I have been attempting to run powershell as my terminal on windows in pycharm, so I did the following:
However, when I try this, it says that it cannot execute my scripts, and hence I get the following error: SecurityError and the Fully Qualified Id is : UnAuthorizedAccess.
This arises from the fact that pycharm's terminal cannot execute my Powershell_profile.ps1 profile file.
How can I successfully run Pycharm's terminal with Powershell?
What I have tried so far, is going into my main powershell directory as in %windir%/system32/WindowsPowerShell/1.0/profile.ps1, and then change it to include the following:
Set-ExecutionPolicy Unrestricted
However, this does not help, and I get the same error when I try to open of pycharm's terminal.
I have also tried to run pycharm as Admin, however this does not solve the problem either, and I get the same aforementioned error.
I've replaced cmd.exe with powershell.exe in a simpler way and hope it can help.
I'm using webstorm2017 and Win10 os.
1.Find the exact location of powershell.exe.In mine and I believe in most computers the location would be C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe.Copy the whole path into your clipboard.
2.In your IDE open File=>Setting=>Tools=>Terminal, and paste the path into "Shell path" blank.
3.Restart the IDE and everything would be ok.
Set-ExecutionPolicy Unrestricted -Scope CurrentUser
I updated the powershell.exe path in IntelliJ -> Settings -> Terminal
Opened a powershell instance in Admin mode.
Executed Set-ExecutionPolicy Unrestricted -Scope CurrentUser
Restarted IntelliJ and the issue was solved.
Step 3 is from ebelanger's answer.
Browse to the PowerShell executable, right-click, run as administrator.
From the prompt, use the same command you tried:
Set-ExecutionPolicy Unrestricted
Once that is done, close PowerShell, and attempt to use it again from your application.
Note:
You can't set the execution policy from a script, as the default execution policy prevents you from running scripts. (even if it's the profile script - still a script)
In PyCharm
File->Settings->Tools->Terminal
Shell path:
"powershell.exe -ExecutionPolicy Bypass"
Then restart PyCharm
In the Default Shell TextBox you can append the execution policy command line option like so:
powershell.exe -Executionpolicy Unrestricted
If you're running on Windows 8 x64 then running both the commands below may help. It worked for me.
Set-ExecutionPolicy Unrestricted
start-job { Set-ExecutionPolicy Unrestricted -Force } -RunAs32
Credit to a comment found here:
Powershell on Windows 7: Set-ExecutionPolicy for regular users
As mentioned in other answers, if after setting powershell.exe as your terimal in IntelliJ → Settings → Tools → Terminal → Shell path it throws UnAuthorizedAccess errors, normal way to solve this is to alter execution policy:
Set-ExecutionPolicy RemoteSigned -Scope CurrentUser
Note that Unrestricted level is the least secure of all, and you're usually can go with RemoteSigned in order to disable unsigned scripts downloaded from the web until you manually remove Internet or Intranet Zone.Identifier from them, usually with Unlock button in file properties.
However, you may run to an occasion when you're not able to change execution policy. Usually that's because of corporate security settings in Active Directory. In PowerShell, that corresponds to scopes MachinePolicy and UserPolicy. A primary symptom of this situation is the following message:
Set-ExecutionPolicy : Windows PowerShell updated your execution policy
successfully, but the setting is overridden by a policy defined at a
more specific scope. Due to the override, your shell will retain its
current effective execution policy of AllSigned. Type
"Get-ExecutionPolicy -List" to view your execution policy settings.
For more information please see "Get-Help Set-ExecutionPolicy".
You can't set execution policies at this scopes with PowerShell or gpedit.msc. Attempts to change this settings directly in registry is also ineffective: they're applied on restart or login, but at the same time they're being re-imported from Active Directory. However, while you won't be able to run arbitrary PowerShell scripts all around, for profiles and other local scripts that's only modified manually there's still a solution:
Run the following command in PowerShell to create ceritificate files root.pvk and root.cer - it will ask you to define and then confirm password to the certificate:
makecert -n "CN=PowerShell Local Certificate Root" -a sha1 -eku 1.3.6.1.5.5.7.3.3 -r -sv root.pvk root.cer -ss Root -sr localMachine
In the same folder, run the following command to import generated certificate files as your self-signed certificate - it will ask for the password you're defined above:
makecert -pe -n "CN=PowerShell User" -ss MY -a sha1 -eku 1.3.6.1.5.5.7.3.3 -iv root.pvk -ic root.cer
Sign your profile script with the following command:
Set-AuthenticodeSignature "[script path]" #(Get-ChildItem cert:\CurrentUser\My -codesign)[0]
When running a script signed with self-ceritificate for the first time, PowerShell will ask you about trusting the certificate like this:
The file [script path] is published by CN=PowerShell User. This publisher is not trusted on your system. Only run scripts from trusted publishers.
