I am testing to see if ANTLR-4.7.1 is working properly by using a sample, provided by my professor, to match these results for the same printed set of tokens:
% java -jar ./antlr-4.7.1-complete.jar HelloExample.g4
% javac -cp antlr-4.7.1-complete.jar HelloExample*.java
% java -cp .:antlr-4.7.1-complete.jar org.antlr.v4.gui.TestRig HelloExample greeting helloworld.greeting -tokens
[#0,0:4='Hello',<1>,1:0]
[#1,6:10='World',<3>,1:6]
[#2,12:12='!',<2>,1:12]
[#3,14:13='<EOF>',<-1>,2:0]
(greeting Hello World !)
However, after getting to the 3rd command, my output was instead:
[#0,0:4='Hello',<'Hello'>,1:0]
[#1,6:10='World',<Name>,1:6]
[#2,12:12='!',<'!'>,1:12]
[#3,13:12='<EOF>',<EOF>,1:13]
In my output, there are no numbers inside < >, which I believe should be defined from the HelloExample.tokens file that contain:
Hello=1
Bang=2
Name=3
WS=4
'Hello'=1
'!'=2
I get no error information and antlr seemed to have generated all the files I needed, so I don't know where I should be looking to resolve this, please help. And I'm not sure if it'll be of use, but my working directory started with helloworld.greeting and HelloExample.g4 and final directory now contains
helloworld.greeting
HelloExample.g4
HelloExample.interp
HelloExample.tokens
HelloExampleBaseListener.class
HelloExampleBaseListener.java
HelloExampleLexer.class
HelloExampleLexer.inerp
HelloExampleLexer.java
HelloExampleLexer.tokens
HelloExampleListener.class
HelloExampleListener.java
HelloExampleParser$GreetingContext.class
HelloExampleParser.class
HelloExampleParser.java
As rici already pointed out in the comments, getting the actual rule names instead of their numbers in the token output is a feature and shouldn't worry you.
In order to get the (greeting Hello World !) output at the end, you'll want to add the -tree flag after -tokens.
When generating the Javadoc, it adds on prefix to the imported class name, as shown below on the first line 'java.lang'.
How to properly disable that?
Have tried adding -noqualifier in Other command line arguments in my IntelliJ popup window but the following error occurred:
javadoc: error - Illegal package name: "/Users"
Below is a snippet from the Javadoc I generated:
public TrainRoute(java.lang.String name,
int routeNumber)
Creates a new TrainRoute with the given name and number.
Should meet the specification of Route.Route(String, int)
Parameters:
name - The name of the route.
routeNumber - The route number of the route.
I know this is an old question, but still relevant. I am aware of two solution which can be used alone or in combination:
To suppress prefixes on java packages use:
-noqualifier java.*
To suppress prefixes and link to the actual Java docs use:
-link https://docs.oracle.com/javase/8/docs/api
Both suppress the java name qualifiers. The second also links to the Oracle docs.
See javadoc options docs for more info.
I am trying to remotely invoke an MBean via a commandline. Right now, I am able to list attributes and operations. For example, I can list all the attributes and operations for HotspotDiagnostic using this command:
java -jar cmdline-jmxclient-0.10.3.jar admin:P#sSw0rd 10.11.12.13:1111 com.sun.management:type=HotSpotDiagnostic
Which gives me this list of Attributes and Operations
Attributes:
DiagnosticOptions: DiagnosticOptions (type=[Ljavax.management.openmbean.CompositeData;)
ObjectName: ObjectName (type=javax.management.ObjectName)
Operations:
dumpHeap: dumpHeap
Parameters 2, return type=void
name=p0 type=java.lang.String p0
name=p1 type=boolean p1
getVMOption: getVMOption
Parameters 1, return type=javax.management.openmbean.CompositeData
name=p0 type=java.lang.String p0
setVMOption: setVMOption
Parameters 2, return type=void
name=p0 type=java.lang.String p0
name=p1 type=java.lang.String p1
But now lets say I want to invoke the dumpHeap operation which takes two parameters p0 and p1 of type string and boolean, respectively. How would I pass those arguments in?
