I reference an HTML file in my code, and access it with:
Path filePath1 = Path.of("./email.html");
When I run the project locally, the project works fine, and the file loads normally. However, when running the project in a Docker container, I get the following error:
java.nio.file.NoSuchFileException: ./email.html
Here is my Docker file for reference
FROM openjdk:11.0-jdk-slim as builder
VOLUME /tmp
COPY . .
RUN apt-get update && apt-get install -y dos2unix
RUN dos2unix gradlew
RUN ./gradlew build
# Phase 2 - Build container with runtime only to use .jar file within
FROM openjdk:11.0-jre-slim
WORKDIR /app
# Copy .jar file (aka, builder)
COPY --from=builder build/libs/*.jar app.jar
ENTRYPOINT ["java", "-Xmx300m", "-Xss512k", "-jar", "app.jar"]
EXPOSE 8080
Thank you for the answers. So this is a Java project, so there is no index.html to add. I tried changing the work directory to /src, but it is still not picking it up
Docker has no access to the filesystem fromm the host OS.
You need to put it in there as well:
COPY ./index.html index.html
There's a couple of options:
Copy the index.html in the docker image (solution by ~dominik-lovetinsky)
Mount the directory with your index.html file as a volume in your docker instance.
Include the index.html as a resource in your app.jar, and access it as a classpath resource.
The last option: including resources as classpath resource, is the normal way webapps work, but I'm not sure if it works for you.
I've generated a Dockerfile with Visual Studio. It runs in Visual Studio just fine and now I'm trying to build it from Windows itself (docker build ., and I tried many combinations). Yet I get the following error:
When I change copy to ./client.csproj it does continue and then I get:
What am I doing wrong? I changed Docker Linux to Windows, changed WSL, and restarted everything.
Dockerfile client
Check your .dockerignore file. Possible it ignores needed files for copy command and you get failed to compute cache key error.
.dockerignore may be configured to minimize the files sent to docker for performance and security:
*
!dist/
The first line * disallows all files. The second line !dist/ allows the dist folder
This can cause unexpected behavior:
FROM nginx:latest
# Fails because of * in .dockerignore
# failed to compute cache key: "/nginx.conf.spa" not found: not found
# Fix by adding `!nginx.conf.spa` to .dockerignore
COPY nginx.conf.spa /etc/nginx/nginx.conf
RUN mkdir /app
# Works because of !dist/ in .dockerignore
COPY dist/spa /app
Belts and suspenders.
The way Visual Studio does it is a little bit odd.
Instead of launching docker build in the folder with the Dockerfile, it launches in the parent folder and specifies the Dockerfile with the -f option.
I was using the demo project (trying to create a minimal solution for another question) and struck the same situation.
Setup for my demo project is
\WorkerService2 ("solution" folder)
+- WorkerService2.sln
+- WorkserService2 ("project" folder)
+- DockerFile
+- WorkerService2.csproj
+- ... other program files
So I would expect to go
cd \Workerservice2\WorkerService2
docker build .
But I get your error message.
=> ERROR [build 3/7] COPY [WorkerService2/WorkerService2.csproj, WorkerService2/] 0.0s
------
> [build 3/7] COPY [WorkerService2/WorkerService2.csproj, WorkerService2/]:
------
failed to compute cache key: "/WorkerService2/WorkerService2.csproj" not found: not found
Instead, go to the parent directory, with the .sln file and use the docker -f option to specify the Dockerfile to use in the subfolder:
cd \Workerservice2
docker build -f WorkerService2\Dockerfile --force-rm -t worker2/try7 .
docker run -it worker2/try7
Edit (Thanks Mike Loux, tblev & Goku):
Note the final dot on the docker build command.
For docker the final part of the command is the location of the files that Docker will work with. Usually this is the folder with the Dockerfile in, but that's what's different about how VS does it. In this case the dockerfile is specified with the -f. Any paths (such as with the COPY instruction in the dockerfile) are relative to the location specified. The . means "current directory", which in my example is \WorkerService2.
I got to this stage by inspecting the output of the build process, with verbosity set to Detailed.
If you choose Tools / Options / Projects and Solutions / Build and Run you can adjust the build output verbosity, I made mine Detailed.
Edit #2 I think I've worked out why Visual Studio does it this way.
It allows the project references in the same solution to be copied in.
If it was set up to do docker build from the project folder, docker would not be able to COPY any of the other projects in the solution in. But the way this is set up, with current directory being the solution folder, you can copy referenced projects (subfolders) into your docker build process.
I had the same issue, I set the Docker environment to Windows in when adding Docker support. Even running in Visual Studio threw error to that. I changed the environment to Linux as my Docker is running in the Windows Subsystem for Linux (WSL).
Then I moved back to the terminal to run the commands.
