of the depencies. This does not work, as it only works with absolute paths, and this would make the pom unexecutable under all other systems.
The problem in your build is (based on the example pom files) not a multi-module build cause if you have a multi-module build all your childs need to have a parent which is not the case. In your case you are having an aggregator which is not what you need.
The test module should look like this:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<parent>
<groupId>minimalproject</groupId>
<artifactId>minimalproject</artifactId>
<version>0.1-SNAPSHOT</version>
</parent>
<artifactId>testmodule</artifactId>
<name>testmodule</name>
<dependencies>
<dependency>
<groupId>minimalproject</groupId>
<artifactId>datamodule</artifactId>
<version>${project.version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit-dep</artifactId>
<version>4.8.2</version>
<scope>test</scope>
</dependency>
</dependencies>
</project>
and your datamodule should look like this:
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<parent>
<groupId>minimalproject</groupId>
<artifactId>minimalproject</artifactId>
<version>0.1-SNAPSHOT</version>
</parent>
<artifactId>datamodule</artifactId>
<name>datamodule</name>
</project>
Now if you look at the root and try mvn clean package you should see that the testmodule is build after the datamodule. This is needed as you already determined to let Maven calculate the build order of the artifacts.
I have project with several dependencies on other project.
<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>group1</groupId>
<artifactId>artifact1<artifactId>
<name>RealtyRegistry</name>
<packaging>war</packaging>
<version>1.0.0-SNAPSHOT</version>
<properties>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
</properties>
<dependencies>
<dependency>
<groupId>group1</groupId>
<artifactId>artifact2</artifactId>
<version>1.0.0</version>
</dependency>
<dependency>
<groupId>group1</groupId>
<artifactId>artifact3</artifactId>
<version>1.0.0</version>
</dependency>
</dependencies>
All of them developed by me simultaniously. I add edition to files of all of project and i need to build main project together with dependent ones. How to do that for projects without tree structure?
There can be 2 or more covering trees for projects hierachy, for example: A depends on B,C; D depends on C,E; A and D are independent.
You can build multiple projects together using "Modules". Normally, you would do this by creating a "mother" project with <packaging>pom</packaging> and adding your real project as modules using the <modules> tag. Then, when you build the "mother" project, all modules are automatically built in the right order.
Here is an example from the Maven by Example book:
<groupId>org.sonatype.mavenbook.multi</groupId>
<artifactId>simple-parent</artifactId>
<version>1.0</version>
<packaging>pom</packaging>
<modules>
<module>simple-weather</module>
<module>simple-webapp</module>
</modules>
Note that this requires you to have your modules in subfolders that are named accordingly. For example, you would have the "mother" pom in some folder:
/.../my-project/
and the modules in:
/.../my-project/simple-weather/
/.../my-project/simple-webapp/
For more information, read Chapter 6. A Multi-module Project of the book, it's freely available on the Sonatype website.
i have 3 maven project (starto.commons,starto.hibernate,starto.server) that use some same dependencies and two of then use the thread project(commons).
i try to unit the 3 project to one big maven project (lets call him starto.bigMavenProject for the example)
i mean that:
1) every project stay project on its own bat use the starto.bigMavenProject pom for dependencies
2)when i build (run mvn insatll) starto.bigMavenProject it's build the all three project (starto.commons,starto.hibernate,starto.server).
thanks in advance.
It sounds like you want a Maven parent project for your three projects. I'd suggest taking a look at the POM documentation on inheritance as well as Sonatype's simple example.
Basically, you want a POM for start.bigMavenProject something like this:
<project xmlns="http://maven.apache.org/POM/4.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0
http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>starto</groupId>
<artifactId>bigMavenProject</artifactId>
<packaging>pom</packaging>
<version>1.0</version>
<modules>
<module>commons</module>
<module>hibernate</module>
<module>server</module>
</modules>
</project>
Though you may need to do some additional tweaking to, e.g., your directory structure, etc.
The key thing is your parent POM should have <packaging>pom</packaging> and define each sub-project as a module.