I've tried these:
java -jar cmdline-jmxclient-0.10.3.jar admin:P#sSw0rd10.11.12.13:1111 com.sun.management:type=HotSpotDiagnostic dumpHeap p0=aaa p1=true
java -jar cmdline-jmxclient-0.10.3.jar admin:P#sSw0rd10.11.12.13:1111 com.sun.management:type=HotSpotDiagnostic dumpHeap aaa true
But I'm not sure what the syntax is, or even what I'm supposed to pass for the string parameter. This isn't for anything specific btw. Merely want to learn and understand more about how to leverage these operations from the command line. Any docs and assistance much appreciated.
EDIT: I'm naive. Oracle docs indicate the string param is an output file per this link. But still uncertain about how to pass the parameters into my command.
According to the cmdline-jmxclient documentation:
http://crawler.archive.org/cmdline-jmxclient/ you have to use comma-delimited parameters to pass to your operation.
So in your case if would be:
java -jar cmdline-jmxclient-0.10.3.jar admin:P#sSw0rd10.11.12.13:1111 com.sun.management:type=HotSpotDiagnostic dumpHeap test,true
Take note that there is an present bug in the cmdline jar file that doesn't take into account Java primitives(int, booelean, byte, etc.) and will throw a ClassNotFoundException because it can't find by the primitive name.
If you find yourself coming across this issue you can either apply the patch to the jar code that is documented here: https://webarchive.jira.com/browse/HER-1630. Or simply change the type field in the jmx endpoint code from it's primitive type to it's Wrapper object type (int -> Integer)
In my Skylark rule, I am looking through all my deps - some of them are maven_jar instances defined in my WORKSPACE file. For those, I would like to access the value of maven_jar.artifact, but as far as I can tell it isn't available. Is it possible to get at that value?
For example, if my WORKSPACE has:
maven_jar(
name = "com_google_guava_guava",
artifact = "com.google.guava:guava:20.0",
)
And my BUILD file has something like this:
my_rule(
name = "foo",
deps = ["#com_google_guava_guava//jar"]
)
In the implementation of my_rule, I would like to get the value com.google.guava:guava:20.0.
I think you'll need to file a feature request for this:
https://github.com/bazelbuild/bazel/issues/new
The instance of the maven_jar rule in the workspace file isn't available to the rules in BUILD files, only the rules which the workspace rule generates are (i.e., #com_google_guava_guava//jar). Off the top of my head, maven_jar would have to generate a rule into the jar's workspace which has an attribute with the value of artifact, and that rule would need to create a provider containing that value for other rules to consume.
(There does happen to be META-INF/maven/com.google.guava/guava/pom.xml inside the jar, which seems to have the information you want, but I don't know if you can rely on that for all jars from maven, but either way, the contents of the jar aren't available at analysis time (within the rule implementation))
If I execute set PATH=%PATH%;C:\\Something\\bin from the command line (cmd.exe) and then execute echo %PATH% I see this string added to the PATH. If I close and open the command line, that new string is not in PATH.
How can I update PATH permanently from the command line for all processes in the future, not just for the current process?
I don't want to do this by going to System Properties → Advanced → Environment variables and update PATH there.
This command must be executed from a Java application (please see my other question).
You can use:
setx PATH "%PATH%;C:\\Something\\bin"
However, setx will truncate the stored string to 1024 bytes, potentially corrupting the PATH.
/M will change the PATH in HKEY_LOCAL_MACHINE instead of HKEY_CURRENT_USER. In other words, a system variable, instead of the user's. For example:
SETX /M PATH "%PATH%;C:\your path with spaces"
You have to keep in mind, the new PATH is not visible in your current cmd.exe.
But if you look in the registry or on a new cmd.exe with "set p" you can see the new value.
The documentation on how to do this can be found on MSDN. The key extract is this:
To programmatically add or modify system environment variables, add them to the HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Session Manager\Environment registry key, then broadcast a WM_SETTINGCHANGE message with lParam set to the string "Environment". This allows applications, such as the shell, to pick up your updates.
Note that your application will need elevated admin rights in order to be able to modify this key.
You indicate in the comments that you would be happy to modify just the per-user environment. Do this by editing the values in HKEY_CURRENT_USER\Environment. As before, make sure that you broadcast a WM_SETTINGCHANGE message.
You should be able to do this from your Java application easily enough using the JNI registry classes.
I caution against using the command
setx PATH "%PATH%;C:\Something\bin"
to modify the PATH variable because of a "feature" of its implementation. On many (most?) installations these days the variable will be lengthy - setx will truncate the stored string to 1024 bytes, potentially corrupting the PATH (see the discussion here).
(I signed up specifically to flag this issue, and so lack the site reputation to directly comment on the answer posted on May 2 '12. My thanks to beresfordt for adding such a comment)
This Python-script[*] does exactly that:
"""
Show/Modify/Append registry env-vars (ie `PATH`) and notify Windows-applications to pickup changes.
First attempts to show/modify HKEY_LOCAL_MACHINE (all users), and
if not accessible due to admin-rights missing, fails-back
to HKEY_CURRENT_USER.
Write and Delete operations do not proceed to user-tree if all-users succeed.
Syntax:
{prog} : Print all env-vars.
{prog} VARNAME : Print value for VARNAME.
{prog} VARNAME VALUE : Set VALUE for VARNAME.
{prog} +VARNAME VALUE : Append VALUE in VARNAME delimeted with ';' (i.e. used for `PATH`).
{prog} -VARNAME : Delete env-var value.
Note that the current command-window will not be affected,
changes would apply only for new command-windows.
"""
import winreg
import os, sys, win32gui, win32con
def reg_key(tree, path, varname):
return '%s\%s:%s' % (tree, path, varname)
def reg_entry(tree, path, varname, value):
return '%s=%s' % (reg_key(tree, path, varname), value)
def query_value(key, varname):
value, type_id = winreg.QueryValueEx(key, varname)
return value
def yield_all_entries(tree, path, key):
i = 0
while True:
try:
n,v,t = winreg.EnumValue(key, i)
yield reg_entry(tree, path, n, v)
i += 1
except OSError:
break ## Expected, this is how iteration ends.
def notify_windows(action, tree, path, varname, value):
win32gui.SendMessage(win32con.HWND_BROADCAST, win32con.WM_SETTINGCHANGE, 0, 'Environment')
print("---%s %s" % (action, reg_entry(tree, path, varname, value)), file=sys.stderr)
def manage_registry_env_vars(varname=None, value=None):
reg_keys = [
('HKEY_LOCAL_MACHINE', r'SYSTEM\CurrentControlSet\Control\Session Manager\Environment'),
('HKEY_CURRENT_USER', r'Environment'),
]
for (tree_name, path) in reg_keys:
tree = eval('winreg.%s'%tree_name)
try:
with winreg.ConnectRegistry(None, tree) as reg:
with winreg.OpenKey(reg, path, 0, winreg.KEY_ALL_ACCESS) as key:
if not varname:
for regent in yield_all_entries(tree_name, path, key):
print(regent)
else:
if not value:
if varname.startswith('-'):
varname = varname[1:]
value = query_value(key, varname)
winreg.DeleteValue(key, varname)
notify_windows("Deleted", tree_name, path, varname, value)
break ## Don't propagate into user-tree.
else:
value = query_value(key, varname)
print(reg_entry(tree_name, path, varname, value))
else:
if varname.startswith('+'):
varname = varname[1:]
value = query_value(key, varname) + ';' + value
winreg.SetValueEx(key, varname, 0, winreg.REG_EXPAND_SZ, value)
notify_windows("Updated", tree_name, path, varname, value)
break ## Don't propagate into user-tree.
except PermissionError as ex:
print("!!!Cannot access %s due to: %s" %
(reg_key(tree_name, path, varname), ex), file=sys.stderr)
except FileNotFoundError as ex:
print("!!!Cannot find %s due to: %s" %
(reg_key(tree_name, path, varname), ex), file=sys.stderr)
if __name__=='__main__':
args = sys.argv
argc = len(args)
if argc > 3:
print(__doc__.format(prog=args[0]), file=sys.stderr)
sys.exit()
manage_registry_env_vars(*args[1:])
Below are some usage examples, assuming it has been saved in a file called setenv.py somewhere in your current path.
Note that in these examples i didn't have admin-rights, so the changes affected only my local user's registry tree:
> REM ## Print all env-vars
> setenv.py
!!!Cannot access HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment:PATH due to: [WinError 5] Access is denied
HKEY_CURRENT_USER\Environment:PATH=...
...
> REM ## Query env-var:
> setenv.py PATH C:\foo
!!!Cannot access HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment:PATH due to: [WinError 5] Access is denied
!!!Cannot find HKEY_CURRENT_USER\Environment:PATH due to: [WinError 2] The system cannot find the file specified
> REM ## Set env-var:
> setenv.py PATH C:\foo
!!!Cannot access HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment:PATH due to: [WinError 5] Access is denied
---Set HKEY_CURRENT_USER\Environment:PATH=C:\foo
> REM ## Append env-var:
> setenv.py +PATH D:\Bar
!!!Cannot access HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment:PATH due to: [WinError 5] Access is denied
---Set HKEY_CURRENT_USER\Environment:PATH=C:\foo;D:\Bar
> REM ## Delete env-var:
> setenv.py -PATH
!!!Cannot access HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment:PATH due to: [WinError 5] Access is denied
---Deleted HKEY_CURRENT_USER\Environment:PATH
[*] Adapted from: http://code.activestate.com/recipes/416087-persistent-environment-variables-on-windows/
For reference purpose, for anyone searching how to change the path via code, I am quoting a useful post by a Delphi programmer from this web page: http://www.tek-tips.com/viewthread.cfm?qid=686382
TonHu (Programmer) 22 Oct 03 17:57 I found where I read the original
posting, it's here:
http://news.jrsoftware.org/news/innosetup.isx/msg02129....
The excerpt of what you would need is this:
You must specify the string "Environment" in LParam. In Delphi you'd
do it this way:
SendMessage(HWND_BROADCAST, WM_SETTINGCHANGE, 0, Integer(PChar('Environment')));
It was suggested by Jordan Russell, http://www.jrsoftware.org, the
author of (a.o.) InnoSetup, ("Inno Setup is a free installer for
Windows programs. First introduced in 1997, Inno Setup today rivals
and even surpasses many commercial installers in feature set and
stability.") (I just would like more people to use InnoSetup )
HTH
In a corporate network, where the user has only limited access and uses portable apps, there are these command line tricks:
Query the user env variables: reg query "HKEY_CURRENT_USER\Environment". Use "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" for LOCAL_MACHINE.
Add new user env variable: reg add "HKEY_CURRENT_USER\Environment" /v shared_dir /d "c:\shared" /t REG_SZ. Use REG_EXPAND_SZ for paths containing other %% variables.
Delete existing env variable: reg delete "HKEY_CURRENT_USER\Environment" /v shared_dir.
This script
http://www.autohotkey.com/board/topic/63210-modify-system-path-gui/
includes all the necessary Windows API calls which can be refactored for your needs. It is actually an AutoHotkey GUI to change the System PATH easily. Needs to be run as an Administrator.