I was able to resolve this by moving to the Solutions folder (Root folder).
And I did docker build like this:
docker build -t containername/tag -f ProjectFolder/Dockerfile .
Then I did docker run:
docker run containername/tag
Asking for a directory that does not exist throws this error.
In my case, I tried
> [stage-1 7/14] COPY /.ssh/id_rsa.pub /.ssh/:
------
failed to compute cache key: "/.ssh/id_rsa.pub" not found: not found
I had forgotten to add the /.ssh folder to the project directory. In your case you should check whether /client is really a subfolder of your Dockerfile build context.
The following command was failing with failed to compute cache key: not found:
docker build -t tag-name:v1.5.1 - <Dockerfile
Upon changing the command to the following it got fixed:
docker build -t tag-name:v1.5.1 -f Dockerfile .
In my case I found that docker build is case sensitive in directory name, so I was writing /bin/release/net5.0/publish in the COPY instruction and failed with the same error, I've just changed to /bin/Release/net5.0/publish and it worked
Error : failed to compute cache key: "src" not found: not found
in my case , folder/file excluded in .dockerignore
after resolving file from dockerignore able to create image.
In my case, I had something like this:
FROM mcr.microsoft.com/dotnet/aspnet:5.0
COPY bin/Release/net5.0/publish/ app/
WORKDIR /app
ENTRYPOINT ["dotnet", "MyApi.dll"]
And I finally realized that I had the bin folder in my .dockerignore file.
I had the same issue. In my case there was a wrong directory specified.
My Dockerfile was:
FROM mcr.microsoft.com/dotnet/sdk:5.0 AS publish
WORKDIR /app
COPY . .
RUN dotnet publish -c Release -o publish/web src/MyApp/MyApp.csproj
FROM mcr.microsoft.com/dotnet/aspnet:5.0
WORKDIR /app
COPY --from=publish publish/web .
EXPOSE 80
CMD ASPNETCORE_URLS=http://*:$PORT dotnet MyApp.dll
Then I realised that in the second build stage I am trying to copy project files from directory publish/web:
COPY --from=publish publish/web .
But as I specified workdir /app in the first stage, my files are located in that directory in image filesystem, so changing path from publish/web to app/publish/web resolved my issue.
So my final working Dockerfile is:
FROM mcr.microsoft.com/dotnet/sdk:5.0 AS publish
WORKDIR /app
COPY . .
RUN dotnet publish -c Release -o publish/web src/MyApp/MyApp.csproj
FROM mcr.microsoft.com/dotnet/aspnet:5.0
WORKDIR /app
COPY --from=publish app/publish/web .
EXPOSE 80
CMD ASPNETCORE_URLS=http://*:$PORT dotnet MyApp.dll
In my case there was a sneaky trailing whitespace in the file name.
------
> [3/3] COPY init.sh ./:
------
failed to compute cache key: "/init.sh" not found: not found
So the file was actually called "init.sh " instead of "init.sh".
I had a similar issues: Apparently, docker roots the file system during build to the specified build directory for security reasons. As a result, COPY and ADD cannot refer to arbitrary locations on the host file system. Additionally, there are other issues with syntax peculiarities. What eventually worked was the following:
COPY ./script_file.sh /
RUN /script_file.sh
I had faced the same issue.
The reason was the name of the DLL file in the Docker file is case sensitive.
FROM mcr.microsoft.com/dotnet/sdk:5.0 AS build
WORKDIR /src
COPY MyFirstMicroService.csproj .
RUN dotnet restore
COPY . .
RUN dotnet publish -c release -o /app
FROM mcr.microsoft.com/dotnet/aspnet:5.0
WORKDIR /app
COPY --from=build /app .
ENTRYPOINT ["dotnet", "**MyFirstMicroService.dll**"]
This .dll name should match your .csproj file.
This also happens when you don't provide the proper path to your COPY command input. The most important clue I had is that WORKDIR command opens a folder for the container, not in the windows explorer (so it doesn't affect the path you need to specify for the COPY command).
In my Case,
i was doing mistake in '/' and ''. Let me explain
Open your dockerfile (it should be named as dockerfile only, not DockerFile or Dockerfile).
You may have something like this-
FROM mcr.microsoft.com/dotnet/runtime:5.0
COPY bin\Release\net5.0\publish .
ENTRYPOINT ["dotnet", "HelloDocker.dll"]
Replace COPY bin\Release\net5.0\publish . to COPY bin/Release/net5.0/publish .
in my case, it was a wrong Build with PATH configuration e.g. Docker build context
Simple docker script
docker build .
where . is path to build context
Gradle+Docker
docker {
dependsOn build
dependsOn dockerFilesCopy
name "${project.name}:${project.version}"
files "build" // path to build context
}
Gradle+GitHub action
name: Docker build and push
on:
push:
branches: [ main ]
# ...
jobs:
build:
runs-on: ubuntu-latest
# ...
steps:
- name: Checkout
uses: actions/checkout#v2
# ...
- name: Build and export to Docker
uses: docker/build-push-action#v2
with:
# ...
file: src/main/docker/Dockerfile
context: ./build # path to build context
In my case, with Angular project, my project was in the folder called ex: My-Folder-Project and I was putting on Dockerfile COPY --from=publish app/dist/My-Folder-Project .
But of course the correct thing is put the "name" in your package.json like COPY --from=publish app/dist/name-in-package.json .
In my case I changed context, and path of Dockerfile within docker-compose.yml config:
services:
server:
# inheritance structru
extends:
file: ../../docker-compose.server.yml
# I recommend you to play with this paths
build:
context: ../../
dockerfile: ./apps/${APP_NAME}/Dockerfile
...
I am trying to build docker image having following command in Dockerfile
FROM openjdk:13-jdk-alpine AS builder
WORKDIR /app-build
ADD . .
RUN pwd
RUN ./gradlew console:build
RUN ls /app-build/console/build/libs/
It exit with following message
/bin/sh: ./gradlew: not found
The command '/bin/sh -c ./gradlew console:build' returned a non-zero code: 127
you need to place your local directory path where your docker file is located and the path of your code repo in docker build command
docker build -f /home/ubuntu/your_project_repo/Dockerfile /home/ubuntu/your_project_repo/
I am not certain what openjdk:13-jdk-alpine already has in its image, but if does not already contain a ./gradlew executable file, you will need to double-check that the line ADD . . in your Dockerfile is actually copying in the file ./gradlew.
Is ./gradlew stored locally in the same path as your Dockerfile? ADD . . will take all the files in the path of your Dockerfile and copy it over into your custom image.
Another way to check to see if you are copying in the correct files is by building the image and then using a docker exec command to manually check to see what files are in your custom Docker image.
I would use the following command to do this: docker exec -it <name_of_docker_image> bash
I want to execute a file in new docker container lets say i want to execute Hello.java which prints Hello World. I want to execute this file inside new docker container.
docker run -it -v /Hello.class:/Hello.class alpine:latest ls -l
I would fire above command using Runtime class of java.
It shows that Hello.class is a directory.
I want it as a file so that i can execute it inside new docker container.
How to do this??
Hello I would suggest to make a small dockerfile for simplicity.
Step1: Create Dockerfile:
FROM openjdk:7
COPY . .
WORKDIR /usr/src/app
RUN javac HelloClass.java
CMD ["java", "HelloClass"]
Step 2: Building the Docker Container
After you have created both the JavaMain Class and the Dockerfile, you can now use the Docker build command to build your Docker Image.
docker build -t hello-demo .
Step 3: Running the Docker Container
Now, you can use the Docker run command to run your Docker Container.
docker run -it hello-demo
I'm trying to run my Java game in Docker, but when i try to run it i get this error message
Error: Invalid or corrupt jarfile /usr/src/app/v0.0.6 - FINAL.jar
Dockerfile
# Base image
FROM java:8
#COPY . /usr/src/app
#WORKDIR /usr/src/app
# Get Code v0.0.6 from Github
ADD ["https://github.com/JohnnyDeeee/Oils-Well/blob/master/Builds/v0.0.6/v0.0.6 - FINAL.jar", "/usr/src/app/"]
# DEBUG
RUN chmod +x "/usr/src/app/v0.0.6 - FINAL.jar"
RUN ls -al /usr/src/app
# Start the Game
CMD ["java", "-jar", "/usr/src/app/v0.0.6 - FINAL.jar"]
and this is how i build
docker build -t oilswell-v0.0.6 .
and run my image
docker run oilswell-v0.0.6
This is because of the way Github serves files, currently you are pulling this exact page from Github...
https://github.com/JohnnyDeeee/Oils-Well/blob/master/Builds/v0.0.6/v0.0.6%20-%20FINAL.jar
Which if you open it, you'll see it's not your JAR, but the page showing the JAR within the GIT repository. The URL you actually need is...
https://github.com/JohnnyDeeee/Oils-Well/blob/master/Builds/v0.0.6/v0.0.6%20-%20FINAL.jar?raw=true
This will return the actual JAR, rather than the HTML page. So your Dockerfile should look like this...
# Base image
FROM java:8
ADD ["https://github.com/JohnnyDeeee/Oils-Well/blob/master/Builds/v0.0.6/v0.0.6%20-%20FINAL.jar?raw=true", "/usr/src/app/"]
RUN chmod +x "/usr/src/app/v0.0.6 - FINAL.jar"
# Start the Game
CMD ["java", "-jar", "/usr/src/app/v0.0.6 - FINAL.jar"]