[V] Never run [D] Do not run [R] Run once [A] Always run [?] Help (default is "D")
Answer A to always run self-signed certificates.
Now your profile script won't cause any errors. However, note that signing a certificate adds a signature block in the end of your script containing its hash. If you're about to modify the script, remove that block and, after you're done with editing the script, sign it again by repeating step 3.
Specify the shell that will run by default. Here are some examples of different shells:
Bash: /bin/bash
Z shell: /bin/zsh
Bash for Windows: bash.exe
WSL: wsl.exe
PowerShell: powershell
Command Prompt: cmd.exe
Cygwin: "C:\cygwin\bin\bash.exe" --login -i
for more info: https://www.jetbrains.com/help/webstorm/settings-tools-terminal.html
As of this writing (2018-9-20), there is now a PowerShell plugin available here.
I have installed v1.1 in PyCharm v2018.2.3 (Professional), and it seems to work like a charm, no pun intended.
This plugin provides Intellisense-type support of PS1 scripts, as well as an integrated PowerShell terminal. In order to open the terminal, go to Tools > PowerShell Console...
There appears to be no need to muck about with any kinds of settings or permissions in order to get it to work. It Just Works.
You only need to write powershell in the Shell path input, just like in the image, also you can see jetBrains documentation and configure any shell you want.
powershell configuration
For WebStorm and PowerShell 6+ on Windows 10.
Just follow this screenshot and change the default cmd.exe to pwsh.exe from settings. Finally restart the ide. Done!
Related
I'm trying to run a java program on windows in VSCODE. When I click the run button at the top it opens the Java Process Console and runs the following command:
$ cmd /C "c:\Users\user\.vscode\extensions\vscjava.vscode-java-debug-0.31.0\scripts\launcher.bat "C:\Program Files\AdoptOpenJDK\jdk-11.0.10.9-hotspot\bin\java.exe" -Dfile.encoding=UTF-8 #C:\Users\jbree\AppData\Local\Temp\cp_7gau2431e54dxprosf092viw9.argfile com.example.restservice.RestServiceApplication "
It then prints out: Command 'cmd' not found, but there are 16 similar ones., and I'm not too sure what to do afterwards.
I just ran into this exact issue! After some debugging, I found out it's because my terminal (in VS Code) was running off of WSL.
Make sure to check which terminal you're using! If you're trying to run Java locally, then you can configure a default shell ie. bash.
Let me know if this helps.
Edit: I also found this, not sure if it will help, but here you go!
https://stackoverflow.com/a/58058378/11060097
your java debugger is using wsl. and most likely your java is installed on windows. not linux on windows. to fix this for me, i changed the settings for java debugging to use the external console. settings->java debugger->externalTerminal . this will then use the "external windows" setting for vscode. which should use cmd.exe (the windows shell, no linux).
This error happens because you probably have wsl has your standard terminal but it's probably configured to launch cmd using a windows path.
WSL won't understand what that windows path is, so you need to change it using a path structure it can understand
So
hit Ctrl+, to hit the Settings screen
type in terminal to see all the terminal settings
You will see an option called Terminal> External:Windows Exec
Change C:\Windows\System32\cmd.exe to /mnt/c/Windows/System32/cmd.exe
I had this error too and came here initially but I managed to figure out it was an incompatible path issue that was the cause.
I have azure-cli installed in my mac and I can successfully execute all azure commands from cli. I want to do the same from a java application. I have seen examples of using REST endpoints and azure-sdk-for-java. But what I want is to execute the azure-cli commands directly from java.
I tried running 'azure login' from a java program, but I got the following error.
Cannot run program "azure": error=2, No such file or directory
The problem is in a lack of your PATH variable. If you want to enjoy the same "find the command" capabilities that you have on the command line, you need to set it somehow within your Java program: import the PATH variable from the environment, set it within the code you're writing, or whatever mixture covers your needs.
Giving the absolute (full) path is the surest way, but you may not want to read such long command names in your source codes.
#harshithabt Per my experience, the issue was caused by the command azure could not be searched in the directories listed in PATH. There are two ways to solve the issue for running commands in Java, please see below.
Setting up the environment variable PATH for the current shell session or the configuration files ~/.profile(or ~/.bashrc).
If you command export PATH=<your-node-path>/bin:$PATH in a shell session, you only run the Java program with azure command in the current shell session, even run via the Java IDE which must be opened in the current shell session (it means you should open Eclipse via command <your-ide-path>/eclipse).
If you configure the files ~/.profile or ~/bashrc to add the node runtime as below, please make sure the configuration files have been reloaded via command source ~/.profile in a current session or restart sessions via logout & login or reboot.
A simple way is that adding the command links into the dirs listed in PATH, such as /bin. You just need to run the commands below.
sudo ln -s /bin/node /bin/node
sudo ln -s /bin/azure /bin/azure
Then you can run azure-cli command from Java successfully.
In the Process of installing spark 1.0.0 by double clicking the bin/spark-shell windows command script file. Then opened one command prompt file and then immediately closed it self only. Are there any commands required to run this. Could you please tell me step by step process.
First of all, you have to open a terminal. Theorically, you at least have the following on your machine :
cmd (for sure)
powershell (maybe not, if you're using Vista or less).
From there, you have two options :
if you added path_to_spark_folder\bin to your PATH variable (see there for more informations), you can run spark-shell as soon as the console is opened
if you didn't, you'll have to go to path_to_spark_folder\bin yourself, using the cd command.
You now can run spark-shell.
I am facing issue to start my tomcat server in netbeans. I am getting error when I click on start button
"Starting of tomact failed, check whether the /Application/NetBeans/apache-tomcat-7.0.52/bin/catalina/sh and related scripts are executable."
For more details please check screenshot
You should run from the command line / shell if you can though I realize you want to run from Netbeans in this case.
Also make sure that all your .sh scripts are executable (do a chmod) because otherwise they cannot be called.
Lastly, make sure you have the right permissions to run the scripts.
Once you are beyond these checks, you'll possibly get other error messages e.g. your JAVA_HOME or your CATALINA_HOME are not set. These will be easy to fix.
EDIT
To run Tomcat from the terminal,
go to your Tomcat folder (either TOMCAT_HOME or TOMCAT_HOME/bin).
Make sure all .sh scripts are executable (chmod a+x *.sh)
run startup.sh: ./startup.sh or bin/startup.sh (depending on whether you are inside TOMCAT_HOME or inside TOMCAT_HOME/bin)
You can make catalina.sh runnable by executing following command in terminal
chmod 755 <your tomcat location>/bin/catalina.sh
I have jdk1.7.0_07 installed on server(linux). The file permission to ~/bin files are executable(755). However when I tried to execute,
$output = exec("/usr/java/jdk1.7.0_07/bin/java -version 2>&1");
echo $output;
It gives permission denied error, I have tried this,
$output = exec("java -version 2>&1");
echo $output;
Which gives command not found error. While checking my environment variables. I have succesfully added JAVA_HOME = /usr/java/jdk1.7.0_07 and for PATH = /usr/java/jdk1.7.0_07/bin
But,
When I run above mentioned PHP script it keeps giving me those permission denied or command not found error. Any personal experience or clue?
If you are running these commands from the command-line, you probably execute them with your own user permissions. However, when you execute these same commands via a PHP script in a web app, they will be executed with the Apach user (typically www-data) permissions. These means that you cannot rely on the command-line output to debug permission errors unless you can log in as the exact same user that runs your PHP script.
If your OS is CentOS it could come from SELinux.
root#ls:~# /usr/sbin/getenforce
Enforcing
root#ls:~# /usr/sbin/setenforce Permissive
root#ls:~# /usr/sbin/getenforce
Permissive
More detail in https://superuser.com/questions/455935/php-script-cant-run-bash-script-sh-permission-denied
It fixed the problem for me.
It seems you have 2 distinct problems:
If it gives you permission denied error when you give the full path to Java executable, then your permissions are probably incorrect. The most common cause is, somewhere along the path, Apache User (usually www-data) does not have read access. For instance, if www-data does not have read permission for jdk1.7.0_07 directory it can't see (or open) it's child directory called bin.
Regarding the path, it will not work unless permissions are correctly set. However, where did you set your environment PATH? Was it in the user